Upgradation Of Hdo Office Duroo Baramulla- 1 Earth work in excavation in all kinds of soilby mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides andrammingofbottomsliftupto1.5m,includinggettingoutexcavatedearthand disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work.. 2 Supply and filling ofstone soling in foundation trenches tightlyhandpacked with hand ramming, dressing ,watering incld. carriage of material from source to site of workcomplete 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size)including all carriages. 5 Centering and shuttering including strutting propping etc. and removal of form forfoundation, footings basses of columns etc .For mass concrete including all carriages. 6 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete. 7 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages. 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)including all carriages. 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. 10 Providing and applying white cement based putty2 mm thickof specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incld all carriage from approved source to site of work. 11 Providing and laying Vitrified tiles inSize of tile 600x600 mmsizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) including all carriages from approved source rto site of work.NITCO,ORIENT,SOMANY,KAJARIA or Equivalent Brand. 12 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding incld all carriage from source to site of work. 13 Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-chargeFirst class kail wood including all carriages. 14 Renewing glass panes, with putty and nails wherever necessary including raking out old putty .Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm). 15 Providing and applying Excelemulsioninetrior paint of approved brand and manufacture to give an even shade. Two or more coats on new work including all carriages. 16 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work incld coat of primer whereever required with carriage complee. 17 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover incld all carriages from approved source to site of work. 18 Providing and fixing of Soffits /CGI and Removal of old Ones Complete Job.(0.4 mm) as directed by the site engineer. 19 Providing and fixing of Eves boarding of 30 mm thick incld all carriages. 20 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 incld dismentalling of old ones with carriage complete Job. 21 Providing and fixing of Imported Wooden Paneeling including Budloo Frame work with jionts (2x2 jiosts) incld a coat of Malamine Polishing Complete Job with carriage complete. 22 Providing and fixing of Wooden frame work for two way kilin dryed and chemicaaly seasoned wood incld all carriages complete Job. 23 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge.1:3:6 or richer mix (i/c equivalent design mix) 24 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar 25 Demolishing cement Plaster 1:6 manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in. 26 Sanitary:Providing and fixing GI pipes incld GI fitting complete (Surya/Prakash/Jindal) or Equivalent incld trenching and refilling or applied by the Site EngineerHeavy duty incld cost and carriage complete.15 mm dia GI pipe 27 Providing and fixing GI pipes incld GI fitting complete (Surya/Prakash/Jindal) or Equivalent incld trenching and refilling or applied by the Site EngineerHeavy duty incld cost and carriage complete20 mm dia GI pipe 28 Providing and fixing P.V.C low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as per the directions of site Engineer incld all carriages from source to site of work. 29 Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin of requiredsizewith singlePTMT pillar cock incd Pedastal with carriage complete. 30 Providing and fixing Stainless Steel A ISI304 (18/8)sink of required size as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required as per direction of site Enginer. 31 Providing and fixing PVC soil, waste and vent pipes incld PVC fittings all complete such as Door,Bend,Colar,Clip,plan bend etc(Prince/Phinolex or Equivalent )with cutting and making good the walls etcs. .cost and carriage complete.100mm dia . 32 Providing and fixing PVC soil, waste and vent pipes incld PVC fittings all complete such as Door,Bend,Colar,Clip,plan bend etc(Prince/Phinolex or Equivalent )with cutting and making good the walls etcs. .cost and carriage complete.75mm dia . 33 Supply,filling and spreading of River Bed material (RBM)/Quarry Muckincld watering and compacting with Power road roller 8-10 tonne capacity as per directions of site Engineer incld all carriages. 34 Supply and stacking at site Graded Crushed stone aggregrate of size 63mm -45 mm and stone screening of size 13.2 mm nominal size (type A), stone dust/moorum(Khakbajree) incld laying ,spreading and compacting stone aggregrate of specified sizes to WBM specifiacations in uniform thickness (75 mm ) ,hand picking ,rolling with 3 wheeled road /vibratory roller 8-10tonne capacity in stages to proper grade and camber ,applying and brooming requisitetype of screening /binding material to fill up interstices of course aggregrate ,watering and campacting to the required density incld all carriages from approved source to site of work complete job(crushed from Broken Quarry). 35 Supplyand fixing ofLED Bulbs 15 WattWith Luminous Flux > 2500Lumens of standard quality Make like Philips,Havells,Wipro,Surya, Halonix with all necessary connections. 36 Fan Piont:Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit,Power Factor not less than 0.9, Service Valueincluding safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Polycab/ LUKER USA incld carriage. 37 Heating Point:Wiring forPower Plug with 2.5 SqmFRLS-H PVC Insulated Multi strand Copper Conductor single core cable and4 sq.mm FRLS PVC Insulated copper conductor single core cableof approved quality andISI marked as required. With . 1NO.16Ampone way switch, 2 mm thick PVC Conduit /Channelwith Bends,Junction Boxes,10 Amp S pole MCB,2 way DB MCB and Hylem Sheet/Modular (wireshall be approved before execution of wok by SITEIn-charge Engineer strictly as required) completeincld carriage.The material used should be of Havells or Anchor Brand. 38 Supply, Installation, Testing & Commissioning of MCB 63 AMP of requred Brand as directed by the site Engineerincld all necessary fittings and fixtures with carriage complete. 39 Supply and fixing of of ExternalWire (Supply Line) 7/20 of required Guageofapproved Brand and quality as directed by the site Engineer.
