Tender For Periodical Services To Otm/Md Accn At Jasai Mil Stn Under Ge(A) Barmer.; 1 M & L for preparing existing treated surfaces on walls including cornices and applying one coat of white wash on wall by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge. 2 M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices andfill the crack of wall with crack filler paste fill the crack of wall with crack filler paste and applying one coat of cement base paintas camouflage / ordinary pattern complete all as specified & as directed-by-engr-in-charge. Note for above items of external finishing :- the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this. 3 M&L for complete removal of existing treatment of any type/description such as cement base paint,external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilivers/balcony etc with mechanical means/grinder and preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and and fill the crack of wall with crack filler paste and applying two coat of cement base paint as camouflage / ordinary pattern over a coat of primer by complete all as specified & as directed by engr-in-charge. Note for above items of external finishing :- the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this. 4 M&L 2mm thick wall care putty on wall complete all as specified and-as-directed. 5 M&L for complete removal of existing treatment incl preparation of wall surfaces and fill the crack of wall with crack filler paste and applying Two or more coats of 100% Premium acrylic emulsion paint of required shade, , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, including necessary scaffolding arrangement as required at sitecomplete all as specified and-as-directed. 6 M&L for preparation of old surfaces of ceiling (plastered or unplastered) by brooming or steel wire brushing, scrapping down smoke spot moulds, moss efflorescent salts and trading oil greasy spot and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.. 7 M&L for preparation of old plastered surface of Ceiling and fill the crack of ceiling with crack filler pasteand applying one coat of oil emulsion distemper of approved tints complete all as specified and directed by Engineer-in-Charge.. 8 M&L for complete removal of existing treatment incl preparation of ceiling surfaces and fill the crack of ceiling with crack filler paste and applying two coat of oil emulsion distemper of approved tints on ceiling over a coat of interior wall/ceiling primer complete all as specified and directed by Engineer-in-Charge.. 9 M&L for preparation of old plastered surface of wall and fill the crack of wall with crack filler paste and applying one coat of oil emulsion distemper of approved tints complete all as specified and directed by Engineer-in-Charge.. 10 M&L for complete removal of existing treatment incl preparation of wall surfaces and fill the crack of wall with crack filler pasteand applyingtwo coat of oil emulsion distemper of approved tints over a coat of interior wall primer, complete all as specified and directed by Engineer-in-Charge. 11 Preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. 12 M&L preparation of old plasteredsurfaces of walls &writing letters or figures with(Block roman italic or Indian) nexc 30cm high of suitable width as required at site with two coats of flourescent paint complete all as specified and directed by Engineer-in-Charge. 13 M&L for preparation of old decorated steel surfaces of any description, not otherwise described over 10 Cm width & girth and applying one coat of synthetic enamel paint as camouflage / Ordinary pattern complete all as specified and directed by Engineer-in-Charge. 14 Taking down cement plaster on stone masonry/Brick Masonry incl racking out joints, hacking for key scrubbing down with water and direction by Engr- In Charge. 15 M&L for 10 mm rendering in CM 1:4 on fair face of brick workor on concrete surface finished even andfair with water profinfing compound (WPC)complete all as specified and directed.(WPC Measured seprately) 16 M&L for 10 mm rendering in CM 1:6 on fair face of brick workor on concrete surface finished even andsmooth without using extra cement complete all as specified and directed. 17 M&L for 05 mm rendering in CM 1:3 on fair face of ceiling or on concrete surfaces finished even andsmooth without using extra cement complete all as specified and directed. 18 Supply onlyliquidwater proofing compound ( For external new plaster surfaces) 19 M&L for preparation of new plastered surfaces ofexternal walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint over a one coat of of external primer.complete all as specified & as directed by engr-in-charge. 20 M &L for Preparation of newplasteredsurface of walland applying twocoat of oil emulsion distemper of approved tints over a coat of interior wall primer complete all as specified and directed by Engineer-in-Charge.. 21 M&L for preparing new plastered surfaces of ceilings and applying and applying two coat of oil emulsion distemper of approved tints on ceiling over a coat of interior wall/ceiling primer complete all as specified and directed by Engineer-in-Charge.. 22 M&L for repairing of RCCroof projection, chajjas, roof facia, column etc by necessary preparation i.e chipping, scrapping,cutting,chiseling avg thickness 50mm and cleaning exposed reinfocred surfaces of damaged, loosed RCC surfaces and applyingrust remover on (CICO Clean-o rust) in two coats over rusted reinforcement surface of RCC membersand providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/Ltr not less than 50 microns dft with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris. and apply one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5 mm graded stone aggregate and reinforced with welded XPM mesh of weight RCC using coarse sand in patches areas including plastering 10 mm thick with 1:4 cement mortar and apply two coat of cement base paint over a one coat of cement primer complete all as specified and directed.NOTE:Cost of formwork and welded mesh including scoffolding shall be deemed to be included 23 S & F for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . 24 S & F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . 25 S&F in repair 15 mm dia bib tap,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed allasspecified anddirected. 26 S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe orforunion complete all as specified and as directed. 27 S&f in repair 15mm bore pillar tap cast copper alloy fancy typewith capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed all as specified and directed. 28 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. 29 S&F in repairs chromium platedswivel shower roses with or without swivel joints,for fixing with 15mm pipe fixed all as specified 30 S&f in repair600X450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 31 S&F in repair 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 32 S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms). 33 S&Fin repair 15mmborepillar tap of PTMT any colour high prssure screwed for iron pipe and fixed with long shank and cup (concealled type) (min mt 15 mm -110 gms)all as specified 34 S&Fin repair PVC connection 15mm bore length not less than 600mm long with both ends PTMT nuts complete all as specified. 35 Supply and fixingPVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB/Urinal upto floor level complete all as specified and directed. 36 S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain andin flushing pipe complete including P or S trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed . 37 S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directedjoint run and leadfront or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 all as directed and specified. 38 S & F in repair Vitreous china premium/1st quality urinal half stall type, white colour, of size 465x355x265 mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified. 39 S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm diapipe. (Minimum weight 60gms). 40 S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturers instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, Note : The items for counter will be measured and paid separately. 41 S & F in repair Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. 42 S&F stainlesssteel tubing of 20 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets & finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by accepting officer.
