|
| 1 | Anti Scalant (Food Grade)Physical Appearance - clear, light colored, viscous liquid,Anionic Character : non-anionicPH :7 +/- 0.2,Solubility in water : completely soluble Effectiveness: at normal working condition of sugar mills time lag between two general cleanings should be 45 days.Dose: 8 PPMFood grade certificate must be attached |
| 2 | Viscosity Reducer (Fatty Acid/oil based) for A & B Massecuite |
| 3 | Viscosity Reducer (Polyacralamide based) (Food Grade)Certificate for 30% TFM(Total Fatty Matter) must be attached Food grade certificate must be attached. Dose - 900 gm per 40 Ton of C-m/c |
| 4 | Biocides BKC based Active matter should be 50% w/wmaterial ( Food grade)Free amine content -1% Max.Specific gravity -0.97pH-7.5 ±1Pack Size -HDPE carboys -40/50 Kg, |
| 5 | Biocides DTC based Board Spectrum dithiocarbamate base biocide free from any pesticidal residue and approved by FDA. (Food grade) Active matter should be 45% w/w material pH -8.5 , Specific gravity -1.15-1.2,Pack Size -HDPE carboys -40/50 Kg, |
| 6 | Floculant (Food Grade)It should have high molecular weight, non-toxic, anionic, polyacralamide& free flowing white granular powder and its particle size should be 98% less than 1000 Micron, pH at 1% solution should be 6.8 to 7.8, free acralamide less than 0.05%.Lot No., Manufacturing and expiry date should be mentioned on Bags.Dose – 1-2 PPMFood grade certificate must be attached |
| 7 | Magnafloc LT-27 in original and imported packing It should have high molecular weight, non-toxic, anionic, polyacralamide& free flowing white granular powder and its particle size should be 98% less than 1000 Micron, PH at 1% solution should be 6.8 to 7.8 free acralamide less than 0.05%.Lot No., Manufacturing and expiry date should be mentioned on Bags. |
| 8 | Caustic soda flakes Rayon grade confirming to IS/252/1923 having minimum 99.5% purity by weight packed in 50 kg. HDPE bags Make- Grasim/GACL/Tata |
| 9 | Scale Softener - It should be non-foaming type, reduce surface tension, having high penetration of loosening the scale in the evaporator tubes, it should be Completely Soluble in water,pH : 12 +/- 1 (10 % Aqua Solution)Polyacralamide. |
| 10 | Colour Wash (Polymer based) (Food Grade) for addition in Mixed Juice. ICUMSA Colour should be below / equal to 100Dose - 7 PPMFood grade certificate must be attached |
| 11 | Phosphoric acidPhosphoric acid of 85% H3 PO4 and 65% active content (P2O5) (food grade)Make- DCM/GACL/Exel/SIEL/BILT/Ballarpur |
| 12 | Alezine (Food Grade) or equivalent (Specific gravity 1 to 1.25 base polyacramide soluble in water).Dose:- Mixed Juice - 65 gm of Alezine should be equivalent to 1 Kg Phosphoric Acid.For Syrup Clarification system -2 PPM. Food grade certificate must be attached |
| 13 | Antifoam Polymer Based Active content 40% TFM(Total Fatty Matter) Food grade certificate must be attached |
| 14 | Bleaching Powder original packing of the manufacturer (Chlorine %age-30%) DCM/PALL/GACL/Exel/modi/SIEL |
| 15 | Sugar Seed Slurry Size 3 to 5 micron,SP Gravity 1.89gm/ cm3, Coefficient of variation 3% only, It should be prepared in special designed Machine using isopropylalcohal and free from agglomerate.Packed in plastic container |
| 16 | Mazu 400 |
| 17 | Chemical for Syrup Clarification PlantColor Precipitant (food Grade) should be polymer base, discoloring agentDose - 12 PPM |
| 18 | Washing soda 99% sodium carbonate, dosing -11.8 PPM |
| 19 | Rockwine- SQ chemicalSulphmic acid dosing-18.7 PPM |
| 20 | Commercial HCLConsentration 36% - As requireddosing-4.5 PPM |
| 21 | Comman salt Sodium chloride (oderless) solubility 360 gm/ltr (25ᵒ C) dosing -5 PPM |
| 22 | Chemical for Melt Clarification PlantFlocculentMCS-2 pH range -7-8/ food gradedosing -1.8 PPM For floc development in melt clarifier food grade certificate must attached |
| 23 | PH booster(cooling tower) Type-Liquid solubility - water soluble smell- pungent, grade- industrial Dosing-2.25 PPM |
| 24 | Formaldehyde Methanal (organic compound) aqueous solution of 37% formalinDosing- 0.3 PPM |
| 25 | Molasses preservativeMolasses TRS control dosing-1.2 PPM |
| 26 | DextranaseGlycoside hydrolase/food grade dosing -0.3 PPM |
| 27 | Starch20-25% amylase and 75 to 80% amylase pectin/ food grade dosing-4 PPM |
| 28 | Hydrated lime |
| 29 | Industrial Salt |
| 30 | CHEM CHEL |
| 31 | CHEM AS 902 |
| 32 | CHEM DISP (Scale softner) |
| 33 | CHEM PRESS MICRO BIOCIDES |
| 34 | Rodine chemicalAcid corrosion in inhibitor , Dosing – 1.81 PPM |
| 35 | Chem.-clean MS – 2 |
| 36 | NaOCL |
| 37 | SMBS |
| 38 | HCL for RO |
| 39 | Antiscalent– RO-1 |
| 40 | Micron filter ( in Nos.) |
| 41 | Caustic for MB & UF |
| 42 | pH Booster (MB outlet) |
| 43 | Anoin- Resin (FFIP) |
| 44 | Eloguard86 |
| 45 | TSP (Tri sodium phosphate) |
