Tender For Restoration & execution of Civil works at SINDHIA - III T.W. L.I.Project under SADAR Block in Balasore District- 1 Earthwork in excavation of foundation & plinth in hardsoil including rough dressing levelling the bed and depositing the excavated soil within initial lead of 50mtr & lift of 1.5mtr etc as per direction of Engineer-in charge 2 Filling foundation and plinth with sand well watered and rammed etc. 3 Cement Concrete (1:4:8) using 4cm size H.G.C.B. metal including cost ,carriage ,royality &curing etc. complete. 4 Cement Concrete (1:2:4) using12cm size H.G.C.B. Chips(both RCC & plan C.C) including cost ,carriage ,royality &curing etc. complete. 5 Fly Ash Brick masonry in CM (1:6) in F & P including cost ,carriage ,royality &curing etc. complete 6 Fly Ash Brick masonry in CM (1:6) in superstructureincluding cost ,carriage ,royality &curing etc. complete 7 2.5CM A.S.flooring with (1:2:4) using 12mm size chips including cost,carriage,royality & curing etc.complete 8 (a) Grade beam/plinth/Bend (Rigid smooth ,centering & shuttering) 9 (b) Lintel(Rigid smooth ,centering & shuttering) 10 (c ) Slab/Chajja(Rigid smooth ,centering & shuttering) 11 (d) Colum/Beam/Piller(Rigid smooth ,centering & shuttering) 12 Supply fitting & placing of on coated HYSD bar (M.S.Rod) including carriage, cutting, bending, binding & tying the grills and placing in position including cost of binding wire 18 to 20 guage etc.complete 13 Dry brick khoawell watered and rammed to 10CM in flooring including cost,convence royality etc.complete 14 2.5cm DPC with C.C. (1:2:4) using 12mm size H.G. chips including cost,convence royality & curing etc.complete 15 12mm thick cement plaster in C,M (1:6) over brick massonary including cost convence roylaity & curring etc. complete. 16 4CM thick grading plastering in CC(1:2:4)using 4.7mm size HGCB chips 17 Cement punning over plastering 18 Cement washing one coat over plastering 19 White washing two coat water Proofing cement paint inside the room. 20 Colour washing two coat with shell lime and colouring materials 21 Priming two coat with approved primer 22 Painting two coats with approved paint over a coat of primer 23 Filling foundation and plinth with exacavated materials 24 Labour charges for jointing and laying the pipe line including testing then after th leak proof and manual carriage of 160 mm diaPVC pipe in all respect etc.& complete. 25 Fitting of starter,mainswitch,Kitkat,rotary swaitch in the pannel box and fixing the pannel box and the pannel foundation connecting tropodure cable with main supply line and S/S cable with S/S Pumpset including transportation materials to the work site etc.complete including Pump Chamber Wiring. 26 Making earthing with required earthing materials like Charcoal,Common salt,Conduit pipe,Soft solder,Alcape,Nuts & Bolts,Cable sockets etc.including excavation of earth pits of size (1.20m x1.20m x3.0m ) for fixing of earthing pipes of size 37.5 mm dia x 3.00M length with required slottings in pipe and fitting with 37.5 mm dia G.I.Flange including excavation of earthing trench for laying of earthing G.I.Wire and filling the trench & pit after fixing of pipes on completion of earthing works incluing supply of all the materials,including transportation etc.complete as per the direction of the site Engineer in charge. 27 Installation of 7.5 HP S/S pumpset by lowering inside the T.W. & fitting with the 100mm dia G.I.Pipe length 25 mtr including cutting,threading of pipes & clamping over the support pillars by T.W clamp & connecting it with the distribution PVC pipe line laid in under ground including fitting of bends,flanges,sockets,valves & special joints as required with Nuts, Bolts, Rubber insuration etc.including transportation of materials,complete as per the direction of the site Engineer in charge. 28 Labour charges for fitting fixing of M.S.Door,Windowshutter 29 Writing for culture nameof Project Data for transperency of P.P. 30 Fitting of PVC shadle with Air release valve etc 31 Earth workin hard soil including dressing and breaking clods and laying in layer not exceeding 0.30 mtr depth 32 7.5 H.P./6.0 K.W. Submmerssible Pump set coupled with totally enclosed Water cooled squirrel cage induction motor with delivery discharge 900 LPM at 25 mtrs. Head with cable, cable clip, support clamp etc. suitable for operation at 415+6% ,-15% volt,3 phase ,50 Hz, AC power supplyas per the particular mentioned in Annexure-A enclosed with ISI mark.. 33 Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt meter,Ameter,MCB in complete shape including Indicator Lamp as per the particular mentioned in Annexure-B enclosed with ISI mark 34 3 core x10mm PVC insulated (HD) armoured Electric Cable with Allumunium conductor for use in 3 phase power system of working voltage upto and including 1100 Volts at 50 Hz confirming to IS 1554 (Pt-5) / 1988 with ISI mark. 35 Tool Box 36 4mm² PVC insulated Copper wire with ISI mark 37 63 Amp Porceline Kit kat Fuse 415 volt with ISI mark 38 63 Amp 415 Volt T.P.Main Switch confirming to IS 4064(pt-I & pt-II) with utilisation category AC-22 with ISI mark and as approved by NESCO 39 2.5 MM² dia 3 core submersible flat cable of ISI 40 M.S Wall base frame with steel cover plate 41 M.S.T.W clamp for clamping 100mm dia G.I.Pipe made out of M.S.Flat of size 10mm x 75mm of length 58 Cm of each with both side limbs of 20 Cm length having 2 Nos 5/8 dia holes in each lim at both side. 42 100mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest Amendments,screwed at both ends as per IS -554 with socketed at one end and the other end protected with plastic threaded protector The socket conforming to IS:1239 (Part-II/1992) with latest Amendment with in random length of 4 to 7 mtrs.should bear ISI Certification and manufacturers name/trademark . . . 43 100mm dia G.I.Bend confirming to IS No.1239 (pt-II/1992) 44 100mm dia G.I.Socket confirming to IS No.1239 (pt-II/1992) 45 100mm dia Screw Boss Flange confirming to IS No.6392/1971 46 100mm dia C.I.Sluice valve confirming to IS-14846/2000,Part-1 with ISI mark ,hand wheel,G.M.fitting,Brass spindle,s/s 410 Spindle 47 100 MM dia N.R.Valve 48 50mm C.I. Air Release Valve with shadle & fitting materials 49 5/8 x 3M.S.Full threaded Nut Bolt(Heavy Duty) 50 1/2 x3 M.S.Full threaded Nut Bolt (Heavy Duty) 51 3mm (1/8) thick Rubber Insertion 52 160mm dia PVC Tail piece 53 Rigid UPVC pipe of 160 mm dia Ivory grey in colour having specific gravity of 1.4 to 1.46 Gm / CC of straight length of 6 M for portable water supplies confirming to IS 4985 / 2000 of BIS - Amendment - 2 Read with Table - I , of IS specification bearing ISI Mark for working presure of 2.5 Kgf/Cm2 as per latest amendment of ISI 4985 including cost of coupler for plain ended pipes or one end plain & other bell ended. The pipe should be tested by CIPET & each pipe should be clearly & indebile marked ink or Stenciled conforming to IS 4985/2000 including transportation and laying at site all complete. 54 160mm dia PVC End cap(6kgf/Cm2)confirming to PL-RPVC-IS 2000F 55 160mm dia PVC Coupler 56 Cost of 160x160x110 PVC Riser with accessories 57 160x110mm dia PVC Reducing Tee 58 110mm dia FTA 59 160x160x160mm dia PVC equal Tee(10kgf/cm²)confirming to IS 4985/2000 60 Cost of 200 x100mm dia T.W.Cap 61 Cost of T.W.safe guard including labour charges 62 Cost of M.S.Door shutter & window shutter with grill including M.S.frame 63 Cost of Primer 64 Cost of paint 65 Cleaning and developing the production wellusing their own compressorcontinuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. 66 Birbed fencing(size 15 x 10 ) with construction of K.B brick boundary wall,Sand filling and metal spreading,Fixing of Iron Grill gate with locking arrangement etc.
