Tender For Constructing Divyang Udyog Bhavan Building At Vadki, Tal: Haveli - Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping. compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed).... (INo25-31 NS, PgNo 179) (STATE SSR) Item Spec: (Bd.F.5 Page No. 300 and B.7, Page. No. 38) 2 ITEM NO: 2 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-50 NS, PgNo 181) (STATE SSR) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No. 38) 3 ITEM NO 3 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo25-70 NS, PgNo 182) (STATE SSR) Item Spec: (Bd F.8 Page No. 302 and B.7, Page No.38) RA NO.: 3 4 ITEM NO. 4 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo26-05 NS, PgNo 184) (STATE SSR) Item Spec: 5 ITEM NO. : 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc complete. (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc c… 6 ITEM NO.: 6 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings. foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending. hooking the bars, binding with wires or tack welding and supporting as required complete..... (INo26-33, PgNo 188) (STATE SSR) Item Spec: (Bd.F.17, Page No. 306) 7 ITEM NO.: 7 Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) (STATE SSR) Item Spec (Bd. G.5 Page No. 315) 8 ITEM NO.: 8 Providing and laying telephone black / Amba White /Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc, complete..... (INo33-68, PgNo 220) (STATE SSR) Item Spec: (As directed by Engineer-In-Charge) 9 ITEM NO.: 9 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete (INo40-02, PgNo 264) ( STATE SSR) Item Spec (Bd U 1 Page No. 537) 10 ITEM NO. 10 Providing and fabricating structural steel work inrolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc complete... (INo23-01, PgNo 173) (STATE SSR) Item Spec. (Bd.C.2 Page No. 275) RA NO.: 8 11 ITEM NO.: 11 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min 550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in th… 12 ITEM NO.: 12 Providing internal cement plaster 12mm thick in single coat in cement mortar 1.4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete... (INo32-04, PgNo 209) (STATE SSR) Item Spec: (Bd. L2 Page No. 368) RA NO.: 9 13 ITEM NO. 13 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (INo32-15, PgNo 210) (STATE SSR) Item Spec: (Bd. L. 10, Page No.370 14 ITEM NO.: 14 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc complete. (INo32-11, PgNo 209) (STATE SSR) Item Spec: (Bd. L. 7 Page No. 369) 15 ITEM NO: 15 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc complete (INo39-09 PgNo 246) (STATE SSR) Item Spec: (Bd-T-34, Page No. 499) 16 ITEM NO.: 16 Providing and fixing in position. (as per IS.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38 ,10*1.02 mm at weight 0.547 kg/Rmt. and window frame 61.85 * 31.75 1.20 mm at weight 0.695 kg/Rmt. Top and side frack section 61.85 x 31.75 * 1.3 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 * 18 * 1.25 * 1 at weight 0.417 kg/Rmt. Inter locking section 40 * 18 * 1.1 | mm at weight 0.469 kg/Rmt. And handle section 40 * 18 * 1.25 mm at weight 0.417 kg/Rmt. and top section 40 * 18 * 1.25 at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting a… 17 ITEM NO 17 Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete. A) Flooring (INo33-40, PgNo 217) (STATE SSR) Item Spec: (Bd.M. 12 Page No. 385) 18 ITEM NO: 18 Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete. b) Skirting (INo33-41. PgNo 217) (STATE SSR) Item Spec: (Bd.M. 12 Page No.385) 19 ITEM NO.: 19 Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete (INo35-21 PgNo 225) (STATE SSR) Item Spec: (As directed by Engineer in charge) 20 ITEM NO 20 Providing and applying interior wall finish luster of Asian/Berger/Nerolac/Dulux Paints or equivalent make on emery paper and wipe clean. Applying Asian/Berger / Nerolac/Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours Applying Asian/Berger/Nerolac/Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian/Berger/Nerolac/Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian/Berger/Nerolac/D… 21 ITEM NO.: 21 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding 1.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface, applying primer coat scaffolding if necessary, and watering the surface for two days etc complete..... (INo35-25, PgNo 225) (STATE SSR) Item Spec: (As directed by Engineer in charge.) 22 ITEM NO: 22 Providing and fixing board displaying information, such as Name of work, Tender cost. Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm. 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1.4.8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec No. As directed by Engineer in Charge (INo6-36, PgNo 60) ( STATE SSR) Item Spec: (MORTH 801) 23 ITEM NO.: 1 MORTOR Compressive Strength (Set of 3 Cubes).... (INo27-VQC, PgNo 585) (STATE SSR) Item Spec: (As per Standard Specification) 24 ITEM NO.: 2 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks)..... (INo13-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) 25 ITEM NO.: 3 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) 26 ITEM NO.: 4 STEEL BAR TESTING Upto 16 mm (Set of 3 Bars)....(INo72-VQC, PgNo 586) (STATE SSR) Item Spec: (As per Standard Specification) 27 GST Charges 18% (On Work Portion) 28 Insurance 0.5% (On Work Portion)
