|
| 1 | Removal of existing Heavy jungle and clearing site for construction work and clearing area as directed by officers |
| 2 | Removal of existing R.C.C structures with suitable types of machinery and labours and dumping the waste at sides as directed by the departmental officers |
| 3 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 4 | Supplying and filling the basement with Good Earth filling in layers of not more than 15cmthick well rammed watered and compacted - etc., complete complying with standard specification. |
| 5 | Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying withstandered specfications and as directed by the departmental officers.(Upto 90 Cm) |
| 6 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 7 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 8 | Sub Structure Foundation and Basement |
| 9 | Super Structure GF upto 4.500 m |
| 10 | Super Structure First Floor |
| 11 | Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. |
| 12 | Foundation and Basement upto 1.50 m Depth |
| 13 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 14 | Providing and laying in position, Brick Work in Cement Mortar 1:5 Mix (one cement, Five sand) using new best Wire Cut Bricks for Heritage Worksof size 9\" x 4 \"x 3\" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. (For 10 m³). |
| 15 | Super Structure GF upto 4.500 m |
| 16 | Super Structure First Floor |
| 17 | Providing and laying in position, Brick Work in Cement Mortar 1:5 Mix (one cement, Five sand) using Second Class Ground Moulded Chamber Burnt Bricks of size 9\" x 4½\" x 3\" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. |
| 18 | Super Structure GF upto 4.500 m |
| 19 | Super Structure First Floor |
| 20 | Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Crushed Stone Sand (M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification |
| 21 | Plastering with cement mortar 1:5 (One cement, and five sand) 12mm thick including curing, cost and conveyance of all materials complying with standard specification……10m² |
| 22 | Plastering with Cement Mortar 1:3 (One Cement and Three PlasteringSand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 23 | Water repellent paint 3 coats over the Exposed brick work and exposed brick tile area Including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 m² |
| 24 | Supplying and laying in flooringwith fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4\" X 2\" in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers |
| 25 | Supplying and Laying of Ø25mm Perforated PVC Pipe onCircular Pedestals |
| 26 | Supplying and filling HBGS Jelly 20mm size for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification. |
| 27 | Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seigniorage charges, cost of transportation, loading,unloading, stacking and inclusive of all taxes etc., complete.[HC-W0026 / PD-1609 SOR VOL II 2024-2025] |
| 28 | Planting of Dracaena Victoria Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.[HC-W0063 / PD-1651 SOR VOL II 2024-2025] |
| 29 | Planting of Heliconium foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in- charge.[HC-W0073 / PD-1661 SOR VOL II 2024-2025] |
| 30 | Manufacturing, Supplying and Fixing of Vertical Pipe Members Using Mild Steel (MS) 100mm Circular Hollow Steel Pipe Sections With 4.5mm thick with Two Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 31 | Manufacturing, Supplying and Fixing of Horizontal Pipe Members Using Mild Steel (MS)40mm Circular Hollow Steel Pipe Sections With 3.2mm thick with Two Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 32 | Manufacturing, Supplying and Fixing of Vertical and Horizontal Pipe Members Using Mild Steel (MS) 50X50X4mm (SHS) Square Hollow Sections With 4.5mm thick with Two Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 33 | Manufacturing, Supplying and Fixing of Vertical and Horizontal Pipe Members Using Mild Steel (MS) Ø50mm (CHS) Circular Hollow Sections With 4mm thick, with Two Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 34 | Manufacturing, Supplying and Fixing of MS Circular Base Plates of (Diameter Veries) size 350mm Width 16mm thick withTwo Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 35 | Manufacturing, Supplying and Fixing of MS Rectangular Base Plates of size 350mmx350mmx16mm withTwo Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 36 | Manufacturing, Supplying and Fixing of MS Rectangular Base Plates of size 200mmx200mmx12mm withTwo Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 37 | Manufacturing, Supplying and Fixing of MS Rectangular Base Plates of size 100mmx100mmx10mm withTwo Coat Primer and Grey Enamel Paint Finish. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, Painting, conveyance, electrical charges, etc. complete |
| 38 | Manufacturing, Supplying and Fixing of (˩) Lug Rods Ø16mm & 600mm depth @ 200mm C/C- 2.025m (L). The rate is inclusive of the charges for cutting, bending, welding, conveyance, electrical charges, etc. complete |
| 39 | Manufacturing, Supplying and Fixing of M16 Anger Bolts width 600mm embeded length fixing on the Base Plates. |
| 40 | Supplying and Fixing of M12 Bolts width 300mm embeded length fixing on the Base Plates. |
| 41 | MS Door Hinges |
| 42 | MS Door Handles |
| 43 | MS Door Locks |
| 44 | Supplying, Placing and tensioning Galvanised Iron Chain link -50mmx50mm x10 Gaugeover the existing M.S. angle postat height of 1.5mtr with top and bottomto be fixed with a M.S. Flat of size 25x3mm Horizontal on both sides and alsoin the postincluding the provision of holes in M.S. flats and fixing GI bolt and nuts ( 25 x 3mm) with washers etc., complete. The rate is including cost of all materials , labour charges but excluding cost of M.S angle post and concrete pedestal. |
| 45 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point SD 261 |
| 46 | Light Points |
| 47 | 8W Bollard Light M - 2704 (For Outdoor) |
| 48 | Single Pole 40A, 10KAMCB (M - 1762) |
| 49 | 25 Amps 30 MA DP RCCB(M - 1804) |
| 50 | Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection (SD - 127) |
| 51 | 32 Amps Porcelain Fuse Unit (500V)(M - 1392) |
| 52 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32 A 4 P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. SD 529 |
| 53 | External Water Supply Arrangements using PVC pipes and PVC specials -Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 54 | Below Ground Level (50mm dia) |
| 55 | Below Ground Level (25mm dia) |
| 56 | Below Ground Level (20mm dia) |
| 57 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements |
| 58 | 50mm PVC Plain Elbow SOR - M-0891 |
| 59 | 50mm PVC Coupler SOR - M-0885 |
| 60 | 50mm PVC Bend SOR - M-0897 |
| 61 | 25mm PVC Plain Elbow SOR - M-0888 |
| 62 | 25mm PVC Bend SOR - M-0894 |
| 63 | 25mm PVC Coupler SOR - M-0882 |
| 64 | 25mm PVC Tee SOR - M-0900 |
| 65 | 25mm x 20mm Reducer Elbow SOR - M-0921 |
| 66 | 25mm x 20mm Reducer Tee SOR - M-0916 |
| 67 | 20mm CPVC Plain Nipple |
| 68 | 20mm PVC Plain Elbow SOR - M-0887 |
| 69 | 20mm x 15mm Readucer Elbow SOR - M-0920 |
| 70 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 71 | Gate Valve (50mm dia) |
| 72 | Gate Valve (25mm dia) |
| 73 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 74 | CP Screw Down Tap |
| 75 | Supply, delivery and fixing of Porta Cabin of size 9.25m x 2.75m x 2.60m supporting column at corners is made out of SHS 70mm pipe welded between The top and Base frames. The structural base frame work is made out of 2mm thick. The roof is made out of 1.6mm thick HRCA sheet formed as profile and welded with the structural frame work. The roof is provided with 3~5 deg. Slope to enable rain water. Outer wall made up of corrugated Ms 1.6 thick mm CR sheet welded (MIG WELDING) to the frame. The Internal wall and roof insulation made Board Paneling.The flooring is made out of 18mm thick Cement Board to confirm IS 710 fixed existing frame work using suitable fasteners and Vinyl Flooring. Door is made of MS Standard Door -1 No, Flush Door-1 No. Electrical arrangements, 5amps Switch and Socket -8 No’s, Light - inside Tube Light-8 No\"s, 15amps AC Point-1 No, Bulk head fittings 1No, with necessary electrical wiring and DB- 1 No. including all cost and conveyance at site etc., Complete. |
| 76 | Entrance Lobby Ticket Counter |
