Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-07-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-08-2025 |
| 2 | 14-07-2025 | Corrigendum | BOQ | 25-07-2025 |
| Sl. No. | Item Description |
| 1 | Supply and fixing ofaluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down unserviceable existing door etc complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plugwidth;- 85x44.5x1.20 mm thickBottom;- 100x44.5x1.20 mm thickStyle;- 85x44.5x1.20 mm thickGlazing beading;- 0.70 mm thickAluminium handle \"D\" type ;- 150mmAluminium tower bold 9.9 mm dia shoot 200 mm longMortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleataluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface shall be included in the quoted rate for item complete all as specified ad directed.(ii) PCC shall be measured and paid seperately.(iii) Work will be carried out upto 5th storey.Make: (i) Anodised aluminum section : Jindal / Hindalko/ Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata |
| 2 | Supply and fixing ofaluminium anodised partition with frame, (fixed type) shutter,and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc complete all as specified and directed of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottuom section;-100x44.5x1.22 mm thickMake: (i) Anodised aluminum section : Jindal / Hindalko/ Indalco.(ii) Particle board: Green ply/Kit ply/ Century ply(iii) Glass: Saint gobain / Modi guard / Tata . (iv) Work will be carried out up to 5th storey |
| 3 | Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed |
| 4 | Taking down Chowkats with shutter of any description exceeding 1.50 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed |
| 5 | Taking down shutter of any description,not exc. 1 Sqmeach complete all as specified and directed |
| 6 | Taking down shutter of any description,exc. 1 Sqmbut n. exe 2 sqm each complete all as specified and directed |
| 7 | Supply and fixing ofpressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., framed filled in cement concrete1:2:4, type B-0 using 12.5 mm stone aggregate complete all as specified and as directed. |
| 8 | Supply and fixing of factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic Metre from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed |
| 9 | Supply and fixing of30 mm thick moulded WPC factory made 100% solid door (confoRunning Metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kilogram/Cubic Metre.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw holding capacity complete all as specified and directed. |
| 10 | Supply and fixing of 30 mm thick, factory made flush shutters, BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 11 | Supply and fixing of 35mm thick IIndclass hard wood(Golden Teak)plain fancy, framedpanelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed. |
| 12 | Supply and fixing of35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 13 | Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed. |
| 14 | Taking down Aluminium window shutter size n.exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed. |
| 15 | Taking down Aluminium door shutter size exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make thedoor functional complete all a specified and directed. |
| 16 | Supply and fixing ofmild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 17 | Supply and fixing ofPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheets of any description complete all as specified and directed. |
| 18 | Supply and fixing ofmild steel plain black sheet 0.5 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint and includingdismantling of old sheets of any descriptioncomplete all as specified and directed. |
| 19 | Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and directed. |
| 20 | Supply and fixing ofsteel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240complete all as specified and directed |
| 21 | Material and labourfor preparation of old untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 22 | Material and labourfor preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed |
| 23 | Supply and fixing of100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed. |
| 24 | Supply and fixing of 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed |
| 25 | Supply and fixing of 150 mm long, solid in one piece stainless steel 204 grade,barrel tower bolts of extruded section complete all as specified and directed. |
| 26 | Supply and fixing of 100 mm size solid in one piece stainless steelhandles, in 304 grade and fixed in stainless steel screws complete all as specified and directed |
| 27 | Supply and fixing of stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed. |
| 28 | Supply and fixing of floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed. |
| 29 | Supply and fixing in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed. |
| 30 | Material and labourfor preparation of old untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | Material and labourfor preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 32 | Dismantling of old aluminium anodised partition with frame, (fixed type) with aluminum glazing clip, snap beading and refixing the same in other locations complete all as specified and directed |
| 33 | Hacking out old broken glass (any thickness), size qualityor description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed |
| 34 | Supply and fixing of 12mm thick toughened glass in any size or shape for in door, window etc.including hacking out all as specified and directed. |
| 35 | Supply and fixing in repairs600mm size solid in one piece stainless steel handles, all in 304 grade and fixed in glass doors as directed complete all as specified and directed |
| 36 | Supply and fixing in repairs pivot hinges for glass door/window complete all as specified and as directed. |
| 37 | Supply and fixing of 5 mm thick sheet glass, ordinary quality and glazing with oil putty in squareexc 0.50sqm each pane.complete all as specified and directed |
| 38 | Supply and fixing of 4 mm thick transparent acrylic sheet,fixed with silicon sealent in square/rectangularin doors, windows etc complete all as specified and directed |
| 39 | Supply and fixing of glazing of 5.00 mm thick plain /frosted glass as in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as specified and directed. |
| 40 | Supply and fixing in repair of steel locking handle for window shutterswith screwsetc complete all as specified and directed. |
| 41 | Supply and fixing in repair of double action floor spring of approved brand and manufacture confoRunning Metreing to IS: 6315 hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed. |
| 42 | Supply and fixing of welding in repair length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed. |
| 43 | Supply and fixingin repair of aluminium (extruded section) door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kilogram and fixed with stainless steel screw complete all as specified and directed. |
| 44 | Supply and fixing in repair of 20mm dia stainlesssteel 202 Gde drapery rod withincl brackets, decorative finials at both endscomplete all as specified and directed. |
| 45 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking upor down old tubing complete all as specified and directed. |
| 46 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking upor down old tubing complete all as specified and directed. |
| 47 | Material and labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of foRunning Metre work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick inground floor and paving below or above ground level complete all as specified and directed. |
| 48 | Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection / path surface finished even and smooth without using extra cement including demolition existing PCC, complete all as specified and directed |
| 49 | Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick inground floor and paving below or above ground level complete all as specified and directed. |
| 50 | Material and labour for prepolished chequered cement concrete coloured tiles 30cmx30cmx22-25mm thick, setjointed and pointed in neat cement slurry @ 3.00Kg/Sqm with grey cement and pigment over and including 15mm thick screed bedding layer (1:6) complete all as specified and including dismantling of old tiles complete all as specified and directed |
| 51 | Material and labour for non skidceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6and including dismantling of old tiles complete all as specified and directed |
| 52 | Material and labour for glazed ceramic tiles coloured of size 450x 300 x 7 to 8mm, as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match over and including 15 mm thick rendering in CM 1:4 for receivingtiles as in backing and including dismantling of old tilescomplete all as specified and directed |
| 53 | Material and labour for non-skid / mat finish designed coloured joint free parkingceramic tiles of size not less than 400 mm x 400 mm x 8-9 mm thick in floor, set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of old tiles complete all as specified and directed |
| 54 | Material and labourfor double chargevitrified ceramictiles light shade polished (square / rectangular)of 10mm thick, area of each tile n.exc 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed |
| 55 | Demolitionof stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and as directed by the Engr-in-Charge. |
| 56 | Material and labourfor 20 - 25 mm thick machine cut Kota stone slab as in flooring over and including 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. |
| 57 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 58 | Material and labourfor 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cementwithpigment including demolition of old floor complete all as specified and as directed |
| 59 | Material and labourfor Cutting/grinding and polishing of exterior kota sotne/ terrazzo flooring/granite, etc complete all as specified and directed. |
| 60 | Material and labour18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs, pillars, window-cills, cooking plateform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 61 | Material and labour for brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) andincluding demolition of old brickwork complete all as specified and directed. |
| 62 | Material and labour for rendom rubble stone masonary work straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) andincluding demolition of old stone/brickwork complete all as specified and directed. |
| 63 | Material and labour for brick work with sub class ’B’ bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) andincluding demolition of old brickwork complete all as specified and directed. |
| 64 | Material and labour for rendering 15mm thick in cement mortar 1:4 brick/concrete surfaces of wall, finished even and fair without using extra cement complete all as specified and directed. |
| 65 | Material and labour for rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished evenand smooth without using extra cement complete all as specified and directed. |
| 66 | Material and labour for raised pointing in CM 1:4 to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed. |
| 67 | Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed. |
| 68 | Material and labour for preparation of new plastered wall surfaces and applying two coats of cement base paintover a coat of primer complete all as specified and directed. |
| 69 | Material and labourfortwo coats of oil bound distemperon newly plastered surfaces of wall over a coat of primer including preparation of surfaces complete all as specified and directed. |
| 70 | Material and labour for preparation of old plastered wall surfaces and applying one coat of cement base paintcomplete all as specified and directed. |
| 71 | Material and labourfortwo coats of oil bound distemperon old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 72 | Material and labourfor preparation of wall and applyingwall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed |
| 73 | Supply and fixing of in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed. |
| 74 | Supply and fixing of4 mm thick \"E\" board (classic)of size 600x600 mm false ceiling including & fixing of frame work made of special section MSsheetglavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of Eboard with ceiling section & perimeter of angle 25x25x0.50 mm thickincluding taking down the existing ceilling, complete all as specified and directed. |
| 75 | Supply and fixing ofhollow profilePVC Wall panneling consisting of 5mm thickPVC sheet inclusive of solventand fixing to walls on PVC frame including all fillets as per specifications and drawing including taking down the existing Wall penallingetc complete all as specified and directed. |
| 76 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good existing surface, cutting not exc 10 cm girth in brick walls etc complete all as specified and directed. |
| 77 | Supply and fixing of rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed. |
| 78 | Supply and fixing of rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed. |
| 79 | Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 80 | Supply and fixing in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix ineposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor, complete all as specified and directed. |
| 81 | Supply and fixing in reapair 75 mmPVCfloor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and as directed |
| 82 | Supply and fixing in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed. |
| 83 | Supply and fixing in repair Wash basin, vitreous China (Flat back) of size 550x400mm including fixing and pinning in ends of bracketsincluding brass waste coupling of requisite size and waste pipe complete all as specified. |
| 84 | Supply and fixing in repair pillar taps, brass, with capston heads, fancytype chromium plated, screwed down high pressurewith long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 85 | Supply and fixing in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 86 | Supply and fixing in repair stainless steel grating100 mmdia, complete all as specified. |
| 87 | Material and labour cleaning of water storage tank 500/1000 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in themanner for the following capacitycomplete all as specified and directed. |
| 88 | Supply and fixing in repair 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 89 | Supply and fixing in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed. |
| 90 | Supply and fixing in repair Vitreous china wash down water closet pan (pedestal pattern) (cascade) single piece, white including dual wash flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed. |
| 91 | Supply and fixing in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed. |
| 92 | Supply and fixing in repair half stall china urinals (wall type) complete including plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cementand waste pipe etc complete all as specified and directed. |
| 93 | Supply and fixing in repair of 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed. |
| 94 | Supply and fixing in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed. |
| 95 | Supply and fixing in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 96 | Supply and fixing in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. |
| 97 | Supply and fixing in repair CP brass angle cock 15 mm bore complete all as specified and directed. |
| 98 | Supply and fixing in repair of plastic Water Closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 99 | Supply and fixing in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed . |
| 100 | Supply and fixing in repair PVC wastepipe for urinal flexible typewith 50 mm dia coupler complete all as specified and directed . |
| 101 | Supply and fixing in repair 75 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. |
| 102 | Supply and fixing in repair 110 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. |
| 103 | Supply and fixing in repair UPVC (SWR) bend, 75 mm bore\" complete all as specified. |
| 104 | Supply and fixing in repair UPVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore with oval access door complete all as specified. |
| 105 | Supply and fixing in repair UPVC (SWR) bend, 110 mm bore\" complete all as specified. |
| 106 | Supply and fixing in repair UPVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore with oval access door complete all as specified. : |
| 107 | Supply and laying in repair of 20 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 108 | Supply and laying in repair of 25 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 109 | Supply and laying in repair of 32 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed. |
| 110 | Material and labour for cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding) complete all as specified and directed. |
| 111 | Material and labour for stainless steel (Grade 304) railing/ corner gaurd made of hollow tubes,channels, plates, sheets etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of oldu/s S/S items complete all as specified and directed |
| 112 | Supply and fixing in repair of solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 113 | Material and labour for one coat of oil bound distemper in any tint on wallsincluding preparation of old decorated surfaces of walls (plastered) by brooming down with corewire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed. |
| 114 | Material and labour for two coats of oil bound distemper in any tint on wallsincluding preparation of old decorated surfaces of walls (plastered) by brooming down with corewire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed. |
| 115 | Material and labour for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as speciied. |
| 116 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed. |
| 117 | Supply and fixing in repair12 mm thick prelaminated particle board exerior grade in bottom panel, including rubber gasket, aluminium glazing clipscomplete all as specified and directed. |
| 118 | Supply and fixing in repair heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified |
| 119 | Supply and fixing in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed. |
| 120 | Supply and fixing in repairs PVC (SWR) pipes class-I single socketed in any length with rubber ring joints fixed to wall bore pipe 160 mm including suitable sockets fixed with suitable clamp complete all as specified and directed. |
| 121 | Supply and fixing in repairs PVC (SWR) bend of dia 160 mm complete all as specified and directed. |
| 122 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and directed. |
| 123 | Returning filling in soil including spreadingleveling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed. |
| 124 | Removing excavated material (Soils) n.exc 50 m and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed. |
| 125 | Supply and fixing in repair of mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified and directed. |
| 126 | Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC surface/ concealed conduit as per existing or as directed at site with medium duty 20mm dia or higher size PVC conduit complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code. |
| 127 | One light point, controlled by one way switch, complete all as specified and directed. |
| 128 | One fan point, controlled by one way switch through regulaor, complete all as specified and directed. |
| 129 | One bell point, controlled by bell push switch, complete all as specified and directed. |
| 130 | One three pin 5 Amp socket on same board with other switches, complete all as specified and directed. |
| 131 | One three pin 5 Amp independent socket flush type, complete all as specified and directed. |
| 132 | Allas per ItemNo 126.00 here-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mmPVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing, complete all as specified and directed. |
| 133 | Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction boxof thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code. |
| 134 | One light point,controlled by one way switch, complete all as specified and directed. |
| 135 | One fan point, controlled by one way switch through regulator, complete all as specified and directed. |
| 136 | One bell point, controlled by bell push switch, complete all as specified and directed. |
| 137 | One three pin 5 Amp socket on same board with other switches, complete all as specified and directed. |
| 138 | One three pin 5 Amp, 230 Voltindependent socket flush type, complete all as specified and directed. |
| 139 | Allas per ItemNo 127.00 here-in- before but one three pin 15 Amps switch socket outlet on the independentboardwith 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing, complete all as specified and directed. |
| 140 | Supply and fix in repair plug Top 3 Pin 5A complete all as specified and directed. |
| 141 | Supply and fix in repair plug Top 3 Pin 15A complete all as specified and directed. |
| 142 | Material and labourfor sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC surface/ concealed conduit/ flexible conduit as existing or as directed at site whereever required and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : The wiring to be done as per IE rule and as per colour code. |
| 143 | 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire, complete all as specified and directed. |
| 144 | 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed. |
| 145 | Material and labourfor sub main wiringwith 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : The wiring to be done as per IE rule and as per colour code. |
| 146 | 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed. |
| 147 | 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed. |
| 148 | Supply and fix switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed. |
| 149 | Supply and fix socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed. |
| 150 | Supply and fix3 pinIndependent socket, 230 Volts 5/6 Amps flush typecomplete all as specified and directed. |
| 151 | Supply and fix switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed. |
| 152 | Supply and fix socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed. |
| 153 | Supply and fix bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed. |
| 154 | Supply and fixcalling bell ding dong type AC 230 Volt single pole complete all as specified and directed. |
| 155 | Supply and fix stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size230 volts, 6 Amps 120 watts complete all as specified and directed. |
| 156 | Supply and fix Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed. |
| 157 | Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 Wwith lamp6500/4000 K complete pre-wired all accessories, complete all as specified and directed. |
| 158 | Supply and fix in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 18 Watt and next higher with all accessories and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 159 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 160 | Supply and fix in repair LED tube rod 18 watt made out of polycarbonate acrylic diffuser lumen out put1800 lumens complete all as specified & directed. |
| 161 | Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable DBs complete all as specified and directed. |
| 162 | Supply and fix distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming incl taking down existing unserviceable DBs complete all as specified and directed. |
| 163 | Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 164 | Supply and fix MCB single pole and neutral 240 volt 10 KA 32 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 165 | Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 166 | Supply and fix MCB TPN 415 volt 10 KA 63 Amp \"C\" series conforming to ISI marked complete all as specified and directed. |
| 167 | Material and labour in replacement for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from 4 mm dia earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 15mm dia light grade GI pipe and 15mm dia medium grade GI Pipe for watering complete. Note: (i) If the desired earth resistance less than 05 Ohm is not found within permissible limit shall be redone by contractor at no extra cost.(ii) Cost of GI wire 4 mm dia earth lead and 20mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item. |
| 168 | Material and labour for required for refilling of 5 KG ABC type fire extinguisher of 70-90% MAP complete incl decaning of existing material and refilling with fresh powder with cartridge etc complete incl disposal of existing retrieved material as per CPCB norms complete all as specified and directed. |
| 169 | Description all as per item No 152.00 here in above but 4.5 KG CO2 type, complete all as specified and directed. |
| 170 | Description all as per item No 152.00 here in above but 3.0 KG CO2 type, complete all as specified and directed. |
| 171 | Description all as per item No 152.00 here in above but 2.0 KG CO2 type, complete all as specified and directed. |
| 172 | Description all as per item No 152.00 here in above but 9.0 Ltr water foam type, complete all as specified and directed. |
| 173 | Dismantiling exiting unserviceable 200 LPD to 500 LPD solar water heating system etc and re-fixing its original position after necessary repair/ replacement of unserviceable spares (Evacuated Tube Collector) all as specified and directed.Note : Replacement of spares shall be measured & paid separately under respective items of Sch \"A\". |
| 174 | Material and labour for cleaning of solar water heating system dismantled against item No 157 above and Servicing of solar water heater system byCleaning complete tubes and internally, Anti-scaling Cleaning of all effected parts . Removing any type of chocking of Solar Collector or tube, repairing any type leakage from Gasket,Rubber Washer after Cold Water inletand before hot water outlet of Solar Water Heater with cleaning agent complete all as specified and directed. |
| 175 | Supply and fix in repair PVC water storage tank multilayer of 500 ltrs capacity, cylindrical, vertical with closed top, hoisted and fixed in position with and including 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for 20 mm bore iron pipe and connecting to inlet and outlet pipes complete all as specifed and directed. |
| 176 | Supply installation commissioning and testing of addressable multisensor with a combination of optical and thermal incl base,auto, addressing features as reqd.Detector should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line)for maintaing operationalavailabilityof all elements in the loop in the event of short circuit and to meet style7 requirement, High resistance toelectromagnetic effects in accordance with EFSG agreement EFSG/F/97/005. EMC safety for detector shall be 50V/m shall be EN54/VDS/UL certification. (Detector without inbuilt isolators may be considered with an additional isolator module after 20 devices) Make Bosch FAP-440+T+FAA-440, Simens cerberus 0H921+DB-11, Honeywell morely HM-PTSE+B501, EdwardsSIGA PHD+SIGA. Note The item rates for taking down of allconnected items/accessories are deemedto be included in this rateNote: the item to be executed with existing line |
| 177 | Below False Ceiling, complete all as specifed and directed. |
| 178 | Above False Ceiling, complete all as specifed and directed. |
| 179 | Supply and fixin replacementBLDC CEILING FAN complete with electronic regulator and accessories 230 volts ac single phase,50 HZ,,1200 mm sweep BEE 5 STAR RATINGincl connection upto ceiling rose & taking out old u/s fan, deposited to MES STORE YARD, complete all as specified and directed. |
| 180 | Attending internalElectric complaint in the blocks/lines/offices at MH due to any reason like no supply, any fualt/complaints rectifications with supply & replacement of the following electricstores as mentioned in item No 163 to 189 here in after by trained person complete all as specified and directed.Notes :-(a) This item shall be measured and paid only when store requirement for attending and resolving the complaint is NIL(b) Incase, stores are required to attend and resolve the complaint, this item will not be measured and payment to the contractor shall be done under relevant items from 163 to 189.(c) All T&P and safety tools required to above job are included in the unit rate.(d) Unit rates also include the conveyance and communication faicility is requried the complete the job.(e) The complaint register,complaint slips for each area/zone ,materials issue register for each complaint slips will be maintain by the contractor or rep/supervisor and daily produced all documrnts to the JE/MCM / AGE E/M(f) Materials will provided by the contractor through this contract & neccessary unserviceable or replaced items/unuseditems deposited back to complaint cell. unserviceable/ replaced items will be credited in the Sch of credit items. |
| 181 | Supply and fixin repairDistribution boardSPN 4 Way double door,IP-43 protection for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. incl taking out old u/s DB complete all as specified and directed. |
| 182 | Supply and fixingin repair LED building securitylight fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable and 1.0 Mtr Long GI bracket of suitable size dia as reqd at sitecomplete all as specified including taking out old u/s light fitting complete all as specified and directed. |
| 183 | Supply and fixingin repairwall mounted LED tube light fitting 1x10 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed. |
| 184 | Supply and fix in repair surface mouting PVC gang box of super quality for one switches with two /four holes complete all as specified and directed. |
| 185 | Supply and fix in repair surface mouting PVCgang box of super qualityfor threeswitches withtwo /four holes complete all as specified and directed. |
| 186 | Supply and fixin repair surface mouting PVC gang box of super qualityfor five to seven switches withtwo /four holes complete all as specified and directed. |
| 187 | Supply and fixin repair surface mouting PVC gang box of super quality for eight to twelveswitches withtwo /four holes complete all as specified and directed. |
| 188 | Supply and fixin repair surface mouting stainless steel gang box of dimensions 4\" x 4\" with 2/4 holes complete all as specified and directed. |
| 189 | Supply and fixin repair surface mouting stainless steel gang box of dimensions 7\" x 4\"with 2/4 holes complete all as specified and directed. |
| 190 | Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9 x 6inch complete all as specified and directed. |
| 191 | Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 5 x 5 inch complete all as specified and directed. |
| 192 | Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 8 x 5 inch complete all as specified and directed. |
| 193 | Supply and fix in repair white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9x 11 inch complete all as specified and directed. |
| 194 | Supply and fixin repair Casing & caping 25mm width, ISI Mark complete all as specified and directed. |
| 195 | Supply and fixin repair Casing & caping 20mm width, ISI Mark complete all as specified and directed. |
| 196 | Supply and fix in repairPVC insulated & unshethedcopper multisranded FRLSH cable of size 1.5 sqmm complete all as specified and directed. |
| 197 | Supply and fix in repair PVC insulated & unshethedcopper multisranded FRLS cable of size 2.5 sqmmcomplete all as specified and directed. |
| 198 | Supply and fix in repair PVC insulated & unshethedcopper multisranded FRLS cable of size 4.0 sqmmcomplete all as specified and directed. |
| 199 | Supply and fix in repair PVC insulated & unshethedcopper multisranded FRLS cable of size 6.0 sqmmcomplete all as specified and directed. |
| 200 | Supply and fixswitch single pole one way 6 Amp complete all as specified and directed. |
| 201 | Supply and fix switch single pole one way 16 Amp complete all as specified and directed. |
| 202 | Supply and fix socket outlet 2/3 pin combined 6 Amp 240 volts complete all as specified and directed. |
| 203 | Supply and fixsocket outlet 2/3 pin combined 16 Amp 240 volts complete all as specified and directed. |
| 204 | Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 205 | Supply and fix in replacement heating element of capacity of 3 KW, thread type, suitable for solar water heating system complete all as specified and directed. |
| 206 | Supply and fix in replacement thermostat, suitable for solar water heating system complete all as specified and directed. |
| 207 | Supply and fix in repair solar water heating system evacuated tube any size complete all as specified and directed. |
| 208 | NOTE:- Amount of credit ofRs.89943.50for retrieved materials is mentioned in Schedule of Credit Page No39 & 40 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
