Welcome Maint Of Md Accn At At Mil Station Kasauli Under Ge Kasauli; 2 Material and labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bond distemper of any approved tint complete all as specified. 3 Ditto- All as per Srl item No 1.00 above but two coats of oil bond distemper complete all as specified & as directed. 4 M &L for complete removal of existing treatment with sand paper or iron patti / flat and applying white cement based wall care putty on wall of Average thickness 2.00 mm using blade / spatula to prepare surfaces even and smooth complete all as specified and asdirected. 5 Material and labour for complete removal of existing treatment with sand paper or iron patti / flat preparation ofold painted wooden surfaces of any description and in any situation over 10 cm width or girth and applying one coat of synthetic enamel paint of tint as approved complete all as specified. 6 ditto-All as per Srl item No 04.00 above but two coats of synthetic enamel paint complete all as specified. 7 Material and labour for prepartion of old painted steel surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified & as directed (except roof). 8 All as per item No 6.00 above but two coat of synthetic enamel paint complete all as specified and directed 9 Material and labour for disconnecting existing over head steel/PVC water tanks, setting aside (or lowering, if required) for repairs, cleaning etc and hosting if required, reconnecting and refixing in position including cleaning and removing all scale and dirt etc, from tanks and from mouth of circulating pipes etc capacity exc. 250 ltrs & not exc. 500ltrscomplete all as specified & as directed by Engr-in Charge. 10 All as per Srl item No 8.00 abovebut exc 500 ltrs and n.ext 1000 ltrs capacity complete all as specified. 11 Material and labour for rotational moulded polyethylene water storage tanks 500 Ltrcapacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.including Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed. 12 Material and labour for rotational moulded polyethylene water storage tanks1000 Ltrcapacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.including Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed. 13 Material and labour for Rendering 15mm thickin cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed, including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. 14 Material and labour for preparation ofnew plasteredsurface and applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer. 15 Material and labour for french polishing on surfaces of any description,over10cm width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats to arrive glossy finish complete all as specified & directed. 16 Supply and fixing inrepair brass CP Wall/WHB/Sink mixer,for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. 17 Supply and fixing of 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both sides with decorative choicefixed with screws to timber frame-work, including Dismantling boarding, any description, fixed any position with nails complete all as specified and directed. 18 Material and labour for piano hinges mild steel bright finish width of flap 40mm fixed in repairs including taking out the existing complete all as specified and directed. 19 Material and labour for hasp and staple 75mm size, safety type aluminium anodised including bolt to hinge plate and fixed in repairs to cup board shutter or kitchen cabinet shutters including taking out the existing complete all as specified and directed. 20 Supply and fixingin repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm making good wall by painted or distempered finish to match existing complete all as specified and directed. 21 Supply and fixingin repairs 40mm brass C.P coupling for kithen SINK complete all as specified and directed. 22 Supply and fixingas in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed . 23 Supply and fixing in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coatedwith fixing metal ornamental holder and side finals(in pair for Each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified. 24 Supply and fixing in repair PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 ltr. Capacity complete all as specified & directed. 25 Supply and fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and as directed. 26 Supply and fixing in repair of Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),including plastic water closet seat, black, closed pattern with flat bottom and seat cover, and mild steel chromium plated or aluminised/ hinging device complete all as specified in repair. 27 Supply and fixing in repair of Vitreous china squatting pan, Orissa pattern of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified 28 Supply and fixing 15mm bore PVC connection with brass nut of length 450mm fixed as in repairs including taking out the existing unserviceable complete all as specified and as directed. 29 Supply and fixing 15mm bore Bib taps, chromiumplated cast copper alloy, fency type with crutch or butter fly handle, screwed down for iron pipe or for brass ferrule fixed as in repairs including taking out the existing unserviceable brass tap complete all as specified and directed. 30 Supply & fixing 15mm bore stop valve, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union fixedas in repair including taking out the existing stop valve complete all as specified and directed. 31 Taking up or down 15 mm dia GI steeltubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 32 Taking up or down 20 mm dia GI steeltubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 33 Supply and fixing for 15 mm bore GI tubing, medium grade with all fittings, fixedto walls, ceiling or laid in floors complete all as specified and as directed. 34 All as per item No. 32.00 here-in-before but 20mm bore -do- 35 Taking down chowkats or frames without taking down shutters from the frameexc. 1.5 sq. m but n.exc.4 sqmEach complete all as specified. 36 Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. mEach complete all as specified. 37 Material and labour 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. 38 Supply and fixing 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both side cover with veneer decorative on both side complete all as specified. 39 Supply and fixing Factory made solid PVC frame of size50 mm x 47 mm made out of 5 mm plain colourPVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specificaiton and drawing. 40 Material and labour for factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fot top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either siude & as gap insert for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 41 Supply and fixing anodised aluminium powdercoated(thickness of powder coating not less than 50 micron)three track sliding window/Cupboard frame of size 45.2 x 35 x 1.3mm and window/Cupboardshutter of size 37.5 x 15 x 1.6mm with one or more rebates including joining cleat for fixing and self locking devices of approved quality in Each shutter, handles etc complete all as specified and directed. (Note: quoted rate deemed to be included for self locking devices) 42 Supply and fixing anodised aluminium powder coated(Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately ) 43 Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified 44 Supply and fixing Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. 45 Supply and fixing in repair Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed 46 Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified 47 Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed . 48 Supply and fixing sheet glass 5.5 mm thick glass plain sheet ordinary quality in squareexc 0.5 sq. m in Each pane to be fixed in aluminum frame all as specified. 49 Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed. 50 Supply and fixing for butt hinge ISI Marked 75mm size, medium weight, cold rolled stainless steel complete all as specified and as directed. 51 Supply and fixing 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified & directed. 52 Supply and fixing 200mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.complete all as specified and directed. 53 Supply and fixing 150mm long extrudded brass handles, Fabricated type, polished complete all as specified. 54 Supply and fixing Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor 55 Supply and fixing 300mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair including taking down the unserviceable existing complete all as directed. 56 Supply and fixing 200mm MS tower bolts of stove enamelled black fixed as in repair including taking down the unserviceable existing tower bolt complete all directed. 57 Material and labour for preparation of new wooden surfaces of any description over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 58 Supply and fixing coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm thick rendering in CM 1:3, complete all as specified, including dismantling existing wall tiling including cement mortar bedding (but not backing) 59 Material and labourNon-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of Each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4complete all as specified and as directed, including dismantling floor tiling including cement mortar bedding (but not backing) 60 Material and labour Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed,including dismantling floor tiling including cement mortar bedding (but not backing) 61 Supply and fixed 18-20 mm thick Graniteof any shade( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and likein cement mortor 1:4including pointing in whitecement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed, including, dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) 62 Supply and fixing in repair of sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in Each pane complete all as specified and as directed by the Engineer-in-Charge 63 Supply and fixing in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed . 64 Supply and fixing in repair Plywood 6mm thick, grade BWR, type BB, fixed with screws to timber frame work in ceiling including dismantling wall/ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/kitchen cup board, any thickness, including cover fillets complete all as specified and as directed . 65 Material and labour for Plain fillets 2nd class hard wood exe 13 sqcm and not exe. 25 sqcmsquare, rectangular or triangular in section, clean sawn, secured with nails or bradsfixed in repair including dismantling timber scantlings 40 sqcm and under in section, in ceiling complete all as specified and directed. 66 Material and labour for Plain fillets 2nd class hard wood exe 6 sqcm and not exe. 13 sqcmsquare, rectangular or triangular in section, clean sawn, secured with nails or bradsfixed in repair complete all as specified and directed. 67 Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified 68 Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified, including Dismentling Plain or corrugated steel sheeting, any gauge,thickness and any pattern. 69 Supply and fixing for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified , including Dismentling Plainsteel sheeting, any gauge,thickness and any pattern. 70 Supply and fixing for Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed, including Dismentling corrugated steel sheeting, any gauge,thickness and any pattern. 71 Supply and fixing for Galvanised,0.63 mm thick corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws as specified, including Dismentling Plain or corrugated steel sheeting, any gauge,thickness and any pattern. 72 Supply and fixing plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing fixed with self tapping screws as specified , including Dismentling Plainsteel sheeting, any gauge,thickness and any pattern. complete all as specified and directed 73 Material and labour in repairs for PVC tiles / sheets1.5 mm thick laminated plaincoloured, marbled mosaic or motled finish, laid with approved rubber based adhesive in floors incl taking down old sheet all as specified. 74 Taking down carefully any type of battens or conduit point wiringwith or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, fan regulators etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer-in-Charge. 75 Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSHPVC insulated, unsheathed copper conductor cable in and including PVC casing -n-caping of any size/dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :- 76 One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 77 One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 78 One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed. 79 One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed. 80 One two way point controlled by two, two way switches 06 Amps complete all as specified and directed. 81 All as per serial item No 74.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed. 82 Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSHPVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :- 83 One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed. 84 One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed. 85 One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed. 86 All as per serial item No 76.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable forone 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed. 87 Supply & fixing switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 88 Supply & fixing switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 89 Supply & fixing of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge 90 Supply & fixing of socket outlet 3 pin, 06 Amps 240 volts complete all as specified & directed by Engr-in-Charge 91 Supply & fixing in replacement of switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 92 Supply & fixing in replacement of switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 93 Supply & fixing in replacement of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge 94 Supply & fixing in replacement of socket outlet 3 pin, 06 Amps 240 volts complete all as specified & directed by Engr-in-Charge 95 Supply and fixing bell push flush type , 06 amps , 240 volts complete all as specified & directed by Engr-in-Charge . 96 Supply and fixing in repalcement door bell ding dong type , 240 volts AC complete all as specified & directed by Engr-in-Charge 97 Supply & fixing switch piano flush type, 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge 98 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge 99 Supply & fixing in repair/replacement LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 100 Supply and fixing in repair/replacement of 9/10 W LED bulk head luminairies incl LED light with clear prismatic diffuser,driver holder connecting up with three core flexible copper conductor cable of suitable sizeincluding all acessories for fixing on wall all as specified and directed by Engr-in-Charge. 101 Supply and fixing in repair/replacement wall mounted decorative fancy light fitting with double glass and brass base as per existing sample or as approved by Engg-in-Charge suitable for inbuilt/separate 14 watts LED lamp including two number LED lamp 14 watt of coolday/warm white of base E-14/E-27/B-22, fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge. 102 Supply and fixing in repair/replacement wall mounted decorative fancy light fitting with double glass and brass base as per existing sample or as approved by Engg-in-Charge suitable for inbuilt/separate 14 watts LED lamp including two number LED lamp 14 watt of coolday/warm white of base E-14/E-27/B-22, fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge. 103 Supply and fixing in repair/replacement decorataive bed side light fitting flush to wall mounted as per existing sample or as approved by Engg-in-Charge of coolday/warm white, fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge. 104 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. 105 Supply & fixing in repair/replacement of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. 106 Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge. 107 Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 2.5 Sqmm for earth wire), FRLSH, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. 108 -Ditto- all as per item No 98.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as specified & directed. 109 Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. 110 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. 111 -Ditto- all as per item No 101.00, but of size 08 way SPN. 112 -Ditto- all as per item No 101.00, but of size 12 way SPN. 113 Supply and fixing in repairs MCB, SP, AC, 240 volts B series capacity of 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified & directed. 114 Supply and fixing in repairs MCB, DP (Double Pole), AC, 240 volts, B series capacity 20 Amps to 32 Amps10kA and making connections with suitable thimble complete all as specified & directed. 115 Supply and fixing in repairsMCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps10kA and making connections with suitable thimble complete all as specified & directed. 116 Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole 100 Amp isolator and MCBs of cap 20 to 40 Amps as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. 117 Supply and fixing in repairs Isolator 4 Pole B series 100 amps capacity AC 415 V,10kA complete all as specified and directed. 118 Supply and fixing in repairs Isolator 4 Pole B series 63 amps capacity AC 415 V,10kA complete all as specified and directed. 119 Material and labour for taking down the unsv geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and descalling the deposits in the inner container and outlet water pipe set complete all as directed by Engineer-in-Charge. (Note:- Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. Material & labour for GI fittings and other connected works shall be measured and paid for separately under respective items of schedule ‘A’ here in after) :- 120 Supply & fix in repair of thermostatic switch 11 long ISI marked complete with electric connection suitable for geyserany Make complete all as specified and directed. 121 Supply & fix in repair ofgeyser element 1.5 /2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) completeall as specified and directed. 122 Supply and fix in replacement Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as directed by Engineer-in-Charge. 123 Supply & fix (in repairs) 15mm dia PVCconnection 450 mm long , suitable for hot water supply ,complete with 2 Nosbrass nuts complete all as specified and directed. 124 Supply & fix (in repairs) 15mm dia PVCconnection 450 mm long , suitable for cold water supply ,complete with 2 Nosbrass nuts complete all as specified and directed. 125 Supply & fix (in repairs) 15mm dia 304 grade stainless steel connection pipe 450 mm long , suitable for hot & cold water supply ,complete with 2 Nosbrass nuts complete all as specified and directed. 126 Supply & fix (in repairs) 15mm dia 304 grade stainless steel connection pipe 900 mm long , suitable for hot & cold water supply ,complete with 2 Nosbrass nuts complete all as specified and directed. 127 Supply & fix in repairs of Zebra fastner of size 12x100 mm complete all as specified and directed . 128 Supply and fixing in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed 129 Supply and fixing in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed. 130 Supply & fixing in repair/replacement to existing tube light fitting of any capacity with LED tube light fitting 20W, (single Side Connection) with rechargeable emergency invertor LED batten including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 131 Supply & fix repair/replacement to existing LED tube light batten fitting 20W, (single Side Connection) including LED Rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 132 Supply and fixing in repair/replacementof PVCgang box two way suitable for 6 Amp Socket and 6 Amp switch complete all as per specified and directed 133 All as per Srl Item no 123.00 but PVC Gang Box of three way. 134 All as per Srl Item no 123.00 but PVC Gang Box of four way. 135 All as per Srl Item no 123.00 but PVC Gang Box of six way. 136 Supply and fixing in replacementof PVCgang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specified and directed 137 Supply and fixing in replacement PVC Plug Top 16 amps complete all as specified and as directed. 138 Supply and fixing 1100 volts grade heavy dutyflat twin core cable PVC insulated with stranded aluminium conductor of size 10.0 sqmm and overall PVC sheathedin service/bldg security light connectionsfrom OH conductor to building incl dismantling taking down unserviceable one all as specified and directed. 139 All as per item No. 129.00 here-in-before but 6.0 Sqmm complete all as specified and directed. 140 Supply and fixing in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. 141 Supply and fixing in repair/replacementof PVC corrugated Flexible pipe of dia 15mm, grey/white in colour as per site requirement complete all as per specified and directed 142 Supply and fixing in repair/replacementof PVC corrugated Flexible pipe of dia 20mm, grey/white in colour as per site requirement complete all as per specified and directed 143 Supply and fix in repair/replacement modular socket 16 A, 6 pin,complete all as specified & directed by Engr-in-Charge 144 Supply and fix in repair/replacement modular socket 03 pin 06 A, complete all as specified & directed by Engr-in-Charge 145 Supply and fix in repair/replacement modular switch 16 A, complete all as specified & directed by Engr-in-Charge 146 Supply and fix in repair/replacement modular switch 06 A, complete all as specified & directed by Engr-in-Charge 147 Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50 m below notmal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1,precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20 mm bore with funnel wire mesh and medium grade GI wire protection pipe 15 mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe (light grade) for watering 15mm GI protection pipe (medium grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made. 148 Amount of credit of Rs. 181301.00 for retrived old material as mentioned in Schedule A section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
