Tender For Repair To D,E,F Qtrs, Scientist Hostel And Connected Works In Certain Qtr At In Zone B Drdo Township, Mes Qtrs, Ge(I) Office Compllex And Chess Complex, Pcda Comlex At Kanchanbagh, Hyderabad- 1 Note for S. No 01 to 113 :(i) The work shall be done uptoG+5 storied buildings.(ii)The complete welcome maint work (as per direction of Engr-in-Charge) shall to be completed within 10 days from date of receipt of key from sub division. Contractor shall ensure to depute sufficient manpower to complete the assigned work and return back the key within above prescribed schedule/ time period, failing which, a penalty at the rate Rs. 750/per day till the satisfactorily completion of welcome maintenance shall be levied on the contractor and recovery for the same shall be affected from contractors dues. A separate register shall be maintained for recordingthe same and shall be signed by both the contractor or his authorized rep and Engr-in-charge. 2 M&L for preparation of old decorated surface of walls includingremoving of existing nails and filling of holes, crack with wall care putty where required & making good to the surfaces and applying one coat of oil bound distemper completeall as directed. 3 M&L for preparation of the old decorated surface of wallsincludingremoving of existing nails and filling of holes, crack with wall care putty where required & making good to the surfaces and applying two coat of oil bound distemper complete all as directed. 4 M&L for preparation of old decoratedsurfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as directed. 5 M&L for preparation of old decorated surfaces of ceiling cornices, pilasters etc and applying one coat of white wash complete all asdirected. 6 M&L for preparation of old decorated plastered/ unplasterd surfaces of walls including cornices, pilasters etc and applying one coat of colour wash complete all as directed. 7 M&L for complete removal of the existing treatment on walls by scrapping and washing down with water including making good the surfaces and applying a coat of wall care putty to achieve smooth level surface and treating the surface with two coats of oil bound distemper over a coat of alkali resistant primer complete all as directed. 8 M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed. 9 M&L for preparation of old painted Steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed. 10 Cleaning and removal of rust/dust on old wire mesh with water till the blocked holes are open, re-secure the loosed portion by nails, beading and applying one coat of alluminium paintcomplete all as specified and as directed. 11 M&L Rendering 15mm thick in cement mortar CM 1:4in two layer (First coat 10 mm thick and second 5 mm thick) using water proofing compound in 2nd layer @2% by weight of cement and finished fair and evenincluding taking down cement plaster of any description and racking out joints, hacking for key and scrubbing down with water complete including preparation of surfaces and applying two coats of cement base paint over a coat of primer. Note : WPC will be measured and paid separately.Note : Rate quoted shall be inclusive of necessary scaffolding etc up to 4th storied building. 12 M&L for rendering 10 mm thick in CM (1:6) on brick or concrete surfaces finished even and smooth without using extra cement including taking down cement plaster of any description including racking out joints, hacking for key and scrubbing down with water and preparation of newly plastered surfaces of wall and applying twocoats of oil bound distemper over a coat of alkali resistant primer over a coat of luppam fininsh, complete all as directed.Note : Rate quoted shall be inclusive of necessary scaffolding etc up to 4th storied building. 13 M&L for rendering 5 mm thick in CM (1:3) on concrete surfaces as in ceiling finished even and smooth without using extra cement includingtaking down cement plaster on any surfaces, hacking for key and scrubbing down with water complete including preparation of surfaces and applying three coats of white wash complete all as directed.Note : Rate quoted shall be inclusive of necessary scaffolding etc up to 4th storied building. 14 S&F in repair wall mixture 3 in 1 system with telephonic shower cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipecomplete all as directed.Make : PIS 70H of Prayag or equivalent 15 Supply & fixing of UPVC ventilators with top hung glazed and wire mesh shutters made out ofprofile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tensile strength - 43.9N/Sqm, % Elongation at break - 215, Tensile modules - 2840N/Sqm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural modules elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, withpeg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutter fixed with 3 mm thick frosted glass & wire mesh shutter with stain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent completeincl taking down old down old ventilator complete all as specified all as directed. 16 Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tensile strength - 43.9N/sqmm, % Elongation at break - 215, Tensile modules - 2840N/Sqm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural modules elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent completeincl taking down old down old window complete all as specified. all as directed . 17 S&F Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 7.5mm). Profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each all as directed including taking down old window area n.exc 1.50 Sqm each. 18 S&F framed work such as angle iron, grills, gratings, Gates etc., with ends of bars shouldered and/ or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe 290 Gde E-165 including dismantling existing old MS work complete all as directed. 19 M&L for preparation of new or previously untreated steel surfaces of any description, over 10 Cm in width or grith and applying two coats of synthetic enamel paint over one coat of Red oxide primer complete all as directed. 20 Taking down doorchowkhat of area exc 1.5 sqm but not exc 4 sqm each with shutter (without taking off shutter from the frames) complete all as directed. 21 Taking down doorchowkhat of area n exc 1.5 sqm each with shutter (without taking off shutter from the frames) complete all as directed. 22 Taking down shutter of any description of area exc 1 sqmbutn.exc 2 sqm complete all as directed. 23 S&F 1.25mm thick pressed steel door frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC filling 1:3:6 type C0 (using 12.5mm graded stone aggregate) filling in the frames complete all as directed. 24 S&F factory made solidPVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheetreinforced with M.S. Square tube19mm x 19 mm of gauge complete all as specified and as directed. 25 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed. 26 S&F 2nd class hard wood 35 mm thickfactory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneeredpartical board with commercial veneering on both faces The size of rail and stile as per IS :1003 part 1) , kiln seasoned and chemically pressure treated complete all as directed. 27 S&F 2nd class hard wood Glazed skelton shutter 30 mm thick open rebated and prepared to receiveglass, gauze etc. (without sash bars) edges of framing plain,chamfered or rounded fitter with cutand mitred beads foe securing glass all as per section 8,clause 8.24(a) complete all as directed. 28 S&F 30mmthick flush shutters, solid core construction with block boardand plywood face panels, commercial type on both sides complete all as directed. 29 S&F 2nd class hard wood plain, solid, straight wooden chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed.Make:- BIJASAL/ SAL/ BENTEAK 30 M&L for preparation of newwooden surfaces over 10 cm width/girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 31 S&F 3mm thick sheet glass ordinary quality fixed with oil putty and necessary clips/nuts, bolts area not exceeding 0.5Sqm in each pane complete all as directed. 32 S&F 3mm thick Figured glass, pin head type fixed with oil putty and necessary clips, area not exceeding 0.5Sqm in each pane complete all as directed. 33 S&F galvanised mild steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks for wooden doors with nuts and bolts suitable for MS beading for steel windows complete all as directed. 34 M&L forprelaminated particle board 18/19mm thick, interior grade, prelaminated on one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete including dismantling of existing damaged boarding complete all as directed. 35 S&F continuous (piano) hinges of flap width 30mm, mild steel, bright finish or electo galvanised complete all as directed. 36 M&L for 2nd class hard wood plain fillets of cross sectional area exceeding 6 Sqcm but not exceeding 13 sqcm, bull nosed, splayed, chamfered or rounded on one edge or face complete all as directed. 37 S&F in repairs 125mm size aluminium handles, cast type, anodised complete all as directed. 38 S&F in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as directed. 39 S&F in repairs 100mm longMS steel butt hinges complete all as directed. 40 S&F in repairs 125mm longMS steel butt hinges complete all asdirected. 41 S& Fix in repairs floor door stopper of aluminium alloy body and tounge anodised with hard steel spring 150 mm fixed to door complete all as directed. 42 Supply and fix in repairs MS single action spring hingeswith steel wire springs, stove enameled black 125mm long complete with necessary screws/welding complete all as directed. 43 Resecuring the shutters without taking down of any description of area exc 1sqm and n exc 2sqm each after carrying out necessary repair complete all as directed. 44 Taking down shutters of any description of area exc 1sqm and n exc 2sqm each and carry out necessary repair and refixing in same opening complete all as directed. 45 Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame, glazed with oil putty or fixed with beads and height upto 5 floors and S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed. 46 Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and height upto 5 floors and S&F 3 mm thick frosted glass pin headed and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed. 47 S&F in repairs 600 mm x 450 mm beveled edge mirror of selected quality glass 5.5mm thick & fixed with chromium plated brass screws and washer and aluminum beading complete all as directed. 48 S&F in repairs galvanised mild steelwire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with 2nd class hard wood beading suitable for existing wooden doors including making holes/ cutting rusted bolts and nuts on steel windows and provision of new nuts and bolts suitable for MS beading complete all as directed. 49 S&F in repairs 19 mm dia medium grade MS curtain rods, powder coated with brackets, stops, rollers complete all as directed. 50 S&F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as directed. 51 S&F in repairs 40mm dia, aluminium, anodized cupboard knobs fixed with nut, screw and washer complete all as directed. 52 M&L non skid ceramic coloured rectified tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed. 53 M&L for glazed ceramic tiles of size 300x200x7mm mmthickvertical surfaces such as skirting/dado jointed in neat cement slurryand pointed with white or coloured cement to match the colour of the tiles laidon and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles along with backing coat complete all as directed. 54 M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and cutting, polishing, laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed. 55 M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeincluding cutting, rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile along with screed bed complete all as directed. 56 M&L for pain cement concrete 1:4:8 type D2, (using 40 mm graded stone aggregate) as in filling of sunken floors including digging out and removing sunken floor filling and depositing the same at a distance not exceeding 250m away from the outer edge of building complete all as directed. 57 M&L for 10mm thick rendering on concrete/brick surfaces in CM 1:4 duly mixed with water proofing compound @ 2% by weight of cement and finished even and smooth without using extra cement complete all as directed.Note : Water proofing compound shall be measured and paid separately. 58 Supply only integral water proofing compound complete all as directed.Make:- SCOT NO 1/ ACCOPROOF/ IMPERMO 59 M&L for applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1mm, 1st Coat 1:2:3 (Nit bond SBR Chemical 1 ltr, Water 2 Ltrs, Cement 3 Kg) Second Coat 1:3 (Nit bond SBR Chemical 1 ltr, Cement 3 Kg) applied thoroughly without any traces of dirt or laitance as in sunken floors complete all as directed. 60 Taking down existing IWC along with its cement concrete bedding and P or S trap and S&F Orissa pattern vitreous china squatting pan white of size 580x440mm with integral footrest (Excluding flushing cistern ) but including concrete bedding and P or S trap as required including PVC flush pipe, making good the disturbed surfaces to match the adjoining complete all as directed. 61 S&F in repairs 10 ltrs capacity PVC flushing cistern high/low level with inlet, ball valve, float, handle including fitting and fixtures , providing connections to WC and flush pipe without any damage to the existing fittings complete all asdirected. 62 S&F in repairs 15mm dia bib tap, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 105gms) complete all as directed. 63 S&F in repairs 15mm dia pillar tap, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed. 64 S&F in repairs syphon set suitable for PVC low level flushing cistern of any type complete all as directed. 65 S&F in repairs vitreous china wash basin, white, flat back of size 550x400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as directed. (Make : Cera or equivalent) 66 S&F in repairs towel rail 450mm long of PTMT fixed with and including chromium plated brass screws (Minimum weight 170gms) 67 S&F in repairs stainless steel sink of 1.0mm thick for kitchen with out drain board of overall size 495x420mm & bowl size of 410x330mmx160mm including all necessary fixing arrangements as required at site complete all as directed. 68 S&F in repairs stainless steel sink of 1.0mm thick for kitchen with drain board of overall size 1143x510mm and bowl size of 510x405mmx203mm including plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed. 69 S&F Rotational moulded polyethylene water storage tank of 1000 litres capacity, double layered, cylindrical, vertical with closed top hoisted including taking down existing water tank complete all as directed. 70 S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia with 18mm dia chromium plated pipe complete all as directed.Make : Prayag/Seiko/Hindware/ Cera 71 S&F in repairs stainless steel soap dish fixed to walls complete all asdirected. 72 S&F in repairs fancy type 15mm dia stop valves /angle cock / concealed stop cock cast copper alloy chromium plated screwed down high pressure with crown or capstan head screwed both ends for iron pipe complete all as directed. Make :Prayag/Seiko/Hindware/Cera 73 S&F in repairs 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed. Make :Prayag/Seiko/Hindware/Cera 74 S/F in repairs 15 mm diapillar tap cast copper alloy with crown or capstan head, chromium plated screwed down high pressure with orwithout lettered hot or cold withlong screwed shanks andfly nuts screwedfor iron pipe and fixed complete all as directed.Make: Prayag/Seiko/Hindware/Cera 75 S&F in repairs Classic 2 in 1 Bib Cock of 15mm dia with wall flange specificationscomplete all as directed.(Cat No : 6712 of Prayag or equivalent) 76 S&F in repairs steel finish jet spray Health faucet with 1 meter shower tube and clamp complete all as directed(Cat No ; BEA 88 of Prayag or equivalent) 77 S&F in repairs 15mm, 20mm & 25mm GI fittings( nipples, elbows, reducers, Tee, sockets and tank nipples etc ) complete all as directed. Make: Jindal or equivalent 78 S&F in repairs40mm dia waste coupling of PTMTsuitable for wash basin/ sink half or full threaded( minimum weight 60gms) complete all as directed. 79 S&F in repairs chromium platedwaste coupling for kitchen sink/ WHB of32/ 38 mm dia complete all as directed. 80 S&F in repairs 32mm/38mm dia waste pipe for WHB & sink etc complete all as directed.( Length of pipe nexc 1.00mtr) 81 S&F 15mm dia medium grade GI tubing with all fittings and fixturesfixed to walls, ceilings etc including taking down existing pipe complete all as directed. 82 Taking down 15mm diaGI tubing and cleaning and refixing with all fittings and fixturesfixed to walls, ceilings etccomplete all as directed. 83 S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing pipe complete all as directed. 84 Taking down20mm diaGI tubing and cleaning and refixing ofwith all fittings and fixturesfixed to walls, ceilings etc complete all as directed. 85 S&F in repairs MS handlesof sides (L/R) stove enameled black suitable for glazed steel window/ventilator complete all as directed. 86 S&F in repairs MS peg stay stove enameled black suitable for glazed steel window/ventilator complete all as directed. 87 Repair of stuck MS windows and ventilators by removing deposits, rust and applying grease / oil to make shutters and handlesfunctional including welding with box hinges where required complete all as directed. 88 Cleaning and removal of rust on damaged portion of windows, ventilators & hinges on MSframe and making good by welding complete all as directed. 89 Taking out the existing damaged projecting /box type hinges of any size from steel windows and supply and fixing new projecting /box type hinges as required to match with the existing type and pattern duly welded for normal function/operation of windows and making good the disturbed surfaces to match with the existing complete all as directed. 90 S&F Stainless steel plate rack of size 910x 750x 300mmincluding taking down existing steel rack complete all as directed. 91 S&F in repairs CP grating of size 100/110 mm with or without hole including fixing with white cement complete all as specified and as directed. 92 Cleaning the blockage of Gully traps to Manholes of any size and any depth by removing the material (sludge materials) and placing back the manhole cover in position complete all as directed. 93 Cleaning IWC & EWC blockages upto 1st manholes of any length and dia by Roding and removing the materials (sludge) to a distance exc 200m away from the residential area complete all as and directed. 94 Cleaning floor/ Nahanitrap blockages upto 1st manholes of any length and dia by Roding and removing the materials (sludge) to a distance exc 200 Mtrs away from the residential area all as directed. 95 Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as directed. (Make : Prayag) 96 Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrsfrom mouths of circulating pipes etc complete all as directed. 97 M&L date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYY” 98 S & F TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. 99 M&L precast cement concrete 1:2:4 type B1(using 20mm graded stone aggregate ) as in landings, cover slabs for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces including necessary form work and demolition of existing old concrete complete all as directed.Note: Reinforcement shall be measured & paid seperately. 100 M&L for joints offlooring tiles in toilet and bathroom using white cement including racking out old deteriorated cement joints complete all asdirected. 101 M&L for non skid colored ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc 0.38 sqm in floors etc,set & jointed in neat cement slurry and pointed in white or coloured cement to match with the colour or tiles including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles along with screed bed complete all as directed. 102 M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles along with screed bed complete all as directed. 103 M&L 10mm thick (square /rectangular ), coloured polished Vitrified tiles doublecharged grade B1a as directed,area of each tile exceeding 0.18 sqm but not exceeding 0.42 sqm, in floors etcset & jointed in neat cement slurry and pointed in white or coloured cement to match with the colour, laid over and including 15mm thick screed bed in cement mortar 1:6 anddismantling existing tiles along with screed bed complete all as directed. 104 Material and labour for coloured polished Vitrified tiles doublecharged grade B1a as directed,area of each tile exceeding 0.18 sqm but not exceeding 0.42 sqm in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including10mm thick backing coat in cement mortar 1:4 including dismantling existing tiles along with backing coat complete all as directed. 105 S&F in repairs vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, P or S trap,plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as directed. 106 Repair of concealed type flushing cistern of any type by taking down and refixing in same position after repair/replacement of defective parts. Cost of parts area inclusive in quoted rate complete all as specified and directed. 107 Supply and fix in repairs concealed type flushing cistern twin flush concealed flush with knob and frames and all accessories complete all as specified and directed.Cat No: B1110101 of Cera or equivalent 108 Supply and fix in repairs Godrej Mortice lock complete set 7 levers with handles and two keys 109 S & Frepair corner glass shelf with bracket of size 300mm wide with SS railing complete all as specified and directed 110 Supply only Hasp and staple 100 mm size, mild steel, safety type, stove enameled black, including bolt to hinge plate. 111 Supply only stainless steel peg set of 06 hooks complete all as directed 112 S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as directed. 113 Grinding or polishing of old stone surface / terrazo tiles and toping of any type including cutting rubbing and filling the joint with cement and pigment to match the shade of slab complete 114 Cleaning and removal of rust on existing CP fittings with chemical polish complete all as specified and as directed.
