Tender For Certain Repair Works At Icgs Ratnagiri; 1 Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. 2 Material & Labour for Machine cut Laterite stone masonry as block-in-course masonry well bonded exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. 3 Material & Labour rendering 15mm thick in Cement Mortar 1:4 on surfaces other than fair face of stone masonry work finished even and smooth using sagol finish complete all as specified and as directed. 4 Taking down cement plaster any description from walls/ceiling including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed. 5 Material & Labour for rendering 15mm thick plaster in Cement Mortar (1:4) on stone or concrete surfaces finished even & smooth complete all as specified and as directed. 6 Material & Labour for rendering 15mm thick plaster in Cement Mortar (1:6) on stone or concrete surfaces finished even & smooth complete all as specified and as directed. 7 Material & Labour for rendering 10 mm thick in Cement Mortar (1:3) on ceiling, complete all as specified and as directed. 8 Material & Labour for two coats of oil bound distemper over and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth surfaces, oil bound distemper over a coat of primer on newly plastered surface using roller only as per manufacturers instruction, complete all as specified and as directed. 9 Material & Labour for three coats of white wash on newly plastered surface of wall including preparation of surface, complete all as specified and as directed. 10 Material & Labour for three coats of white wash on newly plastered surface on ceiling, complete all as specified and as directed. 11 Material & Labour for preparation of newly plastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed. 12 Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in cover slabs (for man holes, septic tank, soak well etc.) complete all specified and as directed. 13 Material & Labour for slabs supported on walls, beams and columns in floors, roofs, kitchen slabs, balconies, canopies made in RCC nominal mix 1:2:4 type B1 using 20mm graded aggregate all as specified and as directed 14 Material & Labour for MS bars (TMT) 10mm dia and over cut to length bent to shape required, including cranking binding spirally for hooking for columns and binding with and including mild steel wire (Annealed) not less than 0.9mm dia as in reinforcement complete all as specified as directed. 15 Material & Labour Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed. 16 Material & Labour Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exceeding 5 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 5 cm but not exceeding 10 cm wide complete all as specified and as directed 17 Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed. 18 Material & Labour for 18 to 20 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over bedding in Cement Mortar(1:4) 10 thick and pointed in white or colour cement with ad mixer of pigment to match with shade of granite stone including grinding and polishing complete all as specified and as directed. 19 Demolition of cement concrete in ground floor and paving’s not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. 20 Material & Labour 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) on floor as sub base or roof surface to bring uniform surfaces complete all as specified and directed 21 Material & Labour for nonskid ceramic-coloured tiles 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc. and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified and directed 22 Material & Labour nonskid ceramic-coloured tiles 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, on dado / skirting etc. and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 10mm thick backing layer in Cement Mortar (1:4) complete all as specified and directed. 23 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed. 24 Supply & fix glazed ceramic-coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including cutting to required shape and size over and including 10mm thick plaster in Cement Mortar (1:4) on vertical surfaces as backing coat complete all as specified and directed. 25 Material & Labour for 75 mm thick PCC 1:2:4 type B2 (using 40mm graded aggregate) as in path/hard standing, finished with smooth even surface complete all as specified and directed. 26 Material & Labour for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded aggregate) plinth protection and similar work surface even and fair without using extra cement complete all as specified and directed. 27 Taking down Chowkhats or frames with shutters without taking off shutters from the frames not exceeding 1.5 Sqm each, complete all as specified and as directed. 28 Taking down Chowkhats or frames with shutters without taking off shutters from the frames exceeding 1.5 Sqm and not exceeding 4.0 sqm each complete all as specified and as directed. 29 Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified and as directed. 30 Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.00 sqm each complete all as specified and as directed. 31 Supply & fix second class hard wood Plain, solid, straight Chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. 32 Material & Labour for treating the back side of Chowkhats Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth applying Black bituminous paint complete all as specified and as directed 33 Supply & Fix 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, gauze etc., size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using Second Class Hard wood complete all as specified and as directed. 34 Supply & Fix 30mm thick Glazed skeleton shutters for window, ventilator etc. are provided with stiles and rails, open rebated and prepared to receive glass, Gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mired beads for securing glass, gauze etc., size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (b)., using second Class Hard wood complete all as specified and as directed. 35 Supply & Fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 36 Supply & Fix for 35mm thick, second-class hard wood, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 37 Refixing shutter of same opening any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed. 38 Supply & Fix Galvanised mild steel wire cloth, 0.63mm nominal diameter of wire and average width of aperture 1.40mm and fixed with tinned tacks or Galvanised wire staples complete all as specified and as directed. 39 Supply & Fix in repair Galvanised mild steel wire cloth, 0.63mm nominal diameter of wire and average width of aperture 1.40mm and fixed with tinned tacks or Galvanised wire staples complete all as specified and as directed. 40 Supply & Fix in 3mm thick plain glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. 41 Supply & Fix in repair 3mm thick plain glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out all as specified and directed 42 Supply & Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. 43 Supply & Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site all as specified and directed. 44 Material & Labour for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed 45 Supply & Fix framed work such as grills, gratings, gates etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc. confirming to Fe-290-Grade-E-165 complete all as specified and as directed. 46 Material & Labour for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed. 47 Supply & Fix 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. 48 Supply & Fix in repairs for 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. 49 Supply & Fix for 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. 50 Supply & Fix in repairs for 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. 51 Supply & Fix 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. 52 Supply & Fix in repair 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. 53 Supply & Fix 100mm long anodised aluminium handles, cast type, complete all as specified and as directed. 54 Supply & Fix in repairs 100mm long anodised aluminium handles, cast type, complete all as specified and as directed. 55 Supply & Fix for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed. 56 Supply & Fix in repairs for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed. 57 Supply & Fix butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed. 58 Supply & Fix in repairs for butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed 59 Supply & Fix butt hinges, 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed. 60 Supply & Fix in repairs butt hinges, 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed. 61 Supply & Fix 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and directed. 62 Supply & Fix in repair 600 x 450 mm and 5.5 mm thick glass beveled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial ply wood and fixed wooden plugs with CP brass screws and cup washers complete all as specified and directed. 63 Supply & Fix 15 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc, complete including taking down all as specified and as directed. 64 Supply & Fix 20 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc, complete including taking down all as specified and as directed. 65 Cutting chases pinning in, making good to facing where required & pointing in Cement Mortar 1:3 for concealed water tubing not exceeding 10cm girth in brick wall, complete all as specified and as directed. 66 Supply & Fix in repair vitreous China wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated including waste coupling fittings and PVC waste pipe complete all as specified and as directed. 67 Supply & Fix in repairs ISI marked 15mm bore, chromium plated bib tap long body fancy type of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 68 Supply & Fix in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. 69 Supply & Fix in repairs 15 mm dia bore fancy type pillar tap, cast copper alloy chromium plated screwed down high pressure with or without lettered Hot or Cold with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed. 70 Supply & Fix in repair 32 mm CP Waste coupling for Sink/WHB complete all as specified and as directed 71 Supply & Fix in repair brass chromium plated overhead shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed. 72 Supply & Fix in repair Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) complete all as specified and as directed. 73 Supply & Fix in repairs vitreous China wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts including PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed. 74 Supply & Fix in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets., flush pipe of polyethylene of low or high density or PVC 32mm dia for low level flushing cistern, PVC connection 450 mm long complete all as directed. 75 Supply & Fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. 76 Supply & Fix in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed 77 Supply & Fix in repair CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug in wall, complete all as specified and as directed. 78 Supply & Fix in repair sheet glass shelf consisting of 5.5mm thick sheet glass self-assembly 12cm width with chromium plated guard and railing 60cm long, complete all as specified and as directed. 79 Supply & Fix in repair rotational moulded PVC water tanks cylindrical with closed top hoisted and fixed in position of 500 Litre capacity including dismantling existing tank complete all as specified and directed. 80 Supply & Fix repair rotational moulded PVC water tanks cylindrical with closed top hoisted and fixed in position of 1000 Litre capacity including dismantling existing tank complete all as specified and as directed. 81 Supply & Fix 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe, complete all as specified and as directed. 82 Supply & Fix in repair PVC (SWR) pipe 110 mm dia, conforming to IS:13592-1992 type B, single socketed in any length with rubber ring joint fixed to walls with clamp including taking down old one complete all as specified and directed. 83 Supply & Fix in repair PVC (SWR) pipe 75 mm dia, conforming to IS:13592-1992 type B, single socketed in any length with rubber ring joint fixed to walls with clamp taking down old one complete all as specified and directed. 84 Supply & Fix in repair PVC (SWR) bend any radius, 110 mm dia complete all as specified and directed. 85 Supply & Fix in repair PVC (SWR) junction single T equal with access door 110 mm dia complete all as specified and directed. 86 Supply & Fix in repairs low density polyethylene (LDPE) pipe 50mm bore of pressure rating 6 Kg/Sqcm, complete all as specified and as directed. 87 Material & Labour for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping including necessary form work etc. complete all as specified and directed 88 Material & Labour for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base for path/hard standing, complete all as specified and as directed. 89 Supply & Fix in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. 90 Supply & Fix in repairs chromium plated health faucet 8mm dia 1-metre-longChromium plated flexible tube with wall hook and set suitable for 15 mm bore pipe or for union and fixed complete all as specified and as directed. 91 Amount of credit Schedule shall be deducted to arrive Contract Sum
