Tender For Repairing Of Type Iv Quarter At Mus In Car Nicobar.; 1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubish to the dumping ground, all complete as per direction of Engineer-in-charge with cement morter 1:4 (1 cement, 4 River sand) and labour charges, GST, minor tools etc. complete. 2 Taking out existing wooden door shutter, repair by cutting, painting etc. and re-fixing of repaired door shutters to existing door frames, including replacementof hinges with screws etc. as required, all complete as per the direction of EIC and labour charges, labour cess, minor tools and GST etc. complete. 3 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 4 Distempering with dry distemper of approved brand and manufacture (one coat) and of required shade on old work, over and including priming coat of whiting to give an even shade over old cement surface, preparation of surface including cleaning, scraping of exiting painted surface, cost of distemper, brushes, transportation charges, scaffolding arrangements, all labour charges, minor tools etc 5 Painting two coat with antifungal paint of approved brand and manufacture on old wall surface to give an even shade including cost of other material, transportation charges, labour charges scaffolding arrangements, cost of puty, minor tools, GST, labour cess etc., complete. 6 Providing and fixing white vitreous china pedestal type water closet (Eropean type W.C pan) with seat and lid, CP brass hinges and rubber buffers, 10 litre low low level PVC flushing cistern with fittings C.I , MS brackets, 40 mm diameter flush pipe with fittings and clamps, overflow arragement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors whereverrequired, transportation charges of materials to work site, all labour charges, minor tools, Labour welfare cess, GST etc, complete. 7 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade. Including cost of ready mixed paint, brushes, transportation charges, scaffolding arrangements, all labour charges, minor tools, labour welfare cess, GST etc. complete. Old wood work (One coat) 8 Providing and fixing solid PVC panelled door of ISI mark of approved brand with 3mm thick and frame provided with 5mm thick PVC, including cost of all materials, all fittings, all labour charges,minor tools, transportation charges etc. complete. 9 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutteirng - -including cost of cement, stone aggregates, pulvarised sand, all labour charges, cost of minor tools, transportation charges, GST, labour welfare cess etc complete. complete.All work upto plinth level. 1:2:4 (1 cement, 2 Mainland river sand and 4 graded stone aggregate 40mm nominal size) 10 Providing and fixing 1stquality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with gray cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11 Providing and laying vitrified tiles 300 mm X 300 mm (thickness to be specified by the manufacturer of 1st quantity conforming to IS: 15622, of approved make in colour such as white, ivory, grey fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement, 4 pulverized sand ) including cost of cement, cost of pulverized sand pointing joint with white cement, and matching to work site, transportation charges of all materials to work site, all labour charges minor tools, GST, labour welfare cess etc complete 12 Providing and fixing white vitreous china Wash basin with C.I bracket, 15 mm C.P Bras pillar taps, 32 mm C.P brass waste pipe of standard +B60 pattern, hope pipe of 40 mm dia, including painting of fitting and brackets, cutting and making good the wall where required. Flat Back, including transportation charges of materials to work site, all labour charges, minor tools, Labour welfare. 13 Providing and fixing mirror of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, including transportation, all labour charges, minor tools, Labour welfare cess, GST etc, complete. Rectangular shape 453 x 357 mm. 14 Providing and fixing syntax tank 1000 lit capacity including cost of syntax tank fitting charges, syntex tank, including transportation, all labour charges, minor tools, Labour welfare cess, GST etc, complete. 15 Providing and laying G.I pipe complete with G.I fitting and clamps including cutting and making good the wall etc. including cost of all materials, labour charges, labour cess, transportation of all material, minor tools, GST etc. complete. 16 15 mm dia G.I pipe 17 20 mm dia G.I pipe 18 Providing and fixing gun metal valve with C.I wheel of approved quality (screwed end),including cost of material , labour charges, minor tools, GST, etc., complete. 19 15 mm dia Gate valve 20 20mm dia Gate Valve 21 Providing and fixing brass bib cock of approved quality, including Labour welfare cess, GST etc, complete.20 mm nominal dia. 22 Providing and fixing of approved quality of GI UNION SOCKET of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete. 15 to 40mm Nominal Bore 23 Providing and fixing of approved quality of GI REDUCER of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete.15 to 40mm Nominal Bore. 24 Providing and fixing of approved quality of GI bend of following sizes including cutting and threading, labour charges, minor tools, Labour welfare cess, GST etc, complete.15 to 40 mm nominal bore 25 Supply of manpower for Cleaning of floor and attending various miscellaneous works, including cost of all labour charges, cost of minor tools, labour cess and GST etc., 26 Un skilled Mazdoor
