Bids Are Invited For 4C X 50 Sqmm, 1100V, Epr Insulated Type Ie-2, Epr Sheated Type Se-4 , Stranded Tinned Annealed Flexible Circular Shaped Copper Power Cable With Separator Tape Of Polyester Or Other Suitable Material Between Core And Insulation And , Koraput-Odisha

Bids Are invited for 4C X 50 SQMM, 1100V, EPR INSULATED TYPE IE-2, EPR SHEATED TYPE SE-4 , STRANDED TINNED ANNEALED FLEXIBLE CIRCULAR SHAPED COPPER POWER CABLE WITH SEPARATOR TAPE OF POLYESTER OR OTHER SUITABLE MATERIAL BETWEEN CORE AND INSULATION AND OVERALL COLLECTIVE BRAIDED SCREEN ON LAID OF CORES COVERED BY PROOFED COTTON BINDING TAPE AS PER IS 9968 PART-01 LATEST AMENDMENT.THE CABLE SHALL HAVE COLOUR CODING, MARKING, END SEALED AND PACKING IN A NON RETURNABLE DRUM. THE DETAIL SPECIFICATION IS AS PER ATTACHED ANNEXURE-01. 1)BIDDER HAS TO FILL UP AND SUBMIT DULY SIGNED AND STAMPPED ATTACHED ANNEXURE ALONG WITH THE OFFER FOR TECHNICAL EVALUATION. 2)BIDDER HAS TO SUBMIT ALL TYPE TEST REPORT AS PER IS ALONG WITH THE OFFER. 3)BIDDER HAS TO SUBMIT ALL THE ROUTINE TEST CERTIFICATE AND WARRANTY CERTIFICATE ALONG WITH THE SUPPLY OF CABLE. , 4CX150 SQMM HR PVC INSULATED ARMOURED AL. POWER CABLE WITH COLOUR CODING HAVING FOLLOWING SPECIFICATION. 1)VOLTAGE GRADE: 1.1 KV ARMOURED CABLE 2)CONDUCTOR: 4CX150 SQMM STRANDED EC GRADE ALUMINUM CONDUCTOR 3)INSULATION: HR PVC TYPE-C PROVIDED WITH FILLER AS PER IS 5831 4)INNER SHEATH: EXTRUDED HR PVC TYPE ST-2. 5)ARMOURING: SINGLE LAYER GALVANIZED FLAT STEEL STRIP 6)OUTER SHEATH: EXTRUDED HR PVC TYPE ST-2 8)APPLICABLE STANDARD: IS 1554(PART-1)/1988 WITH LATEST AMENDMENT. 9)PACKING: CABLE SHALL BE SUPPLIED IN A NON RETURNABLE DRUM IN SINGLE LENGTH OF 500/- METERS (minimum) WITH SEQUENCIAL METER MARKING AT AN INTERVAL OF 1 METER. 10)MANUFACTURES NAME, VOLTAGE GRADE, YEAR OF MANUFACTUR, SIZE OF CABLE, ISI MARK SHALL BE EMBOSSED ON THE BODY OF THE CABLE 11)THE CABLE ENDS SHALL BE SEALED AGAINST ENTRY OF WATER. 12)APPLICATION: OUTDOOR INSTALLATION (CATEGORY-02) 13)BIDDER TO SUBMIT FILLED IN ANNEXURE-02 DULY SIGNED AND STAMPPED FOR TECHNICAL EVALUATION. 14)BIDDER TO SUBMIT ALL TYPE TEST REPORT AS PER IS ALONG WITH THE OFFER FOR TECHNICAL EVALUATION. 15)BIDDER TO SUBMIT ALL THE ROUTINE TEST CERTIFICATE AND WARRANTY CERTIFICATE ALONG WITH THE SUPPLY OF CABLE. , 16PX1.5 SQMM ANNEALED COPPER CONDUCTOR, HR PVC INSULATED (TYPE-C AS PER IS: 5831),INDIVIDUAL PAIR & OVERALL SCREENED, FR EXTRUDED HR PVC (TYPE-ST2) INNER SHEATHED, GALVANIZED STEEL ROUND WIRE ARMOURED (CONFIRMING TO IS 3975/latest), OVERALL FR HR PVC (TYPE-ST2) SHEATHED SIGNAL CABLE SUITABLE FOR 1.1KV GRADE CONFIRMING TO IS: 1554/PART-1 /88 (LATEST) IN 1000 METER SINGLE LENGTH DRUM CAPACITY. 1)LENGTH OF THE CABLE SHALL BE EMBOSSED/PRINTED ON THE BODY OF THE CABLE WITH SEQUENTIAL METER MARKING (CONFIRMING TO IS: 10418-1982/LATEST). 2)THE CABLE ENDS SHALL BE SEALED AGAINST ENTRY OF WATER. 3)CABLE SHALL BE SUPPLIED IN NON RETURNABLE DRUMS AS PER MANUFACTURER’S STANDARD. EACH DRUM PACKING LENGTH SHALL BE 1000 METER. 4)THE DETAIL TECHNICAL SPECIFICATIONS ARE AS PER ATTACHED ANNEXURE-03. 5)BIDDER TO SUBMIT FILLED IN ANNEXURES DULY SIGNED AND STAMPPED FOR TECHNICAL EVALUATION. 6)BIDDER TO SUBMIT ALL TYPE TEST REPORT AS PER IS ALONG WITH THE OFFER FOR TECHNICAL EVALUATION. 7)BIDDER TO SUBMIT ALL THE ROUTINE TEST CERTIFICATE AND WARRANTY CERTIFICATE ALONG WITH THE SUPPLY OF CABLE. , 3C x 2.5 SQMM MULTISTRAND ARMOURED COPPER CABLE WITH FOLLOWING SPECIFICATIONS: 1)VOLTAGE GRADE: 1.1 KV ARMOURED POWER CABLE 2)CONDUCTOR: 3 CORE x 2.5 SQMM MULTISTRAND ANNEALED ELECTROLYTIC GRADE COPPER CONDUCTOR 3)INSULATION: HEAT RESISTANT PVC (HR PVC) TYPE-C AS PER IS:5831, COLOUR CODED. 4)INNER SHEATH: EXTRUDED PVC COMPOUND TYPE ST-1 AS PER IS:5831 5)ARMOURING: GALVANIZED MILD STEEL (G.I.) ROUND WIRE / FLAT STRIP ARMOURING, AS PER IS:1554 (PART-1) 6)OUTER SHEATH: PVC OUTER SHEATH TYPE ST-1 OR ST-2 (AS REQUIRED) WITH BLACK COLOUR, SUITABLE FOR OUTDOOR INSTALLATION 7)APPLICABLE STANDARD: IS:1554 (PART-1):1988 WITH LATEST AMENDMENTS. 8)PACKING: CABLE SHALL BE SUPPLIED IN SINGLE LENGTHS OF 500 METERS(MINIMUM) NON-RETURNABLE DRUMS. 9)MARKING: CABLE SHALL HAVE CONTINUOUS SEQUENTIAL METER MARKING AND EMBOSSING OF CABLE SIZE, MANUFACTURERS NAME, VOLTAGE GRADE, ISI MARK, AND YEAR OF MANUFACTURE AT REGULAR INTERVALS 10)SEALING: BOTH CABLE ENDS SHALL BE PROPERLY SEALED TO PREVENT ENTRY OF MOISTURE / WATER 11)APPLICATION: SUITABLE FOR POWER SUPPLY IN INDUSTRIAL AND COMMERCIAL INSTALLATIONS, BOTH INDOOR AND OUTDOOR. 12)BIDDER TO SUBMIT FILLED IN ANNEXURE-05 DULY SIGNED AND STAMPPED FOR TECHNICAL EVALUATION. 13)BIDDER TO SUBMIT TYPE TEST REPORT AS PER IS ALONG WITH THE OFFER FOR TECHNICAL EVALUATION. 14)BIDDER TO SUBMIT ALL THE ROUTINE TEST CERTIFICATE AND WARRANTY CERTIFICATE ALONG WITH THE SUPPLY OF CABLE Total Quantity : 6100

Refer document

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB