|
| 1 | Surface excavationn.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil. |
| 2 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soilcomplete in all respect as specified and directed |
| 3 | Excavating in trenches exc. 1.5 m deep but n exc 3 m Deep, for foundation etc., or for shafts, wells cesspits, manholes, pier holes, etc.and getting out in any type of soil.(Soft/loose soil) complete in all respect as specified and directed. |
| 4 | M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate)as in foundaion and mass fillingcomplete in all respect as specified and directed |
| 5 | Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete in all respect as specifified and directed. |
| 6 | Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed. |
| 7 | Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.; complete in all respect as specifified and directed. |
| 8 | Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) inslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ; complete in all respect as specifified and directed. |
| 9 | M & L forformwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 10 | M & L forformwork to sides of pillars, posts, struts, piers,columns and stanchionsin rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 11 | M & L forformwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 12 | M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 13 | M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirallyfor hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed. |
| 14 | M & L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirallyfor hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed. |
| 15 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using FE-410W (Grade E-250 quality \"A\") complete all as specified and directed. |
| 16 | S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps bases, splices, agnle brackets cleats and other connection confirming to Fe-410-W (Gde-E-250) quality-Acomplete all as specified and directed. |
| 17 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.Note-The measurement shall be carried out as in plain |
| 18 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete all as specified and directed. |
| 19 | S&F coloured 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheethaving tensile strength of 550 Mpa as in ridge or of similar type, fixed with self tapping screws alongwith bitumen washer fixed over mild steel flats, angles etc fixed with framed structure complete allas specified and directed. |
| 20 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type complete in all respect as specified and directed. |
| 21 | Providing and laying 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using type B-0, 1:2:4 concrete(using 12.5mm nominal size crushed and graded stone aggregate) mixed with water proofing compound complete in all respect as specifified and directed. (Water proofing compound shall be measured & paid separately under supply only item) |
| 22 | Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete complete in all respect as specifified and directed. |
| 23 | M&L for 18-20mm thick machine cut kota stone slab flooring of size not less than 500X500mmlaid over and including 20mm thick cement mortar (1:6) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed. |
| 24 | M & L for 18-20mm thick machine cut kota stone slab of size not less than 500X500mm in riser of steps, skirting , dado and pillarover and including15mm thick cement mortar (1:4) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed. |
| 25 | Supply and fixed for vitrified floor tiles 10mm thick (square/rectangular) in flooring , area of each tile not exceeding 0.36sqm set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour over 15mm thick screed bedding in cement sand mortar (1:6) complete in all respect as specified and directed. |
| 26 | Supply and fixed for vitrified floor tiles 10mm thick (square/rectangular) inskirting, area of each tile not exceeding 0.36sqm set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour over 10mm thick backing coat in cement sand mortar (1:6) complete in all respect as specified and directed. |
| 27 | M&L for full brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6m radius built in cement mortar 1:6 complete all as specified and directed. |
| 28 | M&L for half brick work with sub class old size \"B\" bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed. |
| 29 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed. |
| 30 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed. |
| 31 | M & Lfor 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar(1:4) finished even and smooth without using extra cement complete in all respect as specifified and directed. |
| 32 | M & L for15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:6) finished even and smooth without using extra cement complete in all respect as specifified and directed. |
| 33 | M & L for 10mm thick plastering on brick/stone/concrete surafces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete in all respect as specifified and directed. |
| 34 | Supply only water proofing compound complete in all respect as specifified and directed. |
| 35 | M & L for Broken stone orboulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed |
| 36 | S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165complete in all respect as specifified and directed. |
| 37 | Supplied and fixed pressed steel frames of size 165 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 38 | S&F 30mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed. |
| 39 | S&F 35mm thick second class HW glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc.; sizes of members of shuttrs as specified in SSR Part-I, section 8, clause 8.24 (a), complete in all respect as specified and directed. |
| 40 | S&F 100 mm size of mild steel butt hinges ISI marked, complete in all respect as specified and directed. |
| 41 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 42 | S&F Aluminium handle cast type anodised 125 mm, complete in all respect as specified and directed. |
| 43 | S&F aluminium anodised sliding door bolts with hasp and staple (boilt type) 16 mm dia bolt, 250 mm long, with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate, complete in all respect as specified and directed |
| 44 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed. |
| 45 | S&F PVC coloured insulated over MS pipe 20 mm dia curtain rod with fixing bracket, stops, rollers etc. complete all as specified and directed. |
| 46 | S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium \"U\" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 47 | S & F powder coated aluminium three tier window frame including necessary joining cleats, of Jindal section No 20832 or equivalent section of appd make of 1.5mm thick complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 48 | S & F powder coated aluminium window and ventilator shutters, side hung type with/without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No) grade), powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 49 | S & F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mmincluding necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 50 | S&F 75 mm size of butt hinges stainless steel, complete in all respect as specified and directed. |
| 51 | S & F 4mm sheet glass, ordinary quality and glazing with oil putty(if required) in square n. exc 0.5 Sqm in each pane complete in all respect as specifified and directed. |
| 52 | S & F 5.5mm sheet glass, ordinary quality and glazing with oil putty(if required) in square n. exc 0.5 Sqm in each pane complete in all respect as specifified and directed. |
| 53 | S&F stainless steel wire cloth,0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed. |
| 54 | M & L for writing letters or figures (block roman, Italic or Indian) through synthetic enamel paintof 30cm high upto 12m height building over square or round base painting and necessary scafolding arrangement complete in all respect as specified and directed. |
| 55 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over a coat of 1mm thick Plaster of Paris to inhance the plaster surface even and smooth and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed. |
| 56 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers), wall care putty, complete in all respect as specified and directed. |
| 57 | Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) or of similar work, etc. including necessary form workcomplete in all respect as specifified and directed. |
| 58 | Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat ofred oxideprimercomplete in all respect as specified and directed. |
| 59 | S & F of polythene film black 150micron complete all as directed |
| 60 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete in all respect as specified and directed.Sample as approved by GE. |
| 61 | M & L for pre polished chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurryas in path with grey cement and pigments over and including 20 mm thick screed bed in CM 1:4 complete all as directed. |
| 62 | Excavation in post holes (or similar holes) eachnot exc. 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc. 50 mtr in soft/loose soil complete in all respect as specified and directed. |
| 63 | M&L mild steel round bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia(Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete in all respect as specified and directed. |
| 64 | S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail s straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staple or steel pins etc. complete in all respect as specified and directed. |
| 65 | S&F for chain link fencing MS galvanized 3.4mm dia 100mmX 100mm mesh fixed to RCC post including securing or tying with GI MS wire staples, ms section, bars etc. . complete all as specified and directed. |
| 66 | S&F mild steel screw bolts 11 to 15mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fittedwith washers and haxagonal or squareexe 5 cm and n exc 10 cm long complete in all respect as specified and directed. |
| 67 | M&L for Mild Steel angle posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe 290 ( Gde E-165) complete all as specified and directed. |
| 68 | M & L for Cement concrete 1:3:6 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concerete complete all as specified and directed. |
| 69 | Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat ofred oxideprimercomplete in all respect as specified and directed. |
| 70 | M & L Preparation of New or previously untreated steel and ironSurfaces of any description, Two coat of BlacK Japanpaint over one coat of Redoxide over10cm in width or girth,not otherwise described coplete all as specified and directed. |
| 71 | Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described,n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat ofred oxideprimercomplete in all respect as specified and directed. |
