}

Tender For Provision Of Temporary Shops Near Open Air Theatre And In Front Of Hostel No 10 , At Nit Kurukshetra., kurukshetra-Haryana

National Institute Of Technology has published Tender For Provision Of Temporary Shops Near Open Air Theatre And In Front Of Hostel No 10 , At Nit Kurukshetra.. Submission Date for this Tender is 24-07-2025. Building Work Tenders in kurukshetra Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

49982798
Tender For Provision Of Temporary Shops Near Open Air Theatre And In Front Of Hostel No 10 , At Nit Kurukshetra.
Tender
Indian
Haryana
Kurukshetra
24-07-2025

Tender Documents

Tender Details

Tender For Provision Of Temporary Shops Near Open Air Theatre And In Front Of Hostel No 10 , At Nit Kurukshetra.; 1 STEEL WORK 2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 3 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete 4 WOOD AND PVC WORK 5 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading 6 SANITARY INSTALLATIONS 7 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 8 Flexible pipe 9 40 mm dia 10 ROOFING 11 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12 Single tee without door 13 110x110x110 mm 14 Bend 87.5° 15 110 mm bend 16 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 17 WATER SUPPLY 18 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 19 15 mm dia nominal bore 20 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 21 15 mm dia nominal bore 22 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 23 15 mm nominal bore 24 NON SCHEDULE ITEM 25 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion and including trenching and refilling etc. (i) Single socketed pipes. 26 110 mm diameter 27 Providing and fixing multipurpose cement bonded wood particle board manufactured as per IS: 14276, to frame, backing or studding with suitable cement bonded board screws etc. complete (Frames, backing or studding to be paid separately): 28 12 mm thick 29 Steel work in built up tubular/single section (round, square or rectangular hollow tubes, angles & flats etc.) trusses/ frames/doors/windows etc., including cutting, hoisting, fixing in positionall necessary fittings hinges, sliding/tower bolts, pivots etcand applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 30 Hot finished welded type tubes & built up sections in angles, tees, flats and channels. 31 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows with metal sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size)(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).: 32 Float glass panes 33 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Key Value

Document Fees
INR 500 /-
EMD
INR 36500.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail