Tender For Repair Work In Pooled House Colony Mahoba District - Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete DSR Vol-2 Code-13.88 2 Finishing walls with water proofing cement paint of required shade Old work (one or more coats @ 2.20 kg/10 sqm) complete.DSR Vol-2 Code-13.109.2 3 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour DSR Vol-2 Code-13.81 4 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR Vol-2 Code-13.80 5 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering shuttering finishing and reinforcement-All work up to plinth level.1:2:4 DSR Vol-1 Code-5.1.3 6 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work DSR Vol-1 Code-13.99.1 7 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains of cross bands and face veneers on both faces of shutters: (9.21.1 35mm thck including ISI marked stainless Steel butt hinges with necessary screws.DSR Vol-1 Code-9.21.1 8 Providing and fixing aluminium sliding door bolts, ISI Marked anodised (anodic coating not less the grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete DSR Vol-1 Code-9.96.2 9 Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less the grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc complete DSR Vol-1 Code-9.97.2 10 Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less the grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc complete DSR Vol-1 Code-9.100.2 11 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. DSR Vol-1 Code-22.6 12 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 Cement : 6 coarse sand) 6.3.2 With Modular bricks DSR Vol-1 Code-6.1.2 13 12 mm cement plaster: DSR Vol-1 Code-13.1.1 14 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) DSR Vol-2 Code-14.1 15 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to consturtion site including placing in position and binding all complete above plinth level (5.22c.1 Thermo-Mechanically Treated bars of grade Fe-500D or more .DSR Vol-1 Code-5.22C.1 16 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)DSR Vol-1 Code-14.5.1 17 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR Vol-1 Code-15.23.1 18 Cement concrete flooring 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement sturry, but excluding the cost of nosing of steps etc. complete. ( 40 mm thick with 20 mm nominal size stone aggregate) DSR Vol-1 Code-11.3.1 19 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below DSR Vol-1 Code-15.12.1 20 Providing and fixing on wall face unplasticised rigid PVC conforming toIS: 13592 Type A, inclusing jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. DSR Vol-1 Code-12.41.2 21 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR Vol-1 Code-18.49.1 22 Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufactrurer) of 1st uality conforming to IS: 15622 of approved make in colours such as white, lvory, grey, fume red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. DSR Vol-1 Code-11.37 23 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as per DSR 2023 Code No-8.31 24 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests DSR Vol-1 Code-17.1.1 25 Providing and fixing 15mm G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work DSR Vol-1 Code-18.12.1 26 Providing and fixing 20mm G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work DSR Vol-1 Code-18.12.1 27 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR Vol-1 Code-17.7.3 28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support forDSR Vol-1 Code-18.48 29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. 10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.DSR Vol-1 Code-10.29.1 30 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applyingpriming coat of approved steel primer all complete.DSR Vol-1 Code-10.1 31 Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore DSR Vol-2 Code-18.13.1 32 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid :DSR Vol-2 Code-17.3.1 33 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm DSR Vol-2 Code-17.9 34 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge DSR Vol-2 Code-17.16 A 35 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.18.1 10 litre capacity - White DSR Vol-2 Code-17.18.1 36 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR Vol-2 Code-17.31 37 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m as directed by Engineer-in- charge. DSR Vol-1 Code-2.1.1 38 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.as per DSR 2023 Code No- 2.27 39 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)as per DSR 2023 Code No- 4.1.8
