}

Tender For Renovation Of Sc St Obc Section At 2Nd Floor Of Alipurduar Sdo Office Bcw And Td Section Under Alipurduar District - 1 Supplying, Fitting And Fixing Boiling Water Resistant Ply Conforming To Is: 303- 1989 Bonded With Phenol Formaldehyde Synth, alipurduar-West Bengal

District Magistrate has published Tender For Renovation Of Sc St Obc Section At 2Nd Floor Of Alipurduar Sdo Office Bcw And Td Section Under Alipurduar District - 1 Supplying, Fitting And Fixing Boiling Water Resistant Ply Conforming To Is: 303- 1989 Bonded With Phenol Formaldehyde Synth. Submission Date for this Tender is 14-07-2025. Building Work Tenders in alipurduar West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

50041915
Tender For Renovation Of Sc St Obc Section At 2Nd Floor Of Alipurduar Sdo Office Bcw And Td Section Under Alipurduar District - 1 Supplying, Fitting And Fixing Boiling Water Resistant Ply Conforming To Is: 303- 1989 Bonded With Phenol Formaldehyde Synth
Tender
Indian
West Bengal
Alipurduar
14-07-2025

Tender Documents

Tender Details

tender for Renovation Of Sc St Obc Section At 2Nd Floor Of Alipurduar Sdo Office Bcw And Td Section Under Alipurduar District - 1 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] 12 MM2nd Floor 2 Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)(B) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -1990. b) Interior Grade, 9mm thicke 3 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).k) Movable door shutter. 4 ii) Door Frame (Top & slide) 5 ii) shutter :Top rail 6 ii) shutter: Bottom rail 7 ii) shutter: Lock rail 8 ii) shutter: Door Vertical 9 ii) shutter: Galzing cleap 10 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.) 11 Top Bottom and Side Member 12 Intermediate Member 13 Glazing clip 14 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).Sal: Local 15 Copal varnish of approved quality including preparing surface : (i) On new wood work :b) Two Coats 16 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white) 17 Add GST 18 Add Labour Cess

Key Value

Document Fees
Refer document
EMD
INR 11034.0 /-
Tender Value
INR 5.51 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail