Tender For Special Repair To Airmen Mess At Ats Belagavi; 1 Removal of concreteand plaster debries to a distance5km and depositing where directed at a level not exeeding 1.5m abovethe described over 10cm width or girth, complete all as specified and directed. 2 Supply only liquid water proofing compound, complete all as specified and directed. 3 Material & Labour for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate)solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:6 complete all as specified 4 Material and labour forPCC 1:4:8 type D-2 using 40 mm gradedstone aggregate as in lean concretein sunken portion all as specified and as directed. 5 Taking down chowkhats or frame not exceeding 1.5 sqm with shuttter( without taking off shutter from the frames), complete all as specified and directed. 6 Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) complete all as specified and directed. 7 Taking down chowkats or frames not exc 1.5 sqm each complete all as specified and directed. 8 Taking down and shuttersexc 1 Sqm but not exc 2 sqm each and refixing in the same opening including necessary screwing of hinges to pressed frameetc , complete all as directed and specified 9 Taking down chowkats or framesexc 1.5 sqm but not exc 4 sqm eachand (without taking of shutters from the frame)and refixing in the same opening includibg necessary screwings of hinges to pressed frame, complete all as specified and directed. 10 Supply & Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length, complete all as specified and directed. 11 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws or welding to steel frame, complete all as specified and directed. 12 Supply & Fix 150 mm long aluminium anodised handle cast type, complete all as specified and directed. 13 Supply & Fix in repairfor 125 mm long aluminium anodised handle cast type, complete all as specified and directed. 14 Supply & Fix in repairfor 150 mm long aluminium anodised handle cast type, complete all as specified and directed. 15 Supply & Fix 150 mm long aluminium anodised barrel tower bolt, complete all as specified and directed. 16 Supply & Fix in repair for 150 mm long aluminium anodised barrel tower bolt , complete all as specified and directed. 17 Supply & Fix in repair for 125 mm long aluminium anodised barrel tower bolt, complete all as specified and directed. 18 Supply & Fix 100 mm long butt hinges medium weight cold rolled fixed to door frame, complete all as specified and directed. 19 Supply & Fix in repair for 100 mm long butt hinges medium weight cold rolled fixed to door frame, complete all as specified and directed. 20 Supply & Fix in repair for 125 mm long butt hinges medium weight cold rolled fixed to door frame, complete all as specified and directed. 21 Supply and fixed in repairs 25mm dia decorative type stainless steel curtain rails with decorative type fixing end brackets, middle brackets , stops, rollers etc. complete in all respect as specified & directed. 22 Supply and fixedin repairs tubular brass chromium plated Towel rail 20mm dia D type 60cm long between flanges complete in all respect as specified & directed. 23 Supply & Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified & directed. 24 Supply & Fix aluminiumwindows and ventiators shutters/ Al louverd Strip powder coated (minimum thikness of powder coating 50 micron), side/top hung type without sash bars, aluminium sections of not less than 60mm width and 1.5 mm thickincluding necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminum fittings such as peg stays 150mm long ( 1no per window), hinges75mm long (2/3 nos) , suitable handle (1 NO) complete all as specified and directed 25 Supply and fixing tubular trussessSHSincluding special shadep ERW or induction butt welded tubes conforming toI.S.1161-1979 grade St-240 in main and cross beams, hip and jack rafters; purlinsfixed with other connecting tubular trussess etc of Fe 290 (Gde E-165) complete all as specified and directed. 26 Supply & Fixprepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed. 27 Material and labour in padding of 40 mm thick in cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in floor all as specified and directed. 28 Material & Labour for 25mm thick cement concrete , type B0 1:2:4 using12.5mm stone agg as in levelling course to receive top finish layer complete all as specified and directed. 29 Material & Labour for Non-skid Ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over cement screed 15 mm thick 1:6 complete all as specified and directed. 30 Material & Labour for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4 complete all as specified and directed. 31 Material & Labour for Granite (of any type) tiles 20mm thick over and including 20mm thik screed bed in CM 1:6 and jointed with grey cement slurry and pointed with white cementwith admixture of pigment tomatch the shade of granite stone including grinding and polishingcomplete all as specified and as directed 32 Material and labour for machine cut kota stone slab flooring 20-22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish over and including 20mm screed bed in cement mortar 1:4, all as specified and directed. 33 Material & Labour for Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing with neat cement slurry @ 3Kg of cement per Sq meterincluding removal of old cement concrete tiles and water proofing membrane.then After avg 50 mm thick PCC 1:2:4, type B1 (Using 20 mm graded stone agg) as in floors and pavings padding concrete/levelling course complete finished even and smooth without using extra cement.then after 10mm thk rendering in cm 1:3 mixed with water proofing compound as per manufacturer instruction on concrete surface and making the surface even and smooth as in required slope for draining out the rain water. then after Cleaning and preparation of the surface to receive Fosroc Proofex ORGor its equivalent in approved make water proofing system shall be a sound base, any crack shall be treated with cementious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar by proper grooving arrangement all as directed.then after Providing and laying / fixing TPO membrane of non-flammable waterproofing of roof which shall be a 1.5mm thick loose laid membrane using Fosroc ORG membrane or its equivalent in approved make layers are overlapped to achieve a minimum weld of 110mm, Hot air welding can be either hand applied or by means of automatic machines and the rolls either end are overlapped with layers of non-woven geotextile fiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make and the concrete substructure, the termination of Fosroc Proofex ORG or its equivalent in approved make by aluminium strip anchoring.Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system. 34 Material & Labour for Granite (of any type) tiles 20mm thick over and including 20mm thikand jointed with grey cement slurry and pointed with white cementwith admixture of pigment tomatch the shade of granite stone including grinding and polishingcomplete all as specified and as directed 35 Material and labour for preparation of floor and wall surfaces, treatment and sealing of all joints, corners, junctions of pipes and Masonry with polymer mixed slurryand asdirected. 36 Material and labour for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer ARMOUR -CRETE of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or POLYCRYL of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours and as directed 37 Material & Labour for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer ARMOUR CRETE of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour-crete : cement : silica sand) or POLYCRYL of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions.This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and as directed. 38 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) of any thickness and in any positionand removing serviceable tiles to store and rubbish off the premises complete in all respect as specified & directed. 39 Taking down cement plaster including racking out joint hacking for key scrubbing down with water etc. complete all as specified and directed. 40 Material and labour for rendering 10 mm thick cement plaster in CM 1:6 for wall finished even & smooth complete all as specified and directed. 41 Material and labour for rendering 15 mm thick cement plaster in CM 1:4 as in external wall & sunken floor finished even & smooth complete all all as specified and directed. 42 Material and labour for 5 mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth all as specified and directed. 43 M&L for preparation oftreated surfaces and applying two coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed. 44 Material & Labour for preparing New decorated ceilings surfaces and applying two coat of white wash complete all as specified and as directed. 45 Material & Labour for preparing New decorated wall surfaces andpriming plastere and other surface with alkali resistant primimg paint applying two coat of oil bound distemper complete all as specified and as directed. 46 Material & Labour for Complete removal of existing treatment of old decorated wall surfaceand applying two coats of oil bound distemper over 2mm thicklayer of puttyfinished smooth surfaces including priming coatall as specified and directed . 47 Material and labour for preparation of old plastered surfaces with two coats of white wash as on ceiling complete all as specified and directed. 48 Supply and fix figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading all as specified 49 Supply and fix in repairs sheet plain glass4 mm thick, ordinary quality, in squaresnot exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified 50 Material & Labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. 51 Material & Labour for one coats of synthetic enamel paint on old wooden surfaces of any description over 10cm width or girth including necessary preparation of surface all as specified. 52 Taking up or down 32 mm bore steel/PVC tubing and connections, including cleaning for refixing or removal to store and connection all as specified and directed. 53 Taking up or down 25 mm bore steel/PVC tubing and connections, including cleaning for refixing or removal to store and connection all as specified and directed. 54 Taking up or down 20 mm bore steel/PVC tubing and connections, including cleaning for refixing or removal to store and connection all as specified and directed. 55 Supplying and laying of 20mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete in all respect as specified and directed. 56 Supplying and laying of 25mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete in all respect as specified and directed. 57 Supplying and laying of 32mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete in all respect as specified and directed. 58 Supply and fix in repairs vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, excluding flushing cistern and flush pipe) including Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including P or S PVC trap connected to PVC/CI pipes complete in all respect as specified and directed. 59 Supply & Fixin repairs vitreous china wash hand basin, white in colour,(counter type oval shaped) of size 560X470X190mmincluding cutting of granite top and fixing complete in all respect as specified & directed. 60 Supply & fix in repairs Virtreous china urinal half stall type with grating and union for discharge pipe, fixing plug and waste pipe bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar all as specified and directed 61 Supply & fix in repairs CP Urinal spreader for fixing with 15mm dia pipe complete all as specified and as directed 62 Supply and fix in repairs vitreous china squatting pan Orissa pattern fixed in repair size 580 x 440 mm white with integral foot rest (excluding flushing cistern) incl taking down old water closet and provn of lime concrete bedding etc complete 63 Supply and fixed in repair 10 liter PVCdual flush valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, and handle/push type, including 32mm bore dia PVC long/short flusing pipe for IWC/EWC andbrackets complete in all respect as specified & directed. 64 Supply and fix For Mirrorany Sizebevelled edge mirror of selected quality glass, mounted on 12mm thickPVC Board fixed to PVC sleeveswith chromimum platesd brass screws and cup washer over screw head complete in all respect as specified & directed. 65 Supply & Fix in repairs Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.00 metre long SS braidedhose/connection pipe including ABS wall hook connections and fixed in position complete as specified and directed. 66 Supply and fix in repair 15mm bore dia fancy wash basin long body pillar tap, cast copper alloy, chromium plated including necessary connecting pipe, screwed down, screwed for water pipe complete in all respect as specified & directed. 67 Supply & Fix in repairs two way chromium plated bib cock with wall flange screwed for iron pipe/CPVC/UPVC or for brass ferrule and fixed complete all as specified. 68 Supply and fixin repairs 15mm bib taps fancy type chromium plated round handle, screwed down, screwed for iron pipe/CPVC/UPVC and fixed complete all as specified and directed. 69 Supply and fix in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed complete all as specified and directed. 70 Supply and fix in repairs 15mm chromium platedangular stop cockfancy type,screwed down, high pressure, with long screwed shanks and fly nuts screwed for upvc/cpvc pipe and fixed complete all as specified and directed. 71 Supply & fixPVC connection 15 mm dia with PTMT nut of length450 mm all as specified anddirected. 72 Supply & fixPVC connection 15 mm dia with PTMT nut of length600 mm all as specified and directed. 73 Supply and fix in repairs Fancy type square shape of minimum size 100mmX100mm swivel shower of cast stainless steel, including CP finish shower rod (long) and cup washer/wall flange for fixing with 15mm bore dia pipe/fittings complete in all respect as specified & directed. 74 Supply & Fix in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in floor with necessary clamping complete all as specified and directed. 75 Supply & Fix in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in floor with necessary clamping where required 76 Supply & Fix in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary clamping complete all as specified and directed. 77 Supply & Fix in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary clamping where required 78 Supply and fix in repairs PVC (SWR)bends for 75 mm bore pipewith access door complete all as specified 79 Supply and fix in repairs PVC (SWR)bends for 110 mm bore pipewith access door complete all as specified and directed. 80 Supply & Fix in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 81 Supply and fix in repairs PVC SWR 75 mm dia branch pipe, singe (Single Y) equal or unequal provided with access door 82 Supply and fix in repairs PVC bends for 75 mm bore pipe complete all as specified and directed. 83 Supply and fix in repairs PVC SWR 110 mm dia branch pipe, Double (double Y) equal or unequal provided with access door complete all as specified and directed. 84 Supply and fix in repairs PVC bends for 110 mm bore pipe complete all as specified and directed. 85 S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. 86 Supply and fix PVC (SWR) vent cowl 110 mm dia complete all as specified & directed. 87 Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified & directed. 88 Supply and fix PVC (SWR) junction single, (Single T) equal or unequal with access door for 75 mm bore pipe complete all as specified & directed. 89 Supply and fix PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe complete all as specified & directed. 90 Supply & Fixin repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) Complete all as specified and directed. 91 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete in all respect as specified & directed. 92 Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level),complete in all respect as specified & directed. 93 Dismantling and breaking up drain pipes (salt glazed ware, AC, reinforced concrete, PVC or Cast iron) set in cement mortar of size 100mm/75mmfixed over wall or in floor including clamps etc., complete in all respect as specified & directed. 94 Dismantling of brickwork, concrete masony workor stone/boulder masonry work, built in cement mortar including allquoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete in all respect as specified & directed. 95 Dismantlimggalvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick sheets in roof coverings invld ridges, complete all as specified and directed. 96 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. 97 Taking down carefully unserviceable main switches/DBs/Metal socket off size including MCBs from their position and removing materials from site all as specified and as directed. 98 Material & Labour for Point wiring with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVCconcealedconduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULARMETAL FLUSHBOX, modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly for One light point controlled by one, one way switch 5 Ampcomplete all as specified and directed. 99 Material & Labour for Point wiring with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVCconcealedconduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULARMETAL FLUSHBOX, modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly for one light point controlled socket point on indpendent boardcomplete all as specified and directed. 100 Material & Labour for Point wiring with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVCconcealedconduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULARMETAL FLUSHBOX, modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly for socket point on the same board with other switches complete all as specified and directed. 101 Material & Labour for Point wiring with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 4 Sq mm single core in and including new non-metallic rigid PVCconcealedconduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULARMETAL FLUSHBOX, modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, including provision of 4 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly for one 3 pin socket outlet 15 Amps independent board, complete all as specified and directed. 102 Supply & Fix switch Modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as perCat Part No - 800100 of make -Indoaisian ELVIRAorCat Part No - ACWSXXW101 of make - Havells CRABTREE(Signia) or equivalent in other make, complete all as specified and as directed. 103 Supply & Fix switch Modular type single pole 16 Amps One Way Switch with indicator AC 230V, 50HZ supply all as perCat Part No -800105 of make - Indoaisian ELVIRA orCat Part No -ACWSXIW161 of make - Havells CRABTREE(Signia) or equivalent in other make, complete all as specified and as directed. 104 Supply & Fix Modular type socket5AAC 230V, 50HZ complete all as per Cat Part No - 802800 of make - Indoaisian ELVIRA orCat Part No - ACWKPXW063 of make - Havells CRABTREE(Signia) or equivalent in other make, complete all as specified and as directed. 105 Supply & Fix Modular type SOCKET combine 6A/16A multi purpose AC 230CV, 50Hz all as perCat Part No -800122 of make - Indoaisian ELVIRA orCat Part No - ACWKCXW163 of make - Havells CRABTREE(Signia) or equivalent in other make, complete all as specified and as directed. 106 Material & Labour for complete for ceiling rose surface backelitethree terminal 240 volts complete all as specified & directed. 107 Supply & Fix LED lights fitting 1x 20W, 220V, wall mountedLED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cablefrom ceiling rose complete all as per Cat Part No - LUMILINE+BS20WLED830SPCSSIND of make - Havell or equivalent in other make, complete all as specified and as directed. 108 Supply & FixModularFan step regulator, 120W - 2 module complete all as perCat Part No - 800139 of make- Indoaisian ELVIRAor Cat Part No - ACWRFHW008 of make - Havells CRABTREE(Signia) or equivalent in other make, complete all as specified and as directed. 109 Supply & Fix LED lights fitting 1x 10W, 220V, wall mountedLED batten with Aluminum Housing & integrated electronic driver all as per Cat Part No - LUMILINE+BS10WLED865SPCSS of make - Havells (or equivalent in other make) including connecting up with 0.5Sqmm three core flexible copper conductor cablefrom ceiling rose complete all as specified and as directed. 110 Supply & Fix ENDURA SUN DOWN energy saving and environmental friendly long life LED street light made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and impact resistance of IK08 LED street lightof 35 Watt all as per Cat Part No - ENDURASUNDOWNSL35WLED765PASYBOPC of make - Havells (or equivalent other makes) with sutable sizebracket made to shape of 40 mm dia GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete all as specified and directed. 111 Material & Labour for sheet metal enclosure Double Door factory made distribution board 240 volts SPN 12 way, 200 Amps rated bus bar, complete all as specified and as directed. 112 Material & Labour for for taking down ceilng fan / Exhaust fan, dismantling blades, Painting of ceilingfans complete in situ with synthetic enamel paint by sprayingincluding filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of 0.5 Sqmm 3 core cable from ceiling rose to connector of fan, complete all as specified and as directed. 113 Material & Labour for exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the wall as round shape for exhasut the air, all as specified and directed, complete all as specified and as directed. 114 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed. 115 Material & Labour for Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp including taking out the unserviceable plug and socket, complete all as specified and as directed. 116 Material & Labour for in replacement sub main wiring in PVCconcealedconduitmin 25 mm diawith 2 single core 06 sqmm frlshmulti-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 06 sqmm copper conductor cable connected to common earth dolly complete and including PVCconcealedconduitall as specified and as directed.Note -Two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM. 117 Material & Labour for sheet metal enclosure Double Door factory made distribution board 240 volts SPN 4 way, 200 Amps rated bus bar complete all as specified and as directed. 118 Material & Labour for sheet metal enclosure Double Door factory made distribution board 240 volts SPN 8 way, 200 Amps rated bus bar complete all as specified and as directed. 119 Material & Labour for sheet metal enclosure Double Door factory made distribution Triple pole and neutral200Amps rated bus bar,415VOLT,8WAY complete all as specified and as directed. 120 Material & Labour for MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed. 121 Material & Labour for MCB SP 06 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specifiedand directed. 122 Material & Labour for 415V 10KA B curve miniature circuit breaker (MCB) 63 amp of TPNcurrent carrying capacity in the DB complete with connection testing and commissioning, complete all as specifiedand directed. 123 Material & Labour fo Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre depth below normal ground level) with top edge of plate at a depth not less than 1.5 mtr below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 04 mm dia with and including bolts, nuts, check nuts and washers of galvanised iron or steel and riveted to earth plate and one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 15 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and includingflatiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 03 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including neessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m, material and labour complete all as specified and as directed.(Notes (i) The rate quoted shall be deemed to include for all the above provisions. (ii) PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting maner.
