Tender For School Renovation 1 Work Under Sius2025-26 Vathalagundublock - Tn-05-03, Dindigul-Tamil Nadu

Tender For School Renovation 1 Work under SIUS2025-26 VathalagunduBlock - TN-05-03 -- 1 1. Renovation of PUM SchoolSouth Face RCC Building at Veriyappanaickenpatti H/O EluvanampattiEstimate Amount Rs.7.95 Lakhs 2 Removing and clearing the Damaged Pressed tiles and Weathering Course including all cost and conveyance of all materials and all labour charges etc complete (w-0037) 3 Finishing the top of roof with one course of 30% new tiles machine pressed tiles using new tiles including cost and conveyance of all materials and all labour charges etc.., complete 4 Weathering course concrete using best quality of broken jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC Roof slab in the proportion of brick jelly to lime being 32:12:1/2 by volume includingcost and conveyance of all materials to site and all labour charges etc.,complete 5 Chipping the old damaged Granolithic flooring siurface including all cost and conveyance of all materials and all labour charges etc.., completeW-0036 6 Providing Granolithick pattern floor finish with C.C.1:2:4 mix using 10 to 12mm ISS metal includingcost and conveyance of all materials to site and all labour charges etc.,complete . 7 Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc.,complete for 10 m3 8 Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc.,complete for 10 m3 9 Removing and clearing the damaged plastering surface including cost and conveyance of all materials to site and all labour charges etc complete 10 Plastering in cm 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete 11 Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. 12 Removing and clearing the damaged Chipping concrete and roughening the surfaceincluding cost and conveyance of all materials to site and all labour charges etc complete 13 Plastering in cm 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc complete 14 Oil bound distempering two coats including cost and conveyance of all materials and all labours charges etc.., complete 15 Exterior Emulsion two coats including cost and conveyance of all materials and all labours charges etc.., complete 16 Provision for BALA Painting arrangements 17 Painting two coats with Ready mixed enamel paint over old Steel doors and windows including cost and conveyance of all materials and all labour charges etc.., complete 18 Painting two coats with Block board painting over the old surface using good quality and approved colour paint including cost and conveyance of all materials to site and all labour charges etc complete 19 Provision for Doors and WindowsRepairs Charges (14 NOS) 20 Provision for Electrification arrangements 21 Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealedPVC light/ fan point (SD No.25) 22 Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathedSC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealedPVC plug point (SD No.38) 5 pin plug point 23 Supply and fixing of4-18WLED tube with fitting inclusive of all charges 24 supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106 25 Provision forcost of Name board charges 26 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}

INR 7950 /-

INR 7.95 Lakhs /-