Providing And Fixing Open Air Gym Equipments At Borebatti Area Of Waigaon Ghoturali Gram Panchayat Under Umrer Sub Area Of Umrer Area. - 1 Item Description/ Heading 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil 3 Supplying and stacking at site Aggregates 63mm- 45mm including all leads complete. 4 Supplying and stacking at site close graded granular sub base material 26.5mm- 9.5mm including all leads complete. 5 Laying, spreading and compacting stone aggregate of specified sizes as per instruction of Engineer- In- Charge. 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 7 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge 8 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 9 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10 Providing and recting verhead signs made out of 2mm aluminum sheet of Class B aluminum sheet bonded with white retroreflective sheeting of Class__(Type IV Highintensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified background,border and backside retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012,with designed back support frame of mild steel angle with vertical and lateral clearance given in clause 801and 802, duly painted on backside with two coats of grey stove enamel paint and installed asper clause 802.6 over a designed support system of structural steelwork trestles and trusses of sections and type as per structural design requirements and approved plansincluding painting with one coat of epoxyprimer and two coats of epoxy finish paint.The nutbolt board with angle ironpost/supporting structure after fixing at site has to be electrically welded. ClassB (Type IV Highintensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screenprinted areas and cut-out sheeting and cut-out durable transparentoverlay film and this warranty certificate in original s should be submitted to the Engineer in charge by the contractor/supplier. This item does not include the cost of structural steelwork required for support system. 11 Supply and fixing Gym equipment that is AIR WALKER SINGLE (AU-02)Length:1050mm,WIDTH :450mm,HEIGHT1200mm , SAFE AREA: 2.0m X1 45m, MAIN FRAME :80mm ID, FOUNDATION SUPPORT : 32mm ID,CONNECTING PIPES :32mm ID (paddle), HANDLE : 23mm ID, BUSHES : dia 60mm made in SE seamless pipe, BEARING : PERMANENT LUBRICATED BEARING 6205 OF REPUTED BRAND, PINS : dia25mm made in bright bar, CIRCLIPS :A 24, BASE PLATE:250mm/10mm thick, FOOTREST: 245 X 113 mm madein ms material, NUT & BOLTS :GI NUT BOLTS OF SIZE 18* 40MM / 18*50 MM, ACCESSORIES: PLASTIC BEARING / CLOSING CAP, POWDER COATING : THE POWDER COATING DONE WITH PURE PP OF REPUTED BRAND 12 Supply and fixing Gym equipment that is LEGSEXERCISER/LEG PRESS DOUBLE(AU-10) Length : 1650mm,Width : 450 mm, Height : 1550mm, Safe area: 2.6x 1.4 m, Center pipe: 100 mm ID, Holepass pipes: 80 mm ID, Fondant support: 32mm ID, Connecting pipe: 32mm ID, Handle: 25 mm ID, Bushes: dia 60 mmmade in seamless pipe, Bearing: permanent lubricated bearing 6205 of reputed brand, Pins : dia 25 mm made in bright bar, Circlips : A 25, Base plate: 250 mm / 10 mm thick Aluminium seats: 320x270 mm & 5 mm thick, Footrest: 245 x 113 mm in ms material, Nut & bolts : GI nut bolts of size 18* 40mm , powder coating: the powder coating done with pure PP of reputed brand 13 Supply and fixing Gym equipment that is KNEE CHAIR ( AU-15) Length : 900mm, Width : 750 mm,Height : 900mm, Safe area: 1.2X 1.2m, Center SUPPORT: 100 mm ID, Holepass pipes: 80 mm ID,Fondant support: 32mm ID, Connecting pipe: 32mm ID, Handle: 25 mm ID,Bushes: dia 60 mmmade in seamless pipe,Bearing: permanent lubricated bearing 6205 of reputed brand, Pins : dia 25 mm made in bright bar,Circlips : A 25, Base plate: 250 mm / 10 mm thick Aluminium seats: 320x270 mm & 5 mm thick,Nut & bolts : GI nut bolts of size 18* 40mm ,/ 18* 50 mm, Accessories: bearing / closing cap/ handle grips, powder coating: the powder coating done with pure PP of reputed brand 14 Supply and fixing Gym equipment that is SKY WALKER DOUBLE/ DOUBLE SKIER(AU-16) Length : 1650mm, Width : 450 mm, Height : 1500mm, Safe area: 6.5 x 1.45 M, Holepass pipes: 80 mm ID, Fondant support: 32mm ID,Connecting pipe: 95 x48 M ,Handle: 32 mm Id, Connecting pipes: 95x 48 mm rectangle pipe, Bushes: dia 60 mmmade in seamless pipe, Bearing: permanent lubricated bearing 6205 of reputed brand, Pins : dia 25 mm made in bright bar, Circlips : A 25,Base plate: 250 mm / 10 mm thick Aluminium seats: 320x270 mm & 5 mm thick, Footrest: 245 x 113 mm made in MS material, Nut & bolts : GI nut bolts of size 18* 40mm ,/ 18* 50 mm, Accessories: bearing / closing cap/ handle grips powder coating: the powder coating done with pure PP of reputed brand 15 Supply and fixing Gym equipment that is DOUBLE SHOULDER WHEEL(AU-20)Length 600 mm, Width 750 mm, Height : 1500 mm,Safe Area : 1.5 Mtr x 1. 75 Mtr, Center Support: 100 mm ID, Holepass Pipe : 80mm ID, Foundation Support 32mm ID,Outer Rings: 25mm ID, Inner Rings : 20mm ID, Bushes : 60mm Made In Seamless Pipe, Bearing: Permanent Lubricated Bearing 6205 of Reputed Brand. Pins : 25mm Made In Bright Bar, Circlips : A 24.Base Plate 250 Mm / 10mm Thick ,. Twister Plate : 300mm/6mm Thick, Nut & Bolts : GI Nut bolts of Size 18+ 40mm/18*50 mm. Accessories: Plastic Bearing / Closing Cap/ Handle Grips., Powder Coating : The Powder c oating done with pure PP of Reputed Brand 16 Supply and fixing Gym equipment that is DOUBLE STANDING TWISTER ( AU-28) Length : 750mm, Width : 650 mm, Height : 1500mm, Safe area : 2.5 x 1.6 M, Center support: 100 mm ID, Holepass pipe :80mm ID, Connecting pipe: 32 mm ID Handle & seat seat frame: 25 mm ID, Bushes: dia 60 mm made in seamless pipe, Bearing: permanent lubricated bearing 6205 of reputed brand, Pins : dia 25 mm made in bright bar, Circlips : A 25, Base plate: 250 mm / 10 mm thick,Twister plate : 300 mm /6 mm thick, Nut & bolts : GI nut bolts of size 18* 40mm, Accessories: plastic caps /handle grips , powder coating: the powder coating done with pure PP of reputed brand 17 Supply and fixing Gym equipment that is SINGLE BAR (AU- 42) Length : 1820 mm, width : 60mm,height :2400mm, safe area : 2.8 x 0.6 M,main frame, foundation pipe : 50 mm ID, horizontal support: 32 mm ID, powder coating: the powder coating done with pure PP of reputed brand 18 Supply and fixing Gym equipment that is PARALLEL BAR (AU- 45) Length : 1850 mm, width : 530mm,height :2000mm, safe area : 3.p x 2.8 M.,main frame, foundation pipe : 50 mm ID, handle frame : 32 mm ID, Accessories: plastic bearing /closing cap/ handle grips, powder coating: the powder coating done with pure PP of reputed brand 19 Supply and fixing Gym equipment that is ARM & PADDALE BIKE (AU- 74) Length : 1500mm, Width : 600 mm, Height : 900mm, Safe area : 1.9 X 1.6 M, Main frame : 50 mm ID, Holepass pipe :80mm ID, Foundation support: 32 mm ID, Handle & seat seat frame: 25 mm ID, Base plate: 300 mm/ 10 mm thick, Bushes: dia 60 mm made in seamless pipe, Settings arrangment: FRP SEAT 3MM THICK RESTED ON 5MM THICK MS PLATE. THE SEATS AND BACK RESTS ARE FITTED ON THE OUTER FRAMES ARE MADE UP OF M.S. SHEET AND DEEP DRAWN AND PRESSED IN TOOLS AND DIES TO HAVE UNIFORM RADIUS OF 20 MM WITH NO SHARP EDGES Bearing: permanent lubricated bearing 6205 of reputed brand, Pins : dia 25 mm made in bright bar, Circlips : A 24, Nut & bolts : GI nut bolts of size 18* 40mm / 18* 50 mm, powder coating: the powder coating done with pure PP of reputed brand 20 Supply and fixing Gym equipment that is LEG LIFT STATI (AU- 47) Length : 1500mm, width : 800mm,height :1800mm, safe area : 2.5 x 1.9 M.,Leg support: 80mm ID, holepass pipe :80 mm ID, all supporting pipe: 25 mm ID, base plate: 250mm / 10 mm thick, Nut & bolts : GI nut bolts of size18* 50 mm, Powder coating: the powder coating done with pure PP of reputed brand 21 Total impact of GST for the purpose of CTC
