Tender For Certain B/R Repair/ Replacement Works In Zone B Of Mh Otm Accn Under Ge South Pathankot; 1 Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed. 2 M&L for brick work in cement mortar 1:4 of old size sub class ‘B bricks straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed. 3 All as per description of serial item No. 2 here-in-above but except bricks complete all as specified and directed 4 M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wallsbuilt in cement mortar 1:4, complete all as specified and directed. 5 Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC, complete all as specified and directed. 6 Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed. 7 Taking down shutters not exceeding 1.00 Sqm , complete all as specified and directed. 8 Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and directed. 9 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed. 10 S&F in repairprelaminated 18 mm thick lead free factory made 100 % solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30 % wood colour sheets with densitynot less than 500 Kg/Cum and the weight of sheet of 1 Sqm should be 11 Kg(+- 5%) manufactured by ISO 9001-2015 certified company. The sheet should be 100 % water proof, termite proof ,fire retardant, manufactured by singlelayer extrusion process with excellent screw holding capacityand shore D hardness, complete all as specified and directed. 11 S & F continuouspiano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed 12 S&F for hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and directed. 13 S&F magnetic door catcher for cabinets, complete all as specified and directed. 14 Providing & fixing 12mm thick semi perforated micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dippedgalvanized iron section of 0.33mm thick(galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length3000mm,cross-T of size 15x 32mm oflength 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tmm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge,including Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets complete all as specified and as directed. 15 Providing and fixing tiled false ceiling of size 595x595 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm metal grid of hot dipped galvanized steel sections (galvanized @120gms per sqm both side incl) consisting of 3600mm long main T of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell be 0.25mm thick. PPGI wall angle is fixed align the perimeter of ceilings to walls, partition or columns etc. with rawl plug and wooden screws at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm long dash fastners, 6 mm threaded rod with bolt for hanging arrangement of ceiling at max 1200 mm center tocenter along main T and not more than 150mmwith slipped joints, the last hanger at the end of each main runner should not be greater than 600mm from adjacent wall. than 1200mm long cross T is interlocked between the main T at 600 mm center tocenter to form at grid 1200x600mm and than secondary cross of length 600mm is interlocked at middle of 1200x600mm grid to form grids of 600mmx600mm . cross T at the ends having length more than 600mm are tobe supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x7 to 8mm thick tiles having light refectors of >=75% are placed in the grid incl dismantling of wall and ceiling board (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blanket, any thickness complete all as specified and directed. 16 S&F in repair false ceiling tiles of size 595 x 595 mm 7 to 8 mm thick square shape complete all as directed by engr in charge. 17 S&F in repair grid offalse ceiling at any heigth,changing the broken portion of the grid,making the grid straight in both ways to accommodate false ceiling tiles complete all as sepcified and directed by engr in charge. 18 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life) 19 S&F Factory made Solid PVC Moulded Door Shutterwith wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. 20 S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. withPowder Coating (minimum thickness of powder coating 50 micron & min weight not less than 0.55 kg/Rm), complete all as specified and directed. 21 S & F Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. 22 S & F powder coated Anodised aluminium window and ventilator shutters, side hung type without or with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type 100mm long (2 no.) suitable handle (1 no.) include powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. 23 S &F 5.5mm thick selected quality tinted sheet glass including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.in aluminum partition / doors / windows / ventilators etc. complete all as specified and directed. 24 S & F anodised designer grill (weight of grill shall not less than 2.00 KG/Sqm) of 07 mm dia and aperture of 75mmx75mm fixed with and including aluminum flat section of size 50 x 1.5 mm fixed to aluminium windows Complete all as specified and directed. 25 S&F 3 ways sliding anodized aluminium glazed window shutter with frame & with following specifications all as specified & directed:-(a) window frame 3 track of size 95mmx25mmx1.5mm thick(b) Stiles and rails of size 35mmx25mmx1.5mm(c) 35mmx35mmx1.5mm T section mullion(d) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter.(e) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl aluminium handles with necessary locking arrangement for 01 Nos gauzed shutter.Note:- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive. 26 S & F in repairdoor closer hydraulically regulated, designation No. 3, universal type, Aluminium body suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg & fixed Aluminium (Die cast) body, complete all as specified and directed. 27 M&Lin repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as directed. 28 Refixing Aluminum frame with suitable rawl plugs with brick/concrete wall all as per direction of Engineer-in -charge including finishing Jams surface with existing wall surface complete all as specified and directed. 29 Refixing Aluminum shutter of any dscription exc 1.00 Sqm n exc 2.50 sqm each after Easing and adjusting by opening all side members and refix with cleats and screw in true alignment including existing fitting/fixtures asin the same opening complete withAluminum frameall as specifed & directed 30 S&F for aluminium mortice lock, vertical type 75mm size of 4 lever, complete all as specified and directed. 31 S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. 32 S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed. 33 S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed. 34 S&F steel window/ventilator with tubular frame factory made double shutters of size 79mm x 39mm, 16 gauge rectangular tubular frame withside hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, includingtwo coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 35 S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed. 36 S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc. with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc. sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed. 37 Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. 38 S&F inrepair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required, complete all as specified and directed. 39 S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked, complete all as specified and directed. 40 S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked, complete all as specified and directed. 41 S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed including necessary welding if required . 42 S&F Aluminium alloy, anodised, sliding door bolt 250 mm longwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 43 Hacking outold broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and directed. 44 S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each panes including glass pin, complete all as specified and directed. 45 All as per serial item No. 44 here-in-above but in repair, complete all as specified and directed. 46 S&F in repair sheet glass 3.00 mm thick frosted and glazing with oil putty in square n.exc 0.50 Sqm in each panes including glass pin, complete all as specified and directed. 47 M&L for preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 48 M&L for Preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. 49 S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed. 50 S&FRotational moulded polyethylene water storage tank(cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed. 51 S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site complete all as specified and directed. 52 S&F galvanized mild steel wire cloths 0.46mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or galvanized wire staples complete all as specified and directed. 53 M&L for providing glazed ceramic colouredwall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling ofwall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. 54 M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. 55 M&L for non-skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. Set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles over 15mm thick screed bed in cement mortar 1:4 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. 56 M&L for vitrified 10 mm thick light shade ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. 57 M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, infloor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. 58 M&L for vitrified ceramic tiles, light shade 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, infloor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. 59 Taking down cement plaster on brick or concrete surfacesany description including raking out joints hacking for key scrubbing down with water complete all as specified and directed. 60 M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding upto 7 meter height and curing the surface, complete all as specified and directed. 61 M&L for preparation of new plastered surfaces of wall including cornices plastersand applying two coats of cement base paint over a coat of primer on newly plastered surface of wall and curing after applying each coat upto 7 meter height complete all as specified & directed by Engr-in-Charge. 62 M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and curing the surface, complete all as specified and directed. 63 M&L for preparation of new plastered surfaces of wall including cornices plastersand applying two coats of oil bound distemper over a coat of primer on wall, complete all as specified and directed. 64 M&L for rendering 10mm thick on concrete in CM 1:3in facia or edging of chajjas, ceiling and roof projectionmaking the line in true shapefinished even & smooth without using extra cementincluding scaffolding up to 7 meter height, complete all as specified and directed. 65 M&L for preparation of new plastered surfaces of ceiling, chajjas and roof projectionand applying one coat of oil bound distemper on ceiling, complete all as specified and directed. 66 Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe including S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length, complete all as specified and directed. 67 Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe including S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls, complete all as specified and directed. 68 S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ballscrewed for iron pipe and fixed, complete all as specified and directed. 69 S&F in repair bib taps, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed. 70 S&F in repair angle stop valve, standard of PTMT any colour high pressure screwed foriron pipe of 15mm bore complete all as specified and directed. 71 S&F in repair pillar tapof PTMT any colourscrewed for iron pipe 15mm dia complete all as specified and directed. 72 S&F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover white colour or in matching colour with closet closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. 73 S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 110mm bore PVC P or S trap complete incl making good to floor complete all as specifed and directed. 74 M&L for (a) 15mm thick plaster in cement sand mortar (1:4) mixed with water proofing compoundas approved as per manufacturer’s instructions shall be applied both on floor and wall. The surfaces then shall be cured and allowed to dry. All the joints of pipe shall be sealed properly.(b) Apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane Based Liquid Membrane on floor as well as on wall as per manufacturer’s instructions of make/manufacturers as specified.(c) Manufacturer/approved agencies for water proofing treatment to sunken slab/portion membrane shall be as per approved list (Note:-TheRate included for WPC ) 75 M&L for 50mm thick PCC, type C-1, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface complete all as specified and directed. 76 Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed. 77 M&L for PCC 1:5:10, type E2 using 40mm graded crushed stone aggregate as sunken floors and mass concrete including providing necessary slope/camber as directed and duct for frain of water (pipe for spout will be measured & paid seperately) all as specified & directed. 78 S&F in repair plastic water closet seat cover, back closed pattern with flat bottom,and mild steel chromium plated or aluminized hinging device complete all as specified and directed. 79 S&F in repair vitreous china wash hand basin (flat back or angle back type)colouredof bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. 80 S&Fin repair vitreous china wash hand basin oval shape any size including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in MS brackets complete all as specified. 81 S&F in repairs 10 liters PVC low level flushing cistern( white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm diaflush pipe with coupling and fixed complete all as specified and directed. 82 S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. 83 S&F grating round 125mm size of PTMT (minimum weight 50gms) as in repair, complete all as specified and directed. 84 S&F in repair bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. 85 S&F in repairs 15mm boreAngle valve, cast copper alloy fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. 86 S&F in repair pillar tap, cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. 87 S&F in repairs brass chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. 88 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 89 Supply & Fixing in repair Stainless steel Plate rack 1mm thick of size900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc. complete all as specified and directed. 90 M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement onfair faces of concreteroof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) 91 M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof slab for providing proper slabs, and finishing the surfaces even & smooth without using extra cement, complete all as specified and directed. 92 Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed. 93 Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed. 94 M&L for machine cut Kota stone, stone slab flooring 20-25mm thick overscreed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing, complete all as specified and directed. 95 S&F machine pressed precast concrete interlocking paver blocks with grey cement and pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade rubber moulded complete all as specified and directed.Note: Shapes of interlocking paver block shall be Triangular/ Zigzag/ Hexagon/ or other, Colour of paver blocks, laying pattern approved by Engr-in-Charge. 96 S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed. 97 M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 98 M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.Note:- The rate included for making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. 99 Rounding to edges of stone slabs, one edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed. 100 M&L for Cement concrete 75mm thick type D-2 1:4:8as in sub base/sub floors of tiles/ blocks complete all as specified and directed. 101 M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface/tiles, complete all as specified and directed. 102 M&L for plaincement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed 103 Repair the leakage/seepage/hole/crack of roof sheet of any description and in any position and upto 7.5 m height using Super flash Strip 100 mm wide, complete all as specified and directed. 104 S&F solid PVC Wall lining consisting of 5mm thick printed colour PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings including taking down of old PVC wall lining, preparation of surface, complete all as specified and directed. 105 S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing including taking down of old PVC sheet fillets, complete all as specified and directed. 106 Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed. 107 S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. 108 Dismantling timber scantling 40 Sqcm and over in section inc old wooden trusses, purlins, rafter of any description complete all as specified and directed. 109 M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240, complete all as specified and directed. 110 M&L steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Forming holes with riveted, bolted, or welded attachments, complete all as specified and directed. 111 S&F Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. 112 S&F pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. 113 M&L for Preparation of new steel surfaces of any description exc 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed. 114 S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed. 115 S&F for 110mm bore, PVC (SWR) bends any radius fitting to PVC (SWR) pipes as in repair, complete all as specified and directed. 116 S&F in repair 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. 117 Demolition of Concrete of any description (reinforced) and in any position and M&L for RCC 1:2:4 type B-1 as in Slab supported on wall, beams, column in floor , landings, balconies, canopies, deck slabs and in the shelves, cover slab complete all as specified and directed.. 118 M&L for form work to sides and soffits ofslab, beams, columns, shelves etc.for rough finished surfaces of concrete complete all as specified and directed. 119 M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 120 S&F in repair 32mm bore corrugated PVC waste pipe, complete all as specified and directed. 121 S&F in repair mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. 122 M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth, complete all as specified and directed. 123 S&F in repair Brass chromium plated, wall mixture valve cast copper alloy fancy type for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. 124 Supplied and fixed in repairs Brass chromium plated, fancy type, swan neck wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed 125 S&F in repair sinks couplingof required size 50/65/75/100 mm approved by Engr-in-charge complete all as specified and directed. 126 S&F in repair 25mm outer dia stainless steel bright finished, fancy type decorative drapery rod of thickness 20 gauge fixed to wall with screws, PVC gutty including all necessary fixing arrangement including taking down old curtain rod, complete all as specified and directed. 127 S&F in repairs stainless steel bright finished, fancy type decorative brackets fixed with PVC plug/gutty & screws etc, complete all as specified and directed. 128 S&F in repairs stainless steel bright finished, fancy type decorative end caps fixed, complete all as specified and directed. 129 Refixing of door shutters in same openingof any description exc 1 sqm but not exc 2 sqm eachcomplete all as specified and directed. 130 S&F in repairs elbow operated tap with long handle wall mounted with chrome finish for 15 mm dia pipe complete all as specified and directed. 131 M&L for complete removal of existing treatment internally surface of wall and applying min 1.0 mmthick wall care putty on the surfaces and making surface smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required, all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. 132 M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of oil bound distemper on wall, complete all as specified and directed. 133 M&L for preparation of old plastered or unplastered surfaces of ceilingincluding cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying onecoat of oil bound distemper on ceiling complete all as specified & directed. 134 M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of cement base paint on wall including curing after applying each coat, complete all as specified and directed. 135 S&F in repair beveled edge fancy mirror 5.5 mm thick glass of size 600x450mm of selected quality with four holes and catch nut complete design/shape will be approved by Engineer-in-Charge, complete all as specified and directed. 136 S&F fancy mirror 3 mm thick glass,wall mounted,bevelled, polished of size 900mm x 600mmof selected quality mounted on 6mm AC building board or commercial plywood and fixed to plugs with chromium plated brass screws and cup washers, design/shape will be approved by Engineer-in-Charge complete all as specified and directed. 137 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washer and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 138 S&F sinks made of stainless steel w/o drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes pipe and waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 495mm x 395mm x 195mm complete all as specified and directed. 139 S&F in repair Toilet paper holder with flat recessed type stainless steel including CP screws all as specified and directed. 140 S&F in repair stop valves (ISI marked),15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. 141 S&F in repair PVC tank lid/cover for water storage tank of 500/1000 liters capacity with fixing arrangement complete all as specified and directed. 142 M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. 143 S & F in repair for peg set of 5 Pin Stainless steel Grade, AISI 304, fancy type, superior quality with fixing arrangement complete all as specified & directed. 144 S&F in repair CP towel ring PTMT fixed with and including Chromium plated brass screws andcleats (min wt 90 gms), complete all as specified and directed. 145 S&F in repair Bathroom cabinet Mirror of size 450mmX350mm wall Mounted, ShapeRectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 146 S&F in repair Vitreous China wash down water closet pan and trap with flushing cistern, (pedestal pattern in one piece) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including P and S trap complete including making good to floor, complete all as specified and directed. 147 Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.
