|
| 1 | Earth work excavation soil and depositing on bank with initial lead of 10m 100m and lift of 2m in Hardstiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., completeincluding cost of all materials lead lift etc complete as directed by the department engineer at site. |
| 2 | Providing M sand filling in foundation including cost of sand, filling charges, watering and consolidation etccomplete. including cost of labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site. |
| 3 | Providing and laying Plain Cement Concrete 1:3:6 using 20 mm HBG stone for foundation including cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site. |
| 4 | Providing and laying R:C:C1:1.5:3 with minimum cement content of 315Kg/cum using 12 to 20mm HBG metalfor Raft including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. Without form work |
| 5 | R:C:C1:1.5:3 using 12 to 20mm HBG metal without form workincluding cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. Without form work Plinth |
| 6 | R.C.C. 1:1.5:3 using 12- 20mm metal for foundation for Plinth using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and \"B.G.10\" guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. |
| 7 | R.C.C. 1:1.5:3 using 12- 20mm metal for foundation for Cable duct withform work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and \"B.G.10\" guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. |
| 8 | Supplying and fabricating and placing in position of steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc. comlete as directed by the department engineer at site. |
| 9 | Providing and laying P:C:C 1:2:4 using20mm HBG metal for plinths without form work including cost of all materials,curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site |
| 10 | Providing and laying P.C.C 1:2:4 using20mm HBG stone forwithform workusing steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and \"B.G.10\" guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. |
| 11 | Labour charges for back filling of pits with excavated earth other then sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard specification and as directed by the engineer at site including all labour, transportcharges, lead and lift etc., complete. |
| 12 | Fabrication, Supplying and fixing of 20mm dia GI Bolts & nuttsof specified length threading for a length of 15cm at top and 15cm L at bottom and hot dip galvanising of bolt including supply of 2nos. of GI nuts & washers and fixing in the position as directed by the engineer at site including assembling of template etc., cost of all materials labour lead lift etc. complete.20 mm dia GI Bolt & Nuts with 1mtr length |
| 13 | Plastering in CM 1:312 mm thick for bottom of roof slab, bottom and sides of sunshade partition walls etc including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site. |
| 14 | Colour washing two coats using cement paint over one coat of white washing including cost of all materials, labour, lead lift etc., complete as per standard specification and as directed by the department engineer at site. |
| 15 | Labour charges for assembling and re-fixing of template in correct position and aligenment for various equipment plinth and grouting the foundation boltsincluding cost of all materials transport, labour, lead, lift etc., complete as directed by the dept. Engineer at site. |
| 16 | Fabrication galvanising and supply of GI tower parts-MSof various type of normal, location specific narrow base tower, location specific special tower and its extension tower parts, tower body/leg extensions hanger rods, D-shackles, U-bolts etc including cost of all materials, labour, transport,leads, and lifts etc., complete as directed by the department engineer at site. (Exluding bolts, nuts and stubs) |
| 17 | Supply of hot dipped GI bolts & nuts, including packing wahsers and electro galvanished spring washers as per relevent IS test including cost of all trasport charges leads and lifts etc., as per standard specification and as directed by the department engineer at site. |
| 18 | Labour charges for removal of surplus earth from the site and putting into low lying area outside the yard upto 2 Kms away from the site including the cost of all labour, transport, lead, lift etc., complete as directed by the department engineer at site. |
| 19 | Filling with 20 mm B.G metal including cost of all labour, materials, transport, leads, lift,etc., complete and as directed by the department engineer at site. |
| 20 | Filling withstone dust including cost of all labour, transport, materials, leads, lift,etc., complete and as directed by the department engineer at site. |
| 21 | Supplying, fabricating of GI angle supports ,Flats including cutting ,welding,fabicating and placing inposition,allmaterials,galvanizing, transportation, labour, lead, lift etc complete as per standard specification and as directed by thedept. Engr at site |
| 22 | Supplying, laying of PVC pipe with required PVC bend T&L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 32 mm dia 10 kg/cm2 |
| 23 | Supplying, laying of PVC pipe with required PVC bend T&L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 25 mm dia 10 kg/cm2 |
| 24 | Supplying, laying of PVC pipe with required PVC bend T&L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 20 mm dia 10 kg/cm2 |
| 25 | Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 32 mm dia |
| 26 | Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 25 mm dia |
| 27 | Supplying & fixing in position of 20mm dia PVC tap of approved make and quality including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. |
| 28 | GST for bidders within TamilNadu |
| 29 | SGST |
| 30 | CGST |
| 31 | GST for bidders outside TamilNadu (IGST) |
