Tender For Provn Of Laboratories In Kendriya Vidyalaya No. 1 At Airforce Station Suratgarh; 1 BOQ (PROVN OF LABORATORIES IN KENDRIYA VIDYALAYA NO. 1 AT AIRFORCE STATION SURATGARH) 2 Surface excavation not exceeding 30cm and average 15 cm deep and getting out in soft /loose soil complete all as specified and as directed. 3 Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or manholes, pier holes, etc. not exc 10 sqm on plan and getting out in soft loose soil complete all as specified and directed. 4 All as per Sr item no 2 but depth exc 1.5 mtr but not exceeding 3.0 mtr. 5 Forming embankment including raising earth, spreading in layers not exc. 30 cm thick, watering, ramming (rolling and finishing to reqd size not exc 1.5 mtr high from base). Complete all as specified and directed. 6 Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil, complete all as specified and directed. 7 Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. 8 M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 completeall as specified and as directed by Engr-in-Charge. 9 M&L for 75mm thick plain cement concrete 1:3:6, type C2, using 40mm gradedcrushedstoneaggregateasinplinthprotection,laidin slope of 1:12 and surface finished even and smooth without using extracementincludingmakingjointat2.5mintervalandateach cornerthejointshallbefilledwithbitumenmasticfillingtofull depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed. 10 M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. 11 M&LPCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundations, filling & mass concrete. Complete all as specified and directed. 12 M&L of Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface areacomplete all as specified and as directed. 13 M&L of Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed. 14 M&L of Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed. 15 M&L of Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed. 16 M&L of Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. 17 M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded aggregate) as in slabsupported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves. complete all as specified 18 All as per item No 16 here in before but RCC M-25 (Design Mix) as in Column/Pillar. complete all as specified and directed. 19 same as above but as in foundation, footings, fdn beam, plinth beam & mass concrete. 20 same as above as in beam, cantilever, lintels over 1.5 mtr span. 21 M&L for TMT mild steelbars 10 mmdiaandover,cut to length,bent toshaperequired,includingcranking,bending spirally for hoopingforcolumn,hooking end and binding with and including mild steel wire (annealed)notless than 0.9 mm dia or securing with clipscomplete all as specified and directed. 22 M & L for TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders. complete all as specified and directed 23 M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). Complete all as specified and directed. 24 M & L for formwork formwork to sides and soffits of floor or roof beams, beam haunch ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and directed. 25 All as per item No 23 but formwork as in sides of concrete foundation, footing, bases of column, plinth beams as for rough finished surfaces. Complete all as specified and directed. 26 All as per item No 23 here in before but formwork as in sides of Column, pillar, post. Complete all as specified and directed. 27 M&L White vitreous china laboratory sink of size 600x450x200mm including plugs, washers and wastes;including beding in cement mortar and connecting union to waste pipe CP waste coupling 32 mm dia ,and necessary fittings fixed complete all as specified and as directed. 28 S&F powder coated anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed 29 S&F forpowder coated anodized aluminum window and ventilator shutter, side hung type without sash, aluminum sections weighing 0.55kg/m incl necessary jointing cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, anodized aluminum fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long(2 No) suitable handle (1 No), complete all as specified and directed. 30 M&L for hard core of broken bricks of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 7.5 CM thick water and rammed to a true surface. complete all as specified and directed. 31 M&LforPressedsteelframesofsize125mmx60mmmadeof 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. 32 M&L for PCC 1:3:6 type CO (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frameincluding necessary form work all asspecified. 33 S&F30mm thick factory made Flush shutter solid core construction block board core and plywood face panel commercial type on both side complete all as specified. 34 S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. 35 S&F butt hinges, stainlees steel 100mm long(ISI marked), complete all as specified and directed 36 S&F Aluminum handles, 150 mm size plate type complete all as specified and directed. 37 S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. 38 S& F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and rollar plate, fixed including welding/ fixing to steel/ wooden chowkats, complete all as specified and directed. 39 S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, castorexcludedsectionsandfixingboltsandslidingboltsof excluded sections or cast aluminum alloy and fixed, complete all as specified. 40 S&F Stainless Steelwire cloth0.36mmnominaldiaofwire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. 41 M&Lfor12mm thick rendering incementmortar 1:6 onfair faces of brick work or concrete surfaces finished even and smoothwithoutusingextracementas on wall completeall as specified and directed. 42 Material and labour for 15mm thick rendering in cement mortar 1:4 mixed with approved water proofing compoundon fair facesofbricksurfacesor concretesurfaces,surfacefinished even and smooth without using extra cement allas specified and directed.Note: Water proofing compound shall be measured and paid separately. 43 M&L for 5 mmthickrenderingin cement mortar1:3 on concretesurfacesofroofprojection/ ceilingetc surfacefinished evenandsmoothwithoutusingextracement,completeallas specified and directed. 44 M&Lforpreparationofnew plasteredorunplasteredsurfacesof wallandapplyingtwocoatsofoilemulsiondistemperover 1.5 mmthickJK/Birlawallcareputtyto achievesmoothfinishsurface,completeallas specifiedand directed. 45 M&Lforpreparationofnew plasteredorunplasteredsurfacesof ceiling andapplyingthreecoatsofwhitewash,completeallas specified and directed. 46 Applying two coats of exterior acrylic emulsion (weather proof treatment ), in plain patterns, over new plastered surfaces , including preparation and using primer new surfaces ,complete all as specified and directed. 47 M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 48 M&L for coloured vitrifieddouble charged ceramic tiles 9 to 10 mm thick (square/rectangular) area of each tilesexceeding 0.36 Sqm butnot exc 0.42 Sqm,in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6,complete all as specified and directed. 49 All per Serial item 50 here in before but tiles as in vertical surfaces and jointed in 10 mm thick in cement mortar 1:4. 50 M&L for Machine pressed precast concrete interlocking paver blockany shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,with grey cement and pigment, incl 25 mm thick layer of fine sand. complete all as specified and as directed. 51 M&Lformachinecutpolishedkotastoneslabflooring of size of Kotastone 550 mm x 550 mm and 18-20 mm thickovercementscreedbaselaid andjointedwithgrey cement slurry mixed with pigment to match the shade of the slab,laid over andincluding20mmthick screedbedincement mortar1:6, rubbing,grindingandpolishingtoachievemirrorfinish,complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. 52 M&Lforpolishedkota stoneslab 18-20 mmthick inriser of steps,skirting,dado andpillar laid over cementscreed and jointed with greycement slurrymixed withpigment to match theshade oftheslab, laidoverandincluding10mmthick renderingincementmortar1:4, rubbing,grinding,roundingof edges andpolishingtoachievemirrorfinish,completeallas specified and directed.Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. 53 M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill, platform and likeincluding pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external. complete all as specified and as directed. complete all as specified and directed. 54 S&F 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe 55 S&Finrepairsstop/anglevalves,15mmbore,fancytype,chromium plated,castcopperalloy, screwed down,highpressurewith crutchor butterfly handle,both endsscrewed foriron pipe orfor union etc., complete all as specified and directed. 56 S&F in repairs PVC connection 15mm dia, 450mm long, hot water grade with brass chromium plated nuts and washersat both ends, complete all as specified. 57 S&F 15mm Stop valve,fancy type, chromium plated with long shunk and cup (cocealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed 58 S&F PVC (SWR) pipes, 150mm dia, single socketed, in anylengthwithrubberringjoints,laidintrenchesorinfloors or walls, complete all as specified & directed. 59 S&F 150mm borePVC(SWR)bends anyradius, complete all as specified and directed. 60 S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetowalls and ceilings or laid in floors,complete all as specified & directed. 61 S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetofloor, walls and ceilings or laid in floors,complete all as specified & directed. 62 All as per Sr item No 60 here in before but GI pipe of 25 mm bore. complete all as specified and directed. 63 S&F 110 mm bore PVC (SWR)junction single (Single T ) with access door equal or unequal, complete all as specified. 64 S&F Brass chromium plated bottle traps 40mm for sinks with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixedcomplete all as specified and as directed. 65 M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cementcomplete all as specified and as directed. 66 S&F Rotational moulded polythelene white water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including20mmfor ball valve brass high pressure, with polythene float and fly nutcomplete all as specified and directed. 67 M& L for 18mm thick solid HDHMR board with 0.9-1.20mm thick sunmica leminated sheet on both side of two different colours (colour finish) as in kitchen cabinet shutter,jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel pianohinges suitable for 18/19 mm HDHMRBoard (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome DoorHandle 100mm long (01 Nofor each leaf of shutter) and Door catcher (01 no for each leaf), complete all as specified and as directed.Note: (a) Quoted unit Rates are inclusive of PVCboard,handles,hinges,screws,Door catcher and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. 68 M&L for PCC (1:2:4), nominal mix, type B-1, using 20mm graded crushed stone aggregate as in PCC padding on surfaces of roof finished even and fair without using extra cement, complete all as specified. 69 M&L for water proofingtreatmentwithAPP based modified 5 layered prefabricated water proofing polymericmemberaneoverroof consistingofcleaningofconcreteorplasteredsurfaceofroofand applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg persqmfollowedbyatackcoat@1.2kgperSqmusing85/25 gradeindustrialhotblown bitumenoveritlaid withAPP modified polymericwaterproofingmembraneminimumweighting3.0 kgper Sqmreinforcedwithnon-wovenpolyesterfabric(weightnotless than 170 gm persqm) unrolled& bondedto substratewith longitudinal and end laps 100mm as per manufacturers instruction andapplyingoveritatackcoatusing85/25gradeindustrialhot blown bitumen @ 1.2 kg sqm andas per manufacturer instruction and complete all as specified and directed. 70 M&L for 15 mmthickrenderingin cement mortar1:4on roofsurfaceusingwaterproofingcompundaspermanufacturer instructionsurfaces finished even and fair withoutusing extra cement. complete all as specified and directed. 71 M&L for 40 mm thick brick tiles laid on and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on above treated surface complete all as specified and directed. 72 M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base; concrete surface finished even &rough to receive topping floor/tiles finish/layer complete all as specified. 73 Supply liquidwater proofing compound(ISI marked), complete all as specified and directed. 74 M&LforpointwiringwithsinglecorePVCinsulatedunsheathed 1100 volts grade FRLScable ofcopper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigidPVCconduitmediumgrade,ISImarked notless then 20/25 mm dia with all accessories like tee, straight joint, L bend etcconcealedin wall,ceiling,flooretc,pressedMS Sunkenboxes in wall of required size and colour for switches and sockets, 1.5sqmm (Nominalsize) PVC insulated (green insulation)copperconductorFRLSearthcontinuitycabledrawn withwiringandconnectedtocommonearthdolly allasspecified foronelightpoint/Ceiling fan/ Ehaust Fan and wall mount fancontrolledbyoneSPswitchincludingmaking good distrubed surface, complete all as specified and directed.Note:- CostforMS Sunken Boxes, plates for modular switches, cutting,chieselingand cutting the wall/Ceiling for conduit fixing,makinggoodto existing surfaces (Matching with existing colour)shall deemed to be included in the quoted rate. 75 All as per Srl item No 73 here-in-before but for one 5 pin socket outlet,6Ampsonsameboardwiththecable1.5Sqmmsize, complete all as specified and directed. 76 All as per Srl item No 73 here-in-before but for one power point 6 pin15Ampssocketoutlet andGeyser Point for sheet metal enclosure with2.5Sqmm strandedcopper conductorFRLScablePVCinsulatedincludingearthwire2.5Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed. 77 All as per item Sl No 73 here in with but for AC Point for sheet metal enclosurewith4Sqmm strandedcopper conductorFRLScablePVCinsulatedincludingearthwire 4Sq mm copper conductor FRLS cable connected to earth dolly complete, all as specified and directed. 78 S & F modular one module switch single pole one way 5 amp 240 volts, all as specified and as directed. 79 S & F Socket outlet two module, 2 in 1, 3 pin, 5 amps, 240 volts all as specified and as directed. 80 S & F modular switch single pole one module way 15 amp 240 volts, all as specified and as directed. 81 S & F modular Socket outlet 2 in 1, 3 pin, 5 and 15 amps, two module flush type, 240 volts all as specified and as directed. 82 S&Fofceilingrose,surfacetype,65mmx50mm, 3terminal complete all as specified and as directed by Engr-in-Charge. 83 Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all asspecified and directed by Engr-in-Charge. 84 S&F LED sleek mirror light fitting 10 watt provided with high output diffuser2feet,230VoltscompleteLEDtube rod10 wattwith all accessories, pre wired and including connecting up with twin core copper conductorcable completeall asspecified and directed by Engr-in-Charge. 85 S&F in replacement ofLED building security light 30 watt, 230V with lens and toughen glass top.The luminarie should have a color temperature of 6500K, IP 65 complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastenerall as specified and directed. 86 Supply and fix ing 40 mm bore steel water tubing light grade galvanised for cable protection. complete all as specified and directed. 87 S&F in replacement sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete withonesinglepoleMCB20amps,240volts,completeallas specified and directed. 88 Supply and Fixing Sheet metal Vertical TPN double door DB 4 Way, 415 Volt, TPN with 200 Amps rated bus bar and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge 89 S&FofMCBSP,6-32A,10KA, C Curve completeallasspecifiedandas directed . 90 S&FofMCBSPN,40 to 63A,10KA, C Curvecompleteallasspecifiedandas directed. 91 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, 350 RPM, Min air delivery 210 CMM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting up including provision of copper cable of size 1.5 sqmmfrom ceiling rose or connector to fan complete allas specified and directed. 92 S & F in MCB TPNfour poles,100 Amps, breaking capacity 10 KA C curve confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. completeallasspecifiedandas directed 93 Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable, multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 35 sq mm 3.5 core complete all as specified and as directed. 94 Supply and fixing of gun metal gate valve with iron wheel head screwed both ends size 25 mm for iron/GI pipes complete all as specified and directed. 95 Supply and fixing of gun metal gate valve with iron wheel head screwed both ends size 20 mm for iron/GI pipes complete all as specified and directed. 96 M&L for Earthing complete for bldg with galvanised mild steel plate electrode, 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300mm x 300mm x 300mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320mm x 320mm of RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed. 97 Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page Noof tender documents.
