Tender For Construction Of Cafe At Anini; 1 CONSTRUCTION OF ANINI CAFE AT ANINI VIBRANT VILLAGE, DIBANG VALLEY DIST UPPER DIBANG VALLEY, ARUNACHAL PRADESH. 2 Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with upto 3 m depth (with de-watering)approved material.)Ordinary rock (not requiring blasting) 3 PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed,placed in foundation and compacted by vibration including curing for 14 days.) 4 Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications Height 5m to 10m RCC Grade M20, RCC Grade M20 5 Supplying,fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications 6 Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment,wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications 7 Back filling behind abutment,wing wall and return wall complete as per drawing and Technical specification Granular material 8 Add for carriage of materials from Tinsukia to Anini including loading and unloading 9 Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. 10 Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. 11 Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. 12 Providing and laying in foundations and plinth cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. 13 Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin :a) M20 Grd Concrete 14 Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 Grd Concrete 15 Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.M30 Grd Concrete 16 Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M30 Grd Concrete 17 Reinforcement of RCC work including bending, binding and placing in position complete.a)Cold twisted bars. 18 Centring and shuttering including strutting, propping etc and removal of form work for :a)Foundation, footings, bases of columns etc. and mass concrete. 19 Centring and shuttering including strutting, propping etc and removal of form work for :b) Columns 20 Centring and shuttering including strutting, propping etc and removal of form work for :c)Lintels, beams, girders, bressumers and cantilevers etc. 21 Centring and shuttering including strutting, propping etc and removal of form work for :d)Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height). 22 Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand). 23 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., completed) Size of Tile 1000x1000 mm 24 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade,Colour Black, Colour, Ruby RedArea of Slab over 0.50sqm 25 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). 26 Applying one coat of cement primer of approved brand and manufacture on wall surface. 27 Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. 28 Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade. 29 Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade. 30 Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). 31 Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. 32 Provision for electrical installation 33 Supplying and laying of the following types and sizes of 1.1kV grade PVC insulated aluminium conductor armoured cable in ground including excavation & sand cushioning brick protection and refilling etc all complete as required.a)10 sq.mm 4 Core 34 Supplying and laying of the following types and sizes of 1.1kV grade PVC insulated aluminium conductor armoured cable in ground including excavation & sand cushioning brick protection and refilling etc all complete as required.b)6Sq.mm 4 Core 35 Supplying and laying of the following types and sizes of 1.1kV grade PVC insulated aluminium conductor armoured cable in ground including excavation & sand cushioning brick protection and refilling etc all complete as required.c)4Sq.mm 4 Core
