|
| 1 | Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS23 & 24, V, VI (S2), VII, 9,10 |
| 2 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc.,complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per Standard Specification TNSS No. 24 & 25. |
| 3 | Plain Cement Concrete of mix 1 : 4 : 8 (One part of Cement four part of sand eight part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 4 | Supplying and FillingofU/S Gravelfromapprovedquarry in Layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per Standard Specification.TNSS No. 24 & 25 |
| 5 | Supplying anderrectingsteel centering including necessary supportsfor plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorsComplying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII |
| 6 | Below Ground Level |
| 7 | Ground Floor |
| 8 | Column |
| 9 | Supplying ribbed tor steel rodsincluding cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works.as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. SS86 & 86A,V, VI (S3) (S6) VII. |
| 10 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -Footing, Plinth beam, Tie beam/Lintel, Ground Floor Roof beam, salbs, Sloped roof beam and slabs30 V, VI (S5)VII & 13 |
| 11 | Below Ground Level mat |
| 12 | Ground Floor |
| 13 | First Floor |
| 14 | Plain Cement Concrete 1:8:16 (one cement eight fine aggregates and sixteen coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 30 V, VI (S5) VII & 13 |
| 15 | Brickworkincementmortor1 : 5(One Cement and five Sand)usingbest quality of countrybricksof size 9\"x41/4x23/4 includingall costof materialsand Labour Charges including Curing charges etc., Complete as per standard specification. 31 & Similar to 31C V, VI (S5) VII |
| 16 | Below Ground Level |
| 17 | Ground Floor |
| 18 | First Floor |
| 19 | Parapet wall |
| 20 | SpecialPlasteringinC.M. 1 : 3 ( One cement, three sand) to10 mmthickincludingallcostandconveyance ofallmaterialstositeincludingcostofcementwhichwillbepurcharedlocallybythe contractor andconveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother TNDSS NO: 56, 57 |
| 21 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.61 V VI, (VIA) 3 |
| 22 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as per standard specification and as directed by the deparmental officers 44 H V, VI, (S5A) VII ,3 |
| 23 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work. 39A |
| 24 | Supplying and fixing in position Cement basedhydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), a and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) 39A |
| 25 | PlasteringinC.M. 1 : 5(1cement 5sand)to12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother Complying with std. specifications.TNDSS NO: 56, 57 |
| 26 | Supplying and Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It mustprovide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. 61 V, VI (S4) 3 |
| 27 | Supply and fixing of M.S Grills for Windows,with one coat of Red oxidePrimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and Steel DoorComplete as Directed by the Departmental Officer. |
| 28 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with GI/1mm 125GSM and100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided inthe louvers. The window should be fixed to the wall with100% packing with screws and silicon packing all round theframes. The ventilator should be got approved from theExecutive Engineer before use on work (PWD SOR Page No.109 Sl No.M -0675) |
| 29 | Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc,in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc,complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved bythe engineer in charge before use on works )( TNSS NO or NBC No 61 V VI (54) 3) |
| 30 | SupplyingandFixingin position best approvedof BIS quality 110mm P.V.C RainWaterdownfallpipe having a pressure of 4Kg / Sq.cm including cost of necessary PVC shoe,PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc, complete. The rate shall be inclusive of cast of removable cast iron grating. The PVc pipe shall be fixed in wall with special type of \"U\"clamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc,CompleteComplyingwithStandardSpecifications. |
| 31 | Dadooing walls withGlazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.39A |
| 32 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. completePWD SORPage No :98 Sl. No : M -0651 |
| 33 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 34 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 35 | Supplying and fixing Teak wood Door Panelled shutter with framefordoorfully panelled with 25mm thick CW Planks ,the door Shutter Styles will be of 75mm X 40mm & Top rail will be of 100 X 40mm the Lock rail will be of 125mm X 40mm and the bottom rail will be 150mm X 40 mm and Frame size 100 X 100 MM and both sides should be finished with 4mm thick venner, including cost of furniture fittings and cost of wind appliances and labour charges for fixing furniture etc., and fixing up shutters in position and Best French (lac) polishing with 2 coats CW. Doors,Windows, Ventilators, including cleaning the surfaces etc. complete complying with standard specifications. |
| 36 | Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricatedfrom un-plasticized polyvinyl chloride (uPVC)sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of2.4mm. The window unit should be designed with allcorner joints mitred and fusion welded. Windowsshould be steel reinforced with 25 x 24 x 25mm steelreinforcement with a thickness of 1mm to havedimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. Theprofiles should have co-extruded seals.Hardware: All the hardware like friction stays, handlesshould be screwed with self tapping screws. Thehandles, locks should be designed so that they cannotbe released from outside.Glazing: The window system should beglazed with5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length andwelded 45 degrees. The window should bedesignedsuch that the water drainage does not pass throughthe reinforcement chamber. The window systemshould be fixed directly to the plastered brick wallusing self expanding nylon plug and driving mselectroplated screws into plug. PWD SOR Page No : 108 Sl. No : M - 0673 |
| 37 | Best French (lac) polishing with 2 coats S.I.361 T.W. Doors,Windows, Ventilators, including cleaning the surfaces etc. complete complying with standard specifications. frenvh polish of approved quality and colour in all floors including the cost of primer etc, complete complying with Standard Specification.( The Make, Quality and colour of paint should be got approved bythe engineer in charge before use on works ) TNDSS No.61 V, VI,S43 |
| 38 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work PWD SORPage No : 109 Sl. No : M - 0673 |
| 39 | Vibrated Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken jelly for flooring including laying,consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers 30 V, VI (S5) VII & 13 |
| 40 | Wiringwith2 x 1.5 Sq.mm (22/0.3)PVCinsulatedSC Unsheathed Cu. Conductor of 1100V grade in cuitable PVC rigidpipe concealed in wall and CeilingwithPVCaccessoires in flushwith wall with 3mm thick Hylum Sheet cover with TW Switch box and 5A F.T. Switch and making good of the Concealed portion with suitable colour for PVC CONCEALEDLIGHTPOINT/FAN POINT (for Electronics Regulator) (SD NO: 25) |
| 41 | Wiringwith2 x 1.5 Sq.mm (22/0.3) PVCinsulated SC Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigidpipe concealed in wall and CeilingwithPVCaccessoires in Flush with wall 150mm x 100mm x 113mm TW Switch box with 3mm thick Hylum sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14SWG TC wire and making good of the Concealed portion with suitable colour for CONCEALED PVC PLUG POINT (SD NO: 38) |
| 42 | Wiring with 2 x 4 sqmm (56 / 0.3mm ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories inflush with wall with 150mm x100mm x75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3pin flush type non inter locking CS plug with continuous earthwire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.etc, complete as per standard specifications. SD 40 |
| 43 | Supplying and Fixing of Horizontal Type 4 way Triple Pole natural MCB distribution board in sheet steel enclosure with 40 amps 4 pole MCB isolator as incoming and 12 Nos.6A to 32 A MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.[ SD 157 ] |
| 44 | Earthing as per PWD standard with an earth electrode of 2 M class ‘B’ GI pipe of diameter not less than 32 mm Complete with necessary masonry work.[ SD 212 ] |
| 45 | Wiring with 2 x 4 sq.mm. (56 / 0.3mm) PVC insulated SC unsheathed copper cable conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for open power plug point[ SD 13 ] |
| 46 | Supplying and Run of 2 of No. 8 SWG GI wire for guarding with cradle withNo 8 SWG GI wire at an equal interval of 1.5m [ SD 75 ] |
| 47 | Supplying and Laying of 3½ x 50 sq.mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ SD 206] |
| 48 | Supplying of 4 x 10 sq.mm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.[ SD 180 ] |
| 49 | Supplying and Run of 2 No of 1 .50 sq.mm [ 22 / 0.30 ) PVC Unsheathed Core Cable of 1100 V grade in suitable PVC rigid pipe of wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting suitable color[ SD 54 ] |
| 50 | Supply and fixng of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete(SD No :129) |
| 51 | Supplying and Fixing of single box type 4 x 20 W LED Light fitting complete with Electronic Choke and Teakwood Round blocks on wall or ceiling with fluorescent tube with PVC unsheathed copper leads from terminals to the fitting.[ PWD SOR Page No ; 168 Sl. No : M 1273 ] |
| 52 | Supplying and Fixing of450 mm (18”) sweep ( light duty ) AC Exhaust Fan complete without provision of hole in the wall[ SD 118 ] |
| 53 | Supplying and Fixing of 1200mm ( 48” ) sweep AC Ceiling Fan complete with stepped electronic 300 W regulator, with 1 M down rod with fan clamp with side plates and cross arm of size450 mm ( 18” )[ SD 106 ] |
| 54 | Geological investigation Charges under depost works to investigate the Weeakly Shandy site for Driiling of Borewell including all cost of materials and all other labour charges atthesiteshownbythedepartment officers.(TWAD Managing Director Lr. No. 2015/AHG - 3/HG/Deposit works/2023/ Dt: 05.05.2023) |
| 55 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc.By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site( Site will be shown by the Departmental officers) INCLUDING CONSTRUCTION OF MUD PIT TWAD SOR Page No : 198 Sl. No ;WD W 0783 |
| 56 | Reaming 140/150mm dia pilot bore to 200mm dia bore as directed by the Departmental officers..TWAD SOR Page No : 199 WD W 0794 |
| 57 | Charges for developing the borewell with air compressor of 300CFM. Capacity (minimum 8 hours )including transportation labour and fuel charges for compressor as directed by the Departmental Officers and conducting yield test by \"V\" notch methods.TWAD Page No : 201 WDW 0833 |
| 58 | Labour charges for inserting200 mm dia OD PVC casing pipes assembly. (with slots and without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste including supplying and packing of pebbles in anular spaces as approved by the Asst.Exe.Engineer. TWAD Page No : 201 WDW 0830, |
| 59 | Supply of the following casing pipes of ISI approved quality with wall thickness not less than 7.5mm to 8.5mm with PVC couplers and cement Paste etc. Complete and including packing the annular space with pebbles quality and size of pebbles and the PVC pipe should be approved by the departmental officer. TWAD Page No : 6 WDM 0027, 0028 |
| 60 | 200mm diaOD PVC Plain casing Pipe (CS) |
| 61 | 200mm diaOD PVC slot casing Pipe (RS) |
| 62 | 200mm diaOD PVC end cap Page No : 10 WDM 0115 |
| 63 | Labour Charges for the Erection of 30 LPM60 mtr (5.00 HP) Head Submersible pumpsetin borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TNICN switches starter, voltmeter,Ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables andtwin earthing as per IE rules., complete and testing the pumpset and trail run for 10 days.TWAD Page No : 103 WDW 0871 |
| 64 | SupplyandfixingofBore Well Submersible motor pumpset with ISI MARK IS 8034,3 Phase panel board - Star delta with Two Level Guard and ProvidingGI Pipe andotheraccessariesincluding all cost of materials and conveyance to site etc., Complete as follows |
| 65 | Supplying Bore Well Submersible motor pumpset with ISI MARK IS NO :14220 Duty 50 lpm x 60 mt head(5.0 HP) as per IS Specificatrion TWAD Page No : 103 WDM 1616 |
| 66 | Supplying of3 Phase panel board - Star delta with Two Level Guard as per IS specification (5.0 HP) TWAD Page No : 119 WDM 1912 |
| 67 | 50mm dia UPVC Column pipe TWAD SOR WD M 0051 p.g no.7 |
| 68 | 50mm UPVC Elbow PWD SOR Page No : 158 Sl.No : M 1113 |
| 69 | 50mm UPVC . Union PWD SOR Page No : 159 Sl.No : M 1130 |
| 70 | 50mm UPVCBend M 1130 |
| 71 | 50mm Gate Valve TWAD SOR Page No : 33 WD M 0618 |
| 72 | 50mm GM N.R.VTWAD SOR Page No : 33 WD M 0619 |
| 73 | 50mm PVC MTATWAD SOR Page No : 10 M 0114 |
| 74 | 50mmPVCend Cap TWAD SOR Page No : 10 M 0115 |
| 75 | 50mm dia GI Flange set TWAD SOR Page No : 32 M 0597 |
| 76 | 50mm M.S. Clamp set TWAD SOR Page No : 32 M 0597 |
| 77 | Supplying and Fixing ofInsulated and Seathed 4 sq.mm (3 Core) Aflat Type Copper cableCable Confirming toIS No : 694/1990 TWAD SOR Page No : 124 WD M 1975 |
| 78 | Supplying laying and jointing PVC Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete. |
| 79 | 32mm PVC 10Kg / cm2 |
| 80 | 32mm PVC.Elbow |
| 81 | 32mm PVC. Bend |
| 82 | 32mm PVC. TEE |
| 83 | 32mm PVC. End cap |
| 84 | 20mm PVC 10Kg / cm2 |
| 85 | 20mm PVC. Bend |
| 86 | 32mmx20mm PVC.reducerTEE |
| 87 | 20mm PVC. TEE |
| 88 | Suppling and fixing in position15mm.diameter PVC screw down tap(heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary. |
| 89 | Supplying and fixing in position first quality and approved variety of 32mm Gun Metal Gate Valve (Heavy type) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. |
| 90 | Supplying and fixing positionPVC Nahani Trap (PVC Nahani Trap of size 100 x 75mm)with stainless steel gratings with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 91 | Supplying and fixing in position best quality 110mm dia P.V.C soil/ waste pipes (6KSC)with Specialshaving ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. |
| 92 | 110 mm dia PVC pipe |
| 93 | 110 mm dia PVC Ellbow |
| 94 | 110 mm dia PVC Tee |
| 95 | Supplying and fixing of 2000 Liters capacity HDPE tank with IS specification IS 10701/96 the tank is meant for outdoor (or)indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all PVC specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.The rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. (The water tank should be got approved by the EEbefore use on work. TWAD Page no ; 87 WD M 1419 |
| 96 | Supply delivery and filling of Brick Jelly 20mm size with standard specification including cost and conveyance of Jelly at site and all labour charges and all other incidential charges etc., complete as per Standard Specification. |
| 97 | Supply delivery and filling of40mm size HBG stone with standard specification including cost and conveyance of Jelly at site and all labour charges and all other incidential charges etc., complete as per Standard Specification. |
| 98 | Supply delivery and filling of20mm size HBG stone with standard specification including cost and conveyance of Jelly at site and all labour charges and all other incidential charges etc., complete as per Standard Specification. |
