Tender For Addition / Alteration To Bldg No P-867 Under Ge (Af) Srinagar.; 1 Schedule A Part-I (B/R Work) 2 S&F in repairs Pre-painted (in camouflage pattern) galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 3 S&F in repairs Pre-painted(in camouflage pattern) galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 4 Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed. 5 M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. 6 M&L for 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing / grinding and polishing upto mirror finish complete over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. 7 M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. 8 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. 9 M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. 10 M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. 11 M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. 12 M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. 13 Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed. 14 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed. 15 M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. 16 M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 17 S&F powder coated superior quality venetian blinds horizontal or vertical type, complete all as specified and directed. 18 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 19 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 20 S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed . 21 S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. 22 S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. 23 Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 24 Preparation of old wood and wood based surfaces of any description exc 10cm with or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. 25 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. 26 S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 27 S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 28 S&F 150mm size Aluminium anodised, handle of extruded section, fabricated type, anodised and fixed, complete all as specified and directed. 29 S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. 30 S&F 125mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. 31 S&F 125mm size Aluminium anodised, handle of extruded section, fabricated type, anodised and fixed, complete all as specified and directed. 32 S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. 33 S&F 100mm long floor door stopper of aluminium alloy body and tongue with rubber cover ends, complete all as specified and directed. 34 S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply andfixing of 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. 35 S&F aluminium powder coated ventilator (minimum thickness of powder coating 50 micron) having fixed glass with aluminium section having section 50.80mm x 25.40mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick plain glass making frame and glass water tightening making it good etc., complete all as specified and directed. 36 S&F in repairs 12mm thick toughened glass for door with necessary long solid fancy handle, suitable hinges, locking arrangement, hydraulic floor spring as required, design as approved by GE, complete all as specified and directed. 37 S&F in repairs 18-19mm thick block board, grade-I quality, exterior grade, commercial type, fixed with screws to timber framework as n shelves of built in cupboard, partition, pelmet box and similar work, complete all as specified and directed. 38 S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, complete all as specified and directed. 39 S&F 30mm width of flaps continuous (piano) hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed. 40 S&F 40mm dia brass polished cup board knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed. 41 S&F 100mm long brass handle, bright finish fixed with brass screws, nuts and other necessary fitting, complete all as specified and directed. 42 S&F in repairs 100mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and directed. 43 S&F for in repairs 20mm thick wooden planks of second class hard wood, planed one side and edges tongued and grooved or rebated fixed, repairs to replace old and or decayedboarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed. 44 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. 45 S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm, complete all as specified and directed. 46 S&F in repairs decorative type wallpaper of good quality surface finish, colour ,design and pattern as required fixed with approved adhesive as per manufacturers instructions as approved, complete all as specified and directed. 47 Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed. 48 S&F in repairs 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame workfor wall / flooring / ceiling, complete all as specified and directed. 49 S&F in reapirs 9mm thick veneered decorative plywood, grade-1 (BWR regin) with one face has decorative veneer fixed with screws/ nails to timber frame work for wall panelling / celling, complete all as specified and directed. 50 S&F in repairs 20mm to 25mm thick second class softwood weather boarding, clean sawn, rebated on thick edge to give 20mm laps and fixed in eaves board etc. upto 15m height, complete all as specified and directed. 51 S&F in repairs 2nd class hardwood plain fillets, square rectangular or triangular in section clean sawn, screw with nail bull nosed, splayed chamfered or rounded on one edge or face wrought, sec area exc 3 sqcm but not exc 6 sqcm as in cover fillet, complete all as specified and directed. 52 Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. 53 M&L for brick work with sub-class `B bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. 54 Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. 55 M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. 56 M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. 57 Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 3mm thick wall careputty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed. 58 Preparation of newly plastered surfaces of wall sides and soffits of the beams, ceilings, fascias, parapets etc. and applying two coats of weather paint (Apex) over a coat of exterior primer on, colour and tint as directed in any pattern including scaffolding up to 15m height, complete all as specified and directed. 59 Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting exc 10cm but not exc 20cm girth, complete all as spcefied and directed 60 S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. 61 S&F in repairs for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. 62 M&L for Lagging to 15mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. 63 M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. 64 S&F in repairs vitreous china, table top, wash hand basin of size 600mm x 435mm x 180mm, fancy type, including 32mm dia CP waste coupling and waste pipe, complete all as specified and directed. 65 S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed. 66 S&F in repairs 32mm dia bore PVC flexible waste pipe, complete all as specified and directed. 67 S&F in repairs for 900mm x 600mm x 8mm thick bevelled edge mirror of selected quality glass, with design all round the edge of glass, fixed to wall with all required fittings, complete all as specified and directed. 68 S&F in repairs for 450mm x 1200mm x 8mm thick bevelled edge mirror of selected quality glass, with design all round the edge of glass, fixed to wall with all required fittings, complete all as specified and directed. 69 S&F in repairs Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed. 70 S&F in repairs toilet paper holder, vitreous China, box type, white,fixed to walls with chromium plated brass screw, complete all as specified and directed. 71 S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5m fitted in the existing water connection in the toilets, complete all as specified and directed. 72 S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. 73 S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, with capstan handle, screwed down, screwed from iron pipe or for brass ferrule, complete all as specified and directed. 74 S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed. 75 S&F in repairs 15mm bore shower rose cast copper alloy, chromium plated with swivel joints, fancy type with CP neck9 long made to shape, complete all as specified and directed. 76 S&F in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges, complete all as specified and directed. 77 S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 900mm x 975mm including fixing to wall and all accessories, complete all as specified and directed. 78 S&F in repairs sink with drainage board (triple bowl), made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. 79 S&F in repairs sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with 32mm dia waste pipe plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. 80 Dismantling of timber scantlings 40 sqcm and over in section, in any position unframed work, complete all as specified and directed. 81 M&L for second class hardwood in scantlings frame work, wrought, complete all as specified and directed. 82 S&F in repairs for 3 tier corner glass shelf of size 300x300mm (big), 200x200mm (medium) and 150x150mm (small) three set, with chromium plated brackets and railing, complete all as specified and directed. 83 S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. 84 S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed . 85 S&F in repairs 15mm bore chromium plated wall mixer 3-in-1 system wall mixer with overhead and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower, complete all as specified and directed. 86 S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. 87 S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed. 88 S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, two way, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 89 S&F in repairs stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed. 90 S&F in repairs vitreous China urinal half stall type, white, suitable for childrens with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs,bedding urinal agaist wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including CP urinal spreader of any colourfor fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed. 91 S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length withrubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed 92 S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length withrubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed 93 S&F in repairs 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed. 94 S&F in repairs 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. 95 S&F in repairs 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. 96 S&F in repairs 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. 97 Complete removal of existing treatment of walls and applying 1mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint, complete all as specified and directed. 98 S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. 99 S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. 100 Complete removal of existing treatment from brick walls or concrete plastered or unplastered surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of weather paint (Apex) over a coat of exterior primer, complete all as specified and directed. 101 Demolition of cement concrete (unreinforced)in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed. 102 Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed. 103 M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and as directed. 104 M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. 105 M&L for chequered cement concrete tiles size 300 mm x 300 mm x 22-25mm thick with grey cement and pigment , rubber moulded with laquer polish for extra shine, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. 106 M&L for 20mm thick vitrified parking tiles heavy duty, exterior grade, textured finished of size 400X400mm over and including 20mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed. 107 M&L for 100mm thick plain cement concrete, 1:4:8, typeD-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. 108 M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006, M-35 with grey cement and pigment over and including 50mm thick PCC 1:2:4, type B-2 (Using 40mm graded crushed stone aggregate) and including 50mm thick compacted bed of fine sand, complete all as specified and direction. 109 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 110 M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. 111 Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. 112 M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new wooden works with two or more coats, complete all as specified and directed. 113 Schedule A Part-II (E/M Works) 114 Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point includingfixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made asper conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surfaceand finishing the surfaces as per existing,complete all as specified and directed. 115 M&L for Point wiring for one light / fan point controlled by one way switche on Independent boardwith 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen (FRLSH) copper conductor single core multi stranded copper cable confirming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0mm thick and minimum 20mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked)including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment, provision for fixing of modular flush boxes of appropriate size and dimensions for fixing ofpiano switches / sockets / regulator etc., including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earthlead wire connected to common earth and earth dolly, complete all as specified and directed. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately 116 All as per Ser item No 113.00 here in above but 3 pin 6 Amps switch socket outlet point on same board. 117 All as per Ser item No 113.00 here in above but 3 pin 6 Amps switch socket outlet point on independent Board. 118 All as per Ser item No 113.00 here in above but for one 3 pin socket outlet 15 Amp point controlled by one switch on independent board using cable of size 2.5 Sqmm with 2.5 Sqmm copper conductor (in green colour) for as earth continuity conductor. 119 S&F Modular cover plate with frame as per site requirement for following module:- 120 1 Module 121 3 Module 122 4 Module 123 6 Module 124 S&F Modular metal Flush box as per site requirement for following module:- 125 1/2 Module 126 3 Module 127 4 Module 128 6 Module 129 M&L for Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed. 130 M&L for Modular switch 1 way, 16/20 Amp, 230 volts ,1 Module, complete all as specified and directed. 131 M&L for Modular socket 6 Amp, 230 volts, 2/3 Pin universal, 2 Module, complete all as specified and directed. 132 M&L for Modular socket 16 Amp, 230 volts, 2/3 Pin universal, 2 Module, complete all as specified and directed. 133 M&L for Modular fan step regulator 100 watt, 2 Module, complete all as specified and directed. 134 S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed. 135 S&F Lamp holder, white polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting, complete all as specified and directed. 136 S&Fin replacement energy efficient 20 watt LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver, Aluminiumchannel housing & Polycarbonate diffuser of length 1200 mm (approx.), color temperature 6500 K or as directed, luminaire efficacy not less 100 lm/W with all accessories, fixing arrangement internally pre-wired, making all connection using 1.5 sqmm copper conductor multistrand PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting, complete all as specified and directed. 137 S&F in replacement 10 watt LED light fitting mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistrand PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit, complete all as specified and directed. 138 S&F in replacement LED luminaire 600mm x 600mm, 35/36 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexiable copper conductor cases of suitable size, complete all as specified and directed. 139 S&F 10 watt outdoor spot light, heavy duty aluminium warm white with narrow and long distance beam with CREE LED and high quality driver, complete all as specified and directed. 140 S&F 25 Watt lycus LED spike light, environmental friendly, new generation, energy saving, decorative IP-66 LED spike light using COB LED as light source, complete all as specified and directed. 141 S&F Flexion AC LED rope, warm white, 144D Strip 6500 K IP-65 50m , IP-65 LED strips, including necessary connectors, rope clips (for fixing of LED strip rope), complete all as specified and directed. 142 S&F 18 Watt LED scenary light, 2 feet, warm white including fixing on the top of sceneries with all electrical and driver conections, complete all as specified and directed. 143 S&F 7 Watt LED COB LED ultra bright compact downlighter in polycarbonate housing, environmental friendly, new generation, energy saving, decorative IP-66 LED COB light using COB LED as light source, complete all as specified and directed. 144 S&F 10 Watt crystine pendant LED ultra bright, environmental friendly, new generation, energy saving, decorative IP-66 LED pendant light usingas light source, complete all as specified and directed. 145 S&F of Exhaust fan, made of sturdy Engineering steel body, complete with louvers shutter, 450mm sweep, voltage 230V, 50 Hz, RPM 1200, copper winding, including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose, including outside louvers with proper hole, and necessary fixing arrangment and making good to disturbed surfaces, complete all as specified and directed . 146 S&F 25 Litre capacity electric water heater (geyser), storage type steel body with copper inner tank and heating element upto 2KW, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV,connection piece etc., complete all as specified and directed. 147 S&F Sheet metal enclosure MCB distribution board single pole & neutral, 240 volts, 08 way with IP-43 IK-09 protection double door complete with 200 Amps bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. 148 S&F sheet metal enclosure distribution board, double door type, as per IEC 61439-3 (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 200 Amps rated copper busbar, 415 Volts with in built MCCB 125 Amps, 16KA, 2 neutral bar and 2earth bar IP 54 protection, cable ties for cable management (fully insulated busbar and shrouded neutral bars), reversible door for IP 43 & IP 54, flush mounted to wall, complete all as specified and directed. 149 S&F MCB of single poles and current carrying capacity 6 to 32 Amp,240V, 10 KA B curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. 150 S&F MCBsingle pole and neutral ISI marked `B seriesworking on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 32 Amps 10 KA breaking capacity etc all as specified and directed. 151 Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire up to 7.5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion. Note: (i) The unit rate includesmain earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. 152 Sub main wiring with three runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note : 3 runs of 4 sqmm copper cable & 1 run of 4 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. 153 Sub main wiring with three runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note : 3 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. 154 Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, size of cable 16 Sqmm 4 core, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitablethe cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc. including taking out unserviceable cable, complete all as speccified and directed. 155 Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc all as specified and directed 156 Returing, filling in incl spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables,jointing & testing complete all as specified and directed. 157 Removing excavated material to a distance n.exc 50 m & depositing where directedat a level n. exc 1.50 m above the starting point complete as specified and directed. 158 M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc., complete all as specified and directed. 159 M&L for laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks, complete all as specified and directed 160 S&F 40mm dia galvanised steel tube, light grade, for protection of copper strip / cable at wall and duct / road / trench, complete all as specified and directed. 161 S&F in replacement weather proof thermo (Polysterene)cable junction box, having protection class IP-66 and overall minimum size 155 x 210 x 92mm having metric knockouts on the wall, dully fixed on the pole with aluminium strip 25 x 3mm clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 17mm (complete with check nut) and including cable connector and 32 Amps MCB SP 01 No, complete all as specified and directed. 162 M&L for plain cement concrete, 1:2:4, Type B-1 (using 20mm graded crushed stone aggregate) as in pole foundation upto the height of 50cm from the ground level and 600mm diaincluding necessary form work and painting with oil bound distemper over a coat of primer, complete all as specified and directed. 163 S&F 12 Watt inventa reva LED garden bollard light, new generation, 2 feet, waterproof, Rust proof, energy saving environmental friendly long life aesthetially designed with good indirect symmetrical light distribution, dia cast iron/aluminium IP-65 protection, complete all as specified and directed. 164 Supply, installation, testing & commissioning, LT panel cubical type of size 0.9 x 0.6 x 0.6 Metre,CPRI Approved, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, outdoor type, factory fabricated, duly powder coated inside and out side, outer cover made out of 3.15 mm thick CRCA sheet, internal cover and partition made out of 2mm thick CRCA sheet with angle iron 40mm x 40mm x 6mm and 0.5m long covered from all side with front and back openable, dust, vermin and weather proof including suitable rating Copper bus bar for 3 phase 4 wire system, wiring with suitable size coppercable and embedded in brickwork with nuts, bolts and washer etc., complete comprising of following including taking out the old unserviceable panel, complete all as specified and directed. 165 Incoming:-(a) MCCB 250 Amp, 4 pole, 36 KA, 415 volts AC with adjustable thermal and adjustable magnetic setting- 01 No.(b) Copper bus bar 200 Amp TPN - 04 Nos(c) Digital voltmeter 0-500 volts with selector switch - 01 No(d) Digital Amp meter0-200 Amp with selector switch & CT - 01 No(e) Indicator lamp LED type (R, Y, B) complete with Bakelite fuse fitting - 01 SetOutgoing:-(a) MCCB 100 Amp, 4 pole, 36 KA, 415 volts AC- 02 Nos. (b) MCCB 63 Amp, 4 pole, 25 KA, 415 volts AC-01 No .Note: LT panel board shall be mounted on brickwork in CM 1:4 not less than 60 cm above ground level and 30 cm below ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. 166 Supply, installation, commissioning and testing high wall with cordless remote with inbuilt Heating and Cooling arrangement split type air conditioner of capacity 1.5 TR suitable for non CFC refrigirant gas including material and labour for the following works invalved for smooth functioning & installation of outdoor/indoor for split type AC all as directed by Engr-in-charge:-(a) Fixing the heating & cooling unit with grounting nuts, cutting groove to wall for gas pipe and water drainage pipe complete.(b) S&F cutting, bent to shape copper pipe of appropriate size from outdoor unit to indoor unit by cutting holes to wall including brazing the copper pipe, fixing union all as required at site.(c) S&F 20mm dia PVC pipe transparent flexible heavy duty for drainage pipe (approx-3.0 M).(d) Insulation of both the copper pipe with insulating material and covering the complete pipes with PVC casing & caping of size 75x75mm for mechanical protection of copper pipe complete. 167 (e) Charging of correct quantity non CFC refrigerant gas after necessary brazing/fixing of both the outdoor/indoor unit and testing complete on load up to saitisfaction of EIC.(f) S&F MS bracket factory made, fixed on wall through fastener of appropriate size and guage for installation of out door unit (condensing unit) complete all as direced.(g) M&L for provision of shed for outdoor unit made of MS sheet 2.0 mm thick and MS angle 30x30x5mm complete.Note - (i) All other connected civil works and other miscellaneous works required for installation of split AC & copper functioning as directed by Engr-in-charge shall deemed to be included with the quoted rate. 168 S&F industrial single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole b series MCB of capcity 20 Amp, 10 KA 230 V etc., complete as specified and directed 169 Deduction to be made from BOQ for Schedule A Part-III (Credit Schedule from dismantling / taking down items) worth Rs 1,09,525.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)
