Tender For Murud Municipal Council Hadditil Maratha Samaj Temple for renovation and provision of facilities.-1 2 7 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. (I/P-46.29/303) 17.66 CMT 1596.10 (I/P-46.15/302 21.50 SMT 171.60 7 3 Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc, complete. 4 5 6 I/P-46.23/302) 131.06 SMT 7 7 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stackin the materials as directed with all leads, lifts etc. complete 16.50 (I/P-46.19/303) 18.46 SMT 49.50 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/quartzite/gneis metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (I/P-25.52/185) 5.78 CMT 14105. Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering. formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (I/P-25.72/186) 7.91 CMT 15935.1 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending. 7 hooking the bars, binding with wires or tack welding and supporting as required complete. (I/P-26.33/192) 2.16 7 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to 8 concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. MT 98673.3 7 9 (I/P-32.04/211) 188.68 SMT 305.8 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (I/P-32.15/212) 7 188.68 SMT 71.5 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement 10 bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete 7 (I/P-32.11/211) 82.86 SMT 702.90 7 7 Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos 11 cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (I/P-36.03/230) 188.68 SMT 13.20 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. 12 (I/P-35.23/228) 188.68 2 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface applying primer coat scaffolding if necessary, and watering the surface for two days etc complete. SMT 237.60 13 (I/P-35.26/228) 82.86 SMT 324.50 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 14 (I/P-33.48/220) 9.68 SMT 2603.70 7 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 15 (I/P-39.09/249) 6.30 SMT 3386.90 7 Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. 16 (IVP-39.82/265) 1.58 SMT 7202.80 7 Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with 17 powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. (I/P-39.68/262) 0.54 SMT 3813.70 7 Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking 18 section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detaile drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box (I/P-39.41/256) 13.08 SMT 6052.20 7 Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and 19 skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (I/P-33.27/215) 93.28 7 SMT 1531.20 7 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 20 (I/P-33.24/217) 2.10 SMT 1300.20etc 7
