Tender For Annual Repair Work In Government General Hospital Campus, Alwar - P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.500 litres capacity. 3 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231 4 P & F water closet Seat Covers with brass hinges complete : (IS : 2548 Marked)Solid PVC (ISI marked) grade-I White for EWC. 5 P& F waste Pipe with all fitting P.V.C with C.Pnut 32 mm 6 P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Oval shape 450x350 mm 7 P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). 8 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 9 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 510 mm x 400 mm 10 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore 11 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. 12 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete :Brass wt. Not less than 300 gm,15mm. 13 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 14 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make:C.P. Brass 15mm nominal bore. 15 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.110 mm dia 16 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:110 mm dia Bend 87.5 17 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 18 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.25mm dia nominal boreB Class 19 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.15mm dia nominal bore B Class 20 Health focet (Premium heavy Quality) as approved by Engineer-in-Charge 21 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shadesglazed tiles confirming to code IS : 15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 22 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to code IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blueand other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the whitecement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 23 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 24 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M15 grade Nominal Mix1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 25 P & F 15 mm. Dia Connection Pipe of approved quality/make (-do-) 450mm. 26 P & F Sand –cast Floor Trap (Nahni) of (IS:1729 mark) of approved quality/make with socket down or hinged gratingincluding cutting and making good the floor. 27 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation,20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring ,earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.-do- size 450 x 450mm depth upto 0.5 M Cement cover withframeDeduct for using brick work 230 mm thick in place of 300 mm thick stone masonry 28 P & F Acrylic Toilet accessories set consisting of Towel rail, shelf, towel ring, soap dish, paste & brush holder & twin pegof approved quality/make. 29 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. bywelding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete 30 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts& screw etc. 31 Repair of door, window shutters including cost of material and labour for change of damaged : 32 (i) Shuttering Ply - 9mm thick (Commercial) Sqm. 598.00 33 (ii) Wire Gauge 14 mesh x 24 gauge Sqm. 34 (c) Aldrop of mild Steel 35 (i) 12 long x12mm dia 36 (d) Stopper of Aluminium with 37 (i) Single Rubber Gutka Each 33.00 38 (ii) Double Rubber Gutka 39 (f) Steel Hinges 40 (iii) For Stone Chowkhat ,4size 41 (g) Mild Steel Tower Bolt 6 long 42 (i) Steel Handle 6 size 43 Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm 44 Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100x 75mm 45 Providing and fixing fully panelled/partly panelled/ double leaf shutter frames for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - A and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete :35 mm thick Ivory coast wood grade I 46 SS wire gauge 14 mesh x 24 gauge 47 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :35 mm thick .Decorative teak veneer both side 48 Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) 49 Providing and fixing IS : 3564 marked aluminium extrudedsection body tubular type universal hydraulic door closer withdouble speed adjustment with necessary accessories andscrews etc. complete. 50 Structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting(height upto 10 m) , fixing in position and applying a primingcoat of approved steel primer all complete: 51 Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coatedsuperior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge 52 Extra for additional shutter in pipe section windows with wire gauge 14 mesh x 24 gauge 53 Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) including brackets fixed with C.P. brass screws and rawl plugs, etc., wherever necessary complete two side central allfittings 54 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work 55 Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter &35x12mm on outer frame for making good the wall joint including heavy brass S.S.fittings Handle200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos.,Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos.,SS Hanger Rod 20mm dia) complete as per drawing and design approved by Engineer in Charge. 56 Carpenter 2nd class 57 Fitter (grade 1) 58 Helper( for pluming work) 59 Mistry 60 Blacksmith 1st class 61 Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height = Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etc.PVC pipe 110 mm dia 62 Construction of Cement Concrete Chamber 125 mm dia Stainless Steel Sheet Grating 63 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.
