Tender For Special Repair And Maintenance Work At Churhat Sidhi M.P; 1 15.27 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Cum 162.08 914.30 148188.35 2 14.88 Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). Sqm 1346.63 855.70 1152311.29 Total : 1300499.64 0.00 13.00 0.00 B. Repairs to Toilets 3 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 270.00 73.40 19818.00 4 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 261.19 1267.95 331175.86 5 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm 99.32 1096.55 108903.86 6 22.30 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). sqm 104.09 769.60 80104.43 7 MR Supply and filling od Cinder in sunkan portion of toilet area including ramming etc including all labour and T&P etc complete as per direction of Engineer-in-charge. Cum 12.17 2183.04 26574.27 8 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Each 10.00 112.05 1120.50 9 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 10.00 6767.40 67674.00 10 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 5.00 1879.20 9396.00 11 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2.1 32 mm dia Each 5.00 119.55 597.75 17.28.2.2 40 mm dia Each 5.00 119.55 597.75 12 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Each 8.00 1648.95 13191.60 13 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15.44.1 15 mm to 40 mm nominal bore Mtr 185.00 149.80 27713.00 14 15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 15.45.1 Up to 150 mm diameter Mtr 157.00 332.40 52186.80 15 MR Providing and fixing uPVC class- B(IS:13592) trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S trap). 110 mm inlet and 110 mm out let Each 10.00 802.00 8020.00 16 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III)- IS:4985 inlet fitting approximately upto 300mm long above the trap with one or more 40 OD/ 50OD/63 OD/75OD holes for jointing waste pipes from waste appliances jointed and sealed with epoxy based sealant complete. Each 10.00 812.35 8123.50 17 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings(door or plain) viz elbolws, bends, tees, junctions, shoe bends, couplers, offsets, cowel etc. complete including jointing with solvent cement including GI supports, cutting and making good the walls wherever required. Nothing extra will be paid for supports.(Vertical Soil, waste, balcony waste & rain water pipes) 75 mm outer dia Meter 50.00 412.55 20627.50 110 mm outer dia Meter 200.00 615.56 123112.00 18 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B., Sink, floor drains etc. 40 mm outer dia Metre 25.00 90.46 2261.50 75 mm outer dia Metre 15.00 522.60 7839.00 19 MR Providing and fixing floor drain (FD) with 75mm outlet and 100 mm inlet with PTMT grating having 19mm seal for indirect floor drain (FD). Each 10.00 232.16 2321.60 20 MR Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali. Each 10.00 1045.00 10450.00 21 18.80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes Mtr 65.00 497.80 32357.00 18.8.2 20 mm nominal dia Pipes Mtr 45.00 537.60 24192.00 18.8.3 25 mm nominal dia Pipes Mtr 35.00 627.25 21953.75 18.8.4 32 mm nominal dia Pipes Mtr 40.00 739.30 29572.00 22 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.1.1 15 mm nominal bore Each 15.00 85.00 1275.00 23 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2.1 15 mm nominal bore Each 15.00 97.75 1466.25 24 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore Each 12.00 506.80 6081.60 25 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore Each 4.00 798.95 3195.80 26 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.3 25 mm nominal bore Each 5.00 464.05 2320.25 27 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore Each 8.00 622.40 4979.20 18.17.2 32 mm nominal bore. Each 6.00 689.60 4137.60 28 18.16 Providing and fixing brass stop cock of approved quality : 18.16.1 15mm nominal bore Each 10.00 353.25 3532.50 ..... more in document
