Bids Are Invited For Title 1 Providing Office Modular Workstation, With Partition Thickness As 52.4 Mm Thk And Ht-1200 Mm Including Powder Coated Aluminium Trims. Fine: Out Of 22.5 Mm Thick Panel Formed Out Of Blocks Which Are 18 Mm Thick Plb Boards Wra, Hyderabad-Telangana

Bids Are invited for TITLE 1 Providing OFFICE modular workstation, with partition thickness as 52.4 mm thk and Ht-1200 mm including powder coated aluminium trims. FINE: Out of 22.5 mm thick panel formed out of blocks which are 18 mm thick PLB boards wrapped with fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom Tile is finished in metal finish. Split Tiles on main spine: Combination of two finishes for the Top tiles on the user side shall be split fabric tackable along with split Clear Glass Tile. Intermediate Blocks on main spine Intermediate blocks are given in fabric + Fabric finsh. WIRE Management provision through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Workstation LEGS - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Out of 25 mm thick prelam particle board with flat PVC lipping edge banding of size W1500 x W 1200 x D600 mm 3Draw Metal Pedestals with flat metal front, full height free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3Draws = 2Box + 1File. KBPT made up of plastic/metal/articulated. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. 4 TITLE 2 Providing OFFICE modular workstation, with partition thickness as 52.4 mm thick and Height-1200 mm including powder coated aluminium trims. Solit Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split Clear Glass Tile. Intermediate blocks on main spine Intermediate blocks are given in Fabric + fabric finsh. Wire Management Provision through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Workstation LEGS - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size W1200 x D600 mm 3Draw Metal Pedestals with flat metal front, full height free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3Draws = 2Box + 1File. KBPT made up of plastic/metal/articulated. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. 6 TITLE 3 Providing OFFICE modular workstation, with partition thickness as 52.4 mm thick and Height-1200 mm including powder coated aluminium trims. Solit Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split Clear Glass Tile. Intermediate blocks on main spine Intermediate blocks are given in Fabric + fabric finsh. Wire Management Provision through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Workstation LEGS - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size W900 x D600 mm KBPT made up of plastic/metal/articulated. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. TITLE 4 Providing Mesh High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam.SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features 360° revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort Till tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variable sit angle to the chair Seat/back tilting ratio of 1:2. The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron). HEADREST The Headrest sub-assembly is made up of injection moulded glass filed Polypropylene which is upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it is assembled over GRETA 20F The complete headrest assembly is retro fic to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W)-76.0cm, DEPTH (D) - 76.0cm, HEIGHT (H) - 114.0 cm-123.5cm,SEAT HEIGHT - 43.5 - 54.0cm. 10 TITLE 5 Providing Mesh Full Back Chair : SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 101.5-111.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM. 22 TITLE 6 Providing Metal Storage unit with overall size shall be W 916 x D 486 x H 1981mm with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. Total Quantity : 59

Refer document

INR 17 Lakhs /-