}

Tender For Plasmodium Culture Room On 2Nd Floor, Delhi-Delhi

International Centre for Genetic Engineering and Biotechnology has published Tender For Plasmodium Culture Room On 2Nd Floor. Submission Date for this Tender is 14-07-2025. Building Work Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

49894778
Tender For Plasmodium Culture Room On 2Nd Floor
Tender
Indian
Delhi
Delhi
14-07-2025

Tender Documents

Tender Details

Tender For Plasmodium Culture Room On 2Nd Floor Working Bench Table with openable doors and drawers should Comprising of the following Items: galvanized (Zinc coated) GI Sheet. Arrangement for opening Cabinets in the entire length of the table with 18mm thick granite top fixed with table. Removable panels for maintenance for Respective entire Length of Table. Slide table Electrical/Gas Service channel with removable/ interchangeable cassette panels. Mini Vertical service channel connector enabling concealed wire management from below the table to the electrical service channel. Of G.I sheet extruded Verticals of 2000mm Height or as per site condition. Providing fittings like door lock , handle, telescopic channel, hinges Complete with necessary fitting Make: TATA/ JSW a Length -3048 mm ,Depth - 609 (mm) , Height - 915 (mm) 1 Job 2 PVC Flooring- Flooring with PVC Vinyl floor sheet 2 mm thick fixing with skirting 4synthetic resine adhesive in correct position after preparing the floor, levelling smoothening etc. Complete. Make: Wonder Floor, RMG. 50 Sqmt 3 SITC of double skin clean powder coated G.I Sheet, PUF infilled room ceiling system 50 mm thick, including necessary utility cut- outs duly concealed complete with necessary arrangement. Make: GMP, Fabtech, Synergy 15 Sqmt 4 SITC of double skin clean powder coated G.I Sheet, PUF infilled for door material size (36x7’) system 50 mm thick, including necessary utility cut- outs duly concealed SS- D handle door closer hinges, push plate and kick plate along with 480x750 mm double gazing view pane and drop seal with necessary arrangement Make: GMP, Fabtech, Synergy. 1 Job 5 Dismantling item -PVC line dismantling and Providing water supply connection and PVC drain connection with one single lever mixture bottle trap for existing SS sink complete with necessary arrangement. Make: Hindware, Jaquar, Supreme, Prince Mineral fibre False Ceiling Providing and Fixing Mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance of 85%, Thermal Conductivity k =0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T- sections used in false ceiling support system shall be pre- painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge and also including the cost of making opening for light fittings, Fire Alarm, Fire Fighting Equipment, VRV Indoor Units etc. With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Make - Aerolite, Hilux 50 Sqmt 7 Supplying and Fixing of existing MS Bench with necessary fittings (Hinges, Cam lock, SS Handles) and enamel painting with two coat complete in all respect. Make: Godrej, Hettich, Berger, Asian. 1 Job Total - A (Civil) B ELECTRICAL ITEM 1 SITC of ceiling mount UV Light - 30W UVC Disinfection tube light 3 feet length with fitting wiring complete as required. UV light ON/OFF switch and UV indication lamp installed in entrance of the facility (UV Make; Philips/ Osram /Wire make ; Finolex,

Key Value

Document Fees
INR 1000 /-
EMD
Refer document
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail