Tender For Supply Of Hardware, Tools And Tackles, Nut-Bolts, Cast Steel, Butterfly Valve And Rubber Goods Etc. , Supply Of Hardware , Cotton Waste (White) , Cotton Waste (Coloured) , Emery Cloth Rough(Carborundum Universal Make) , Emery Cloth Fine(Carboru, Azamgarh-Uttar Pradesh

TDR : 49890605

Tender Notice
BOQ

Expired

Azamgarh , Uttar Pradesh

Tender Brief : Tender For Supply Of Hardware, Tools And Tackles, Nut-Bolts, Cast Steel, Butterfly Valve And Rubber Goods Etc. , Supply Of Hardware , Cotton Waste (White) , Cotton Waste (Coloured) , Emery Cloth Rough(Carborundum Universal Make) , Emery Cloth Fine(Carboru

Document Fees
₹ 590 /-

EMD
₹ 20000.0 /-

Tender Value
Refer document

Submission Date
04-07-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supply of Hardware
2	Cotton waste (White)
3	Cotton waste (Coloured)
4	Emery cloth Rough(Carborundum Universal make)
5	Emery cloth Fine(Carborundum Universal make)
6	Helmets- Plastic fitted
7	S.S. PIPEID- 6MM, OD- 8MM
8	M.S. Tube ID-6 mm, OD- 8 mm
9	Rustoline 500 gram Tin
10	Low Alloy Hacksaw blades 1/2\" X 12\"
11	Hexaframesize 12\"
12	Bluetube 10 gm pack
13	Brasso 500 ml
14	Araldite 180g each
15	CRC26 (500 ml Pack)
16	Leatherised Paper05 mile
17	Leatherised Paper07 mile
18	Leatherised Paper10 mile
19	M.S. wire brush with handle (4 rows) size 4”
20	M.S. wire brush with handle (4 rows) size 6”
21	Lead wire 3mm dia
22	Leather Hand glove 18\"
23	Copper tube bender upto 3/8\" copper tube
24	M.S. \"U\" Clamp 1/2\"
25	M.S.‘U’ Clamp ¾”
26	Anabond 250 gm Pack
27	Wire rope clamp (5/8) inch
28	Wire rope clamp (1 inch)
29	Nylon Gray wire rope 1\"
30	Nylon Gray wire rope 1.5”
31	Center punch hardened steel 100 mm length
32	Center punch hardened steel 125 mm length
33	Center punch hardened steel 150 mm length
34	Ball Pen hammer 1/2 lbs
35	Ball Pen hammer 2 lbs
36	Sledge hammer 7 Kg
37	Vernier calliper 8\"make- Mitutoyo JAPAN
38	DialVernier calliper 12\"make- Mitutoyo JAPAN
39	Taper Drill socket (1, 2, 3, 4)
40	Divider 6\"
41	Divider 12\"
42	Loctite -406 (20 gm. Pack)
43	Readymade wire rope sling with both end loop 15T capacity X 6mtr long
44	Master level4\" size Mitutoyo make Japan
45	Master level6\" sizeMitutoyo make Japan
46	Filler gauge make- Mitutoyo JAPAN Metric size4\" long
47	Filler gauge make- Mitutoyo JAPAN Metric size6” long
48	Filler gauge make- Mitutoyo JAPAN Metric size3” long
49	Loctite -510 (200 gm. Pack)
50	Rubber Joint 1/8\"
51	RubberJoint 1/4\"
52	RubberJoint 1”
53	RubberJoint 2”
54	Emery cloth role (Black) each of 50 mtr (Carborendum make) 50 mm wide rough no. 60
55	Emery cloth role (Black) each of 50 mtr (Carborendum make) 100 mm wide rough no. 60
56	Emery cloth role (Black) each of 50 mtr (Carborendum make) 50 mm wide Smooth no. 120
57	Emery cloth role (Black) each of 50 mtr (Carborendum make) 100 mm wide Smooth no. 120
58	Emery cloth role (Black) each of 50 mtr (Carborendum make) 50 mm wide very fine no. 120
59	Valve grinding paste Carborendum make Rough 400 gram Pack
60	Valve grinding paste Carborendum make Smooth 400 gram Pack
61	Brass shims 300 mm wideX 1 mtr. long
62	Brass shims size 14\" x 48\" x 4 thou
63	Brass shimssize 14\" x 48\" x 6 thou
64	Brass shims size 14\" x 48\" x 8 thou
65	Brass shims size 14\" x 48\" x 0.25 mm
66	Brass shims size 14\" x 48\" x 0.50 mm
67	Brass shims size 14\" x 48\" x 1.0 mm
68	Piano wire 0.5 mm dia
69	Piano wire 1 mm dia
70	Hand shovels
71	Hand trolley which can handle 200 kg Wt. load (Multipurpose)
72	Teflon Tape ½” width Champion make
73	Teflon Tape ¾” width Champion make
74	Teflon Rod½”Champion make
75	Teflon Rod¾” Champion make
76	Teflon Rod 1” Champion make
77	Teflon Rod 40 mm Champion make
78	Teflon Rod50 mm Champion make
79	Teflon Rod 80 mm Champion make
80	Holdite Compound 100 gram (Pidilite)
81	Steam hose pipe 1/2\" bore (Dunlop Make) Three ply
82	Steam hose pipe 3/4\" bore (Dunlop Make) Three ply
83	Steam hose pipe 1\" bore (Dunlop Make) Three ply
84	20 mm NB ball valve S.S. Flowsid
85	M.S. Split pin Size 6 x 65 mm Champion make
86	M.S. Split pin Size 6 x 50 mm\" \"
87	M.S. Split pin Size 6 x 40 mm\" \"
88	M.S. Split pin Size 3 x 45 mm\" \"
89	S.S. Split Pin size 1/8\" x 3/4\"\" \"
90	S.S. Split Pin size 3/16\" x 2\" \" \"
91	Spring Washer champion make (All Size)
92	Reinforced Rubber Black Hose Pipe (ID=1\", OD=1-1/2\") Dunlop make
93	Acrylic fibre Transparent Sheetsize 6\" x 4\" x 8 mm thick
94	M.S. Flange size 3\"
95	M.S. flange size 4\"
96	M.S. Flange size6\"
97	M.S. Flange size 8\"
98	Alluminum Revet All size
99	Copper Revet All size
100	Copper washer All size
101	Manila Rope½”
102	Manila Rope ¾”
103	M.-Seal (Pedilit)
104	Graphite powder universal/Corborendom make
105	White lead Sakura
106	Red lead Devaldi make
107	Dial gauge indicator complete with Magnetic stand holder & Accessories 2\" dia (Mitutya Japan)
108	S.S.-304 Jali, Hole-5mm dia, 3 no. of holes in 1\", Length=1800mm, Width=610mm, Thickness=3 mm
109	Hand drilling machine (Pistol Drill) up to 16 mm make WOLF/ BOSS
110	Hand drill bit upto 16mm
111	Hydraulic Jack 05MT Best Make
112	Hydraulic Jack 10MT Best Make
113	Turn buckle 10 MT
114	Chain Block of Two way Chain with 15 mtr. lifting heavy duty make INDEF 2 MT Capacity
115	Chain Block of Two way Chain with 15 mtr. lifting heavy duty make INDEF 3 MT Capacity
116	Chain Block of Two way Chain with 15 mtr. lifting heavy duty make INDEF 5 MT Capacity
117	Chain Block of Two way Chain with 15 mtr. lifting heavy duty make INDEF 10 MT Capacity
118	Chain ratchet 0.5 T
119	Chain ratchet 1.0 T
120	Manila rope pulley suitable for 35 mm dia 3 way suitable for 2 MT heavy duty Swlite Make
121	Manila rope pulley suitable for 35 mm dia 2 way suitable for 2 MT heavy duty Swlite Make
122	Manila rope pulley suitable for 35 mm dia 1 way suitable for 1 MT heavy duty Swlite Make
123	One way free pulley suitable for 1MT
124	Flat File Rough J.K. make 12 Inch.
125	Flat File Fine J.K. make 12 Inch.
126	Round File Rough J.K. make 12 Inch.
127	Round File Fine J.K. make 12 Inch.
128	Safety Belts Nylon ARC Make
129	Readymade Nylon Rope slings with loops at both sides Leo Make 1 Ton Capacity 3 mtr length
130	Readymade Nylon Rope slings with loops at both sides Leo Make 2 Ton Capacity 3 mtr length
131	Readymade Nylon Rope slings with loops at both sides Leo Make 5 Ton Capacity 6 mtr length
132	Readymade Nylon Rope slings with loops at both sides Leo Make 10 Ton Capacity 6 mtr length
133	Wire rope Sling with Both end Loops Size 18 mm X 15 Mtr.
134	Wire rope Sling with Both end Loops Size 12 mm X 15 Mtr.
135	Measuring Tape Size 3 mtrs Plastika Fiber Make
136	Measuring Tape Size 5 mtrs Plastika Fiber Make
137	Measuring Tape Size 15 mtrs Plastika Fiber Make
138	Measuring Tape Size 30 mtrs Plastika Fiber Make
139	S.S. Scale 1 Feet Omega Make
140	S.S. Scale 1 Mtr. Omega Make
141	G.D.S. Input Spanner 01 Inch Drive Complete Set Bosh Make
142	Dial Indicator with Magnet Stand Mitutoyu Make Japan
143	Dial Micro Meter Mitutoyu Make Japan
144	Sprit Level 12 Inch Mitutoyu Make Japan
145	Inside Calliper 500 mm Mitutoyu Make Japan
146	Inside Calliper 12 Inch Mitutoyu Make Japan
147	Out Side Galliper 500 mm Mitutoyu Make Japan
148	Out Side Galliper 12 Inch Mitutoyu Make Japan
149	Divider 500 mm Mitutoyu Make Japan
150	Portable Industrial Blower Wolf Make
151	Portable Angle Grinder Bosh/Wolf Make 4 Inch
152	Portable Angle Grinder Bosh/Wolf Make 4 Inch
153	Portable Angle Grinder Bosh/Wolf Make 7 Inch
154	Benchwise 6\"
155	Carbon bushfor angle grinder 4 inch
156	Carbon bushfor angle grinder 6 inch
157	Tri square 6 inch,
158	Tri square 12 inch
159	Screw Driver with testermake TAPARIA
160	POWER HEXA BLADE SIZE 1\" * 16\"
161	ANGLE GRINDER PASTE (CLU MAKE)
162	GRINDING WHEEL AG4(Rough)
163	GRINDING WHEEL AG4(Fine)
164	GRINDING WHEELAG5(Rough)
165	GRINDING WHEELAG5(Fine)
166	GRINDING WHEEL AG7 (Rough)
167	GRINDING WHEEL AG7 (Fine)
168	CUTTING WHEEL AG7
169	CUTTING WHEEL AG5
170	CUTTING WHEEL 4\"
171	Break Liner Ferodo make 1/2\" x 5\"
172	Break Liner Ferodo make8 x 75 mm
173	Break Liner Ferodo make Width=130 mm, Thickness=8 mm
174	CASTLE NUTM-24
175	CASTLENUTM-30
176	HAMMURING SPANNERRING TYPE 42 NO.
177	HAMMURING SPANNERRING TYPE 44 NO.
178	C/U MAKE DEPOSED WHEEL ( HI CUT GRINDING WHEEL 125 * 25 * 2223
179	FLAP DISK 125 MM
180	FLAP DISK 100 MM
181	BEARING PULLER 12\"
182	LOOP EALIBARTOR
183	M.S.ROUND BAR(All Size)
184	S.S.ROUND BAR (All Size)
185	Usha Martin make Steel Wire Rope 19.0 mm for Cane Unloader
186	Spring Steel flat(All Size)
187	Gear Coupling GC-103
188	Gear Coupling GC-104
189	Gear Coupling GC-108
190	Gear Coupling GC-109
191	Gear Coupling GC-110
192	Gear Coupling GC-115
193	Lead Wire 1.5 mm
194	S.S.Plate3mm Grade-410
195	Locltite-500(100 ml pack)
196	G.M. Solid Round Bar (difft. Sizes)
197	Casted G.M. Hollow Round Bar (difft. Sizes)
198	Plumber Block (All Size) SMR Make
199	Ceramic Wool
200	P.V.C. Pipe 1\"Standard
201	Cutting Nozzle Esab make 3/64\"
202	Cutting Nozzle Esab make 1/64\"
203	Esab make Welding Holder 600 Amp.
204	Esab make Welding Cable 600Amp. (Copper)
205	Esab make Welding Cable 600 Amp. (Alluminium)
206	Gas cutting Wrapped Hose pipe for Oxygen 8 mm (Blue)
207	Gas cutting Wrapped Hose pipe for L.P.G. 8 mm (Red)
208	Esab make Oxygen Regulator
209	Esab make LPG Regulator
210	Cutting Nozzle for LPG Set 1/16\"
211	Cutting Nozzle for LPG Set 1/8\"
212	Cutting Nozzle for LPG Set 3/32\"
213	Cutting Nozzle for LPG Set 3/64\"
214	Welding glass Black
215	Welding glass White
216	Esab make Gas cutting Torch Cutogen-5
217	C.I. Casted Pully/Coupling/Drum as per Drg./Sample with material
218	S.S. Screen having 625.5 holes/sq. mtr Universal make V/F sze 14\"x28\", size of screen 600 mm width X 2300 mm Length X 30 swg having both side 50mm border.
219	Rubber Oil Seal (All Size)
220	Seamless Pipe Schedule-40 (All Size)
221	Seamless Pipe Schedule-80 (All Size)
222	Seamless short Bend Schedule-40 (All Size)
223	Seamless short Bend Schedule-80 (All Size)
224	Seamless Long Bend Schedule-40 (All Size)
225	Seamless Long Bend Schedule-80 (All Size)
226	Flat File Rough 14”
227	Flat FileFine 14”
228	Flat file Rough 16”
229	Flat File Smooth 16”
230	Flat file Rough 200mm
231	Flat FileFine200mm
232	Round file Rough 200mm
233	Round file Fine200mm
234	Half Round file 14”
235	Silicon Brass Rod 2mm
236	Mechanical Seal50x60x 7/10
237	Filler Gauge 8”
238	Welding Head Screen
239	Rubber Hose pipe 1”
240	Emery paper Rough
241	Emery paperfine
242	Angle Grinder AG-7 (RollyWolf)
243	Painting Brush4”
244	Painting Brush3”
245	Painting Brush2”
246	Outside Caliper 450 mm
247	Outside Caliper 600 mm
248	Inside Caliper 450 mm
249	Inside Caliper 600 mm
250	Oxygen Regulator NRV
251	Cutter NRV
252	Chavi Bright Bar 40 x 20 mm
253	Inside Circlip Plier 300 mm
254	Outside Circlip Plier 300 mm
255	Circlip 115 mm OD
256	M.S. Flange 325 x 16 mm
257	O\" ring50 x 4
258	D.P. Kit set of 3 pcs
259	D.P. Cleaner
260	Shining Gold Galvanizing Cooling
261	Square SpringEN-9,20 x 225 x 90 mm
262	Bet Circlip Plier 18\"
263	Bet Circlip Plier24\"
264	Trolly Wheel
265	Inside Circlip40 mm
266	L.R.B. Pad (Ceramic wool) 2\" thick
267	L.R.B. Pad (Ceramic wool) 3\" thick
268	Glass Wool
269	Coupling Set 190/140
270	O\" ring Silicon 50 x 60 x 5
271	Safety Belt Full body (ISI marked)
272	Well fastener Bolt, Nut & Washer 3/8\" x 1-1/2\"
273	Deemar Regulator for Welding Machine
274	Counter sank Bolt & Nut 4 x 20 mm
275	M.S. Arm Big
276	M.S. Arm Small
277	Metallic Spiral Gasket ID-54 mm x 4.5 mm thick
278	Multi Purpose Sealant 732 temp. 180°C
279	Brass Strip (All Size)
280	C.I. Pin Bush Coupling URB-320 size 8”as per drg.(Lov Joy)complete set
281	Trolly Drum Gear coupling dia 150 mm
282	Drum Gear coupling dia 300 mm
283	Brake Shoe Liner 6 x 130 mm
284	Brake Shoe Liner 6 x 75 mm
285	Hydex Sleeve H-48
286	Solenoid valve with Coil (D64V-5-8C JVM-VH6-20) Vicker make
287	Suction Line filter (Hydroline IFE-50-25-B)
288	Returning Line filter (Hydroline SC-3050)
289	Wear Pad (Black/White), Material-Metalon (6PLB)
290	Seal Kit Assembly for Hydraulic cylinder size 80 mm
291	M.S. Hydraulic connector 3/4\"
292	Shaft for Hydraulic Pump of Cane Unloader Model PVQ-40 (Vicker make)
293	Silicon BronzeRod 3mm
294	Tempered Centre for 30 feet Lathe
295	Tool Grinder Wheel Rough 10\" OD x 1\" thickness x 1-1/4\" bore (Black)
296	Tool Grinder Wheel Rough 10\" OD x 1\" thickness x 1-1/4\" bore (Green)
297	Spring Steel flatEN-4563 X 8mm
298	Spring Steel flat EN-4545 x 6 mm
299	G.M. Solid Rod 50 mm OD x 12\" long
300	G.M. Solid Rod 80 mm OD x 12\" long
301	G.M. Hollow Cylinder 60 mm ID, 150mm OD & 12\" Length
302	KSB make IBR approved steam valve tested at 60 kg/cm2 pressure with test certificate, class-1500 size 3/4\" Non-flanged end.
303	KSB make IBR approved steam valve tested at 70 kg/cm2 pressure with test certificate, class-800 size 1\" Non-flanged end.
304	KSB make IBR approved steam valve tested at 70 kg/cm2 pressure with test certificate, class-800 size 1.5\" Non-flanged end.
305	KSB make IBR approved steam valve tested at 70 kg/cm2 pressure with test certificate, class-800 size 2\" Non-flanged end.
306	Steam Rubber Hose pipe wire braided HP R-2, 32mm (1-1/4\")
307	Fenoflex spacerCoupling complete F0100ES
308	Elbow Ferrul 8 mm
309	Elbow Ferrul Nut 8 mm
310	Stag Jointing paste
311	Premium zinc alluminium galavanizing spray
312	Premiumgold zinc galavanizing spray
313	Aluminium Sheet -14 gauge
314	Heavy duty hydraulic Pump , 60 Tonn load,Max. pressure -730Kg.
315	Channel 75mm
316	Channel 100mm
317	Anglebar75 mm
318	Joist300mm bar
319	Coupling LFG-102
320	Coupling LFG-103
321	Teflon Gland-6mm
322	Teflon Gland-8mm
323	Teflon Gland-10mm
324	Teflon Gland-12mm
325	Spiral Gasket 2.5inches or 35 mm
326	TIG Electrode size 2.4mm x 150mm
327	EN-9 Shaft 65mm x 45mm
328	Molycoat \"Z\" powder
329	Molycoat G-Rapid Plus
330	Molycoat D-321 R
331	Molycoat Grease 1000
332	Angle Grinder AG-4 Model 45-100 Rallywolf make
333	Wire braided Rubber Hose pipe 1/4\" x 12\"
334	HP Steam Rubber Hose pipe wire braided for Hot water at 100°C temp. size 1-1/4\"
335	HP Steam Rubber Hose pipe wire braided for Hot water at 200°C temp. size 1-1/4\"
336	Filter Cloth Swiss High Precision Screening Fabric
337	K-Smart Premium Blue Screw Oil 20L pack (Kirloskar make)
338	Atlas Copco Rotto Synthetic Fluid Ultra lubricant 20L pack
339	White Goggle
340	Wire brush for tube cleaning size 16mm
341	Dome Seal size 12\"
342	Cold Vulcanizing Adhesive Cement KS-5010
343	Rubber Goods, Oil Seal, Butterfly Valveand V-belts
344	Rubber Joint Sheet (All Size)
345	Oil seal(All Size)
346	Gate Valve 15 mm (KSB Make) class 800 IBR
347	Gate Valve 25 mm (KSB Make) class 800 IBR
348	Gate Valve 50 mm (KSB Make) class 800 IBR
349	Check Valve 25 mm (KSB Make) class 800 IBR
350	Check Valve 50 mm (KSB Make) class 800 IBR
351	Butterfly Valve Rubber sheetDN-350, 14 mm
352	Butterfly ValveDN-350, 14 mm
353	Butterfly Valve50 mm (Crane make/KSB)
354	Butterfly Valve65 mm (Crane make/KSB)
355	Butterfly Valve80 mm (Crane make/KSB)
356	Butterfly Valve 100 mm (Crane make/KSB)
357	Butterfly Valve 125 mm (Crane make/KSB)
358	Butterfly Valve 150 mm (Crane make/KSB)
359	Butterfly Valve 200 mm (Crane make/KSB)
360	Butterfly Valve 250 mm (Crane make/KSB)
361	Butterfly Valve 12\" size Crane make
362	Butterfly ValveRubber seat for 65 mm size valve (Crane make)
363	Butterfly Valve Rubber seat for80 mm size valve (Crane make)
364	Butterfly Valve Rubber seat for100 mm size valve (Crane make)
365	Butterfly Valve Rubber seat for 5\" size valve (Nitrile EPDM) Crane make
366	Butterfly Valve Rubber seat for 6\" size valve (Nitrile EPDM) Crane make
367	Butterfly Valve Rubber seat for 8\" size valve (Nitrile EPDM) Crane make
368	Butterfly Valve Rubber seat for 10\" size valve (Nitrile EPDM) Crane make
369	Butterfly Valve Rubber seat for 12\" size valve (Nitrile EPDM) Crane make
370	KSB Make NRV Size 1\"
371	KSB Make NRV Size 1.5\"
372	KSB Make NRV Size 2\"
373	Angle valve Rubber seat (Silicon butyl)Temp. resistance +200oC Size 280 ODx170 IDx20 mm thickness
374	Angle valve Rubber seat(Silicon butyl)Temp. resistance +200oCSize 325 ODx210 IDx20 mm thickness
375	Angle valve Rubber seat(Silicon butyl)Temp. resistance +200oC Size 400 ODx270 IDx20 mm thickness
376	Angle valve Rubber seat(Silicon butyl)Temp. resistance +200oC Size 550 ODx420 IDx20 mm thickness
377	Angle valve Rubber seat(Silicon butyl)Temp. resistance +200oC Size 650 ODx520 IDx20 mm thickness
378	Angle valve Rubber seat(Silicon butyl)Temp. resistance +200oC Size 950 ODx800 IDx25 mm thickness
379	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 325 ODx210 IDx20 mm thickness
380	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 280 ODx170 IDx15 mm thickness
381	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 230 ODx80 IDx12 mm thickness
382	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 170 ODx65 IDx12 mm thickness
383	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 145 ODx40 IDx12 mm thickness
384	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 125 ODx40 IDx12 mm thickness
385	Puri make globe valve rubber seat (Neoprene) Temp. resistance +150oC Size 100 ODx20 IDx12 mm thickness
386	Rubber Diaphragm Valve for SO2 gas line (Neoprene) Size8” valve (sheet) OD 410 x 10 mm thick
387	Rubber Diaphragm Valve for SO2 gas line (Neoprene) Size6” valve (sheet) OD 310 x 10mm thick
388	Rubber Diaphragm Valve for SO2 gas line (Neoprene) Size 4” valve (sheet) OD 225 x 10mm thick
389	Neoprene Rubber ring for Manhole temp. resistance + 1500C size OD 580x ID 490x 10mm thick
390	Double beat valve Rubber seat for Juice Heater (Neoprene) size 235mm ODx12mm thickness central hole ø 25mm
391	Juice Heater rubber strip size 16mm x 16mm x 12mm
392	Rubber seat for Mud Telescopic valve (Dorr), (Neoprene) size 200mm OD x 165mm ID x 15mm thick
393	Rubber Hose pipe size 1\"
394	Rubber Hose pipe size 3/4\"
395	Rubber Coupling Bush Dholak type OD at Centre=29.8 mm, OD at side end= 22mm, ID= 12mm, Length=33mm
396	Seal Kit complete set for 200mm Cylinder of Pan Cut -over valve
397	Seal Kit complete set for 300mm Cylinder of Pan Discharge valve
398	Seal Kit complete set for 80mm Cylinder of Lock valve
399	Rubber seat for Pan Discharge valve size 650mm OD x 490mm ID x 25mm thick
400	Pan Cut over Valve Rubber seat 265 x 175 x 20 mm
401	Rubber Kit for Plough (Three Cylinders)- Plough up & down
402	Rubber Kit for Plough (Three Cylinders)- Plough down & up
403	Rubber Kit for Plough (Three Cylinders)- Plough in & out
404	Bottom Hood cylinder Rubber kit
405	MTC Controller cylinder complete rubber kit
406	Angle Valve Rubber seat for Quad sizes OD=850mm, ID=700mm, Thickness= 20mm
407	Rubber Mud seal for Dorr size 20 x 18 x 10mm
408	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 50mm
409	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 65mm
410	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 80mm
411	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 100mm
412	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 125mm
413	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 150mm
414	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 200mm
415	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 250mm
416	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 300mm
417	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 350mm
418	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 400mm
419	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 450mm
420	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 500mm
421	Crane make Wafer type Butterfly Valve C.I. Body, SS disc EPDM-H of size 600mm
422	Liner for Butterfly Valve C.I. Body, SS disc 50 mm
423	Liner for Butterfly Valve C.I. Body, SS disc 65 mm
424	Liner for Butterfly Valve C.I. Body, SS disc 80 mm
425	Liner for Butterfly Valve C.I. Body, SS disc 100 mm
426	Liner for Butterfly Valve C.I. Body, SS disc 125mm
427	Liner for Butterfly Valve C.I. Body, SS disc 150 mm
428	Liner for Butterfly Valve C.I. Body, SS disc 200 mm
429	Liner for Butterfly Valve C.I. Body, SS disc 250 mm
430	Liner for Butterfly Valve C.I. Body, SS disc 300 mm
431	Liner for Butterfly Valve C.I. Body, SS disc 350 mm
432	Liner for Butterfly Valve C.I. Body, SS disc 400 mm
433	Liner for Butterfly Valve C.I. Body, SS disc 450 mm
434	Liner for Butterfly Valve C.I. Body, SS disc 500 mm
435	Liner for Butterfly Valve C.I. Body, SS disc 600 mm
436	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 15mm
437	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 20mm
438	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 25mm
439	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 32mm
440	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 40mm
441	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 50mm
442	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 65mm
443	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 80mm
444	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 100mm
445	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 125mm
446	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 150mm
447	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 200mm
448	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 250mm
449	Sounders Brand Diaphragm Valve with Neoprene Weir type flanged end with Hard Rubber lined 300mm
450	Siliconied Butyl rubber seat size 400 x 260x25 mm
451	Siliconied Butyl rubber seat size 400 x 315x25 mm
452	Pan Feed Valve seat size 170 x 65 x 12 mm
453	Pan Feed Valve seat size 145 x 40 x 12 mm
454	Pan Feed Valve seat size 125 x 40 x 12 mm
455	Dorr Mud seal 20 x 25 x 22mm
456	Rubber Seat plain 100 x 20 x 10 mm
457	Rubber Seat plain 80 x 20 x 10 mm
458	Rubber Seat for Gasket 1500 x 5000 x 6 mm
459	Seal Kit for main Pneumatic Cylinder of Pan Discharge Valve size 12\" (PURI make)
460	Tyre Coupling complete (All Size)
461	Coupling Assembly L-100
462	Belt for Sugar Stacker 12 Mtr Long (CCPL-INSTACON Make) Conforming to IS:1891 (Part-I) Size 650mm wide X 315/3 X 3 Ply X 3.0 mm Top & 2.0 mm Bottom, Grade M-24 Thickness 8 mm, Chevron 1-V-15-375 Profile Belt
463	Rubber Conveyor Belt (CCPL-INSTACON Make) Conforming to IS:1891 (Part-I) Size 1200mm wide X 315/3 X 3 Ply X 5.0 mm Top & 4.0mm Bottom, Grade M-24 Thickness 12 mm
464	Star Coupling completeL-75
465	Coupling Tyre F-80
466	Spider Rubber 95-100
467	Spider Rubber 100-110
468	Spider Rubber 75
469	Rubber Tyrefor Coupling (All Size)
470	Rubber Star for Coupling L-100
471	Rubber Star for Coupling L-75
472	Rubber Tyre Coupling (All Size)
473	Cast Steel Items
474	Cast Steel Trash Plate for Mill size 36” x 72” on New Material basis, Material-Cast Steel IS: 2708-1984, Grade-III Proof Machined as per Drg. No. SS0008-05252501-008-052 Rev (00) after Proof machining extra size in length, width & height will be 5-10mm limit range
475	Cast Steel Scrapper for Mill size 36” x 72” on New Material basis, Material-Cast Steel IS: 2708-1984, Grade-III Proof Machined as per Drg. No. SS0008-05250532-008 Rev (00) after Proof machining extra size in length, width & height will be 5-10mm limit range
476	Cast Steel Trash Plate for Mill size 36” x 72” on Conversion basis, Material-Cast Steel IS: 2708-1984, Grade-III Proof Machined as per Drg. No. SS0008-05252501-008-052 Rev (00) after Proof machining extra size in length, width & height will be 5-10mm limit range
477	Cast Steel Scrapper for Mill size 36” x 72” on Conversion basis, Material-Cast Steel IS: 2708-1984, Grade-III Proof Machined as per Drg. No. SS0008-05250532-008 Rev (00) after Proof machining extra size in length, width & height will be 5-10mm limit range
478	Cast Steel Crown Pinion having 17 Teeth for Mill size 36\" x 72\" on New Material basis IS : 2708
479	Cast Steel Crown Pinion having 17 Teeth for Mill size 36\" x 72\" on Conversion basis IS : 2708
480	Paint & Varnish
481	Red Oxide Primer Zinc Chromate Berger
482	Post Office Red Paint Berger
483	Azure Blue Paint Berger
484	Bus Green Paint Berger
485	Tractor Orange paint Berger
486	Golden Yellow Berger
487	Smoke Gray paint Berger
488	Black paint Berger
489	White Paint Berger
490	Epoxy Black paint
491	Alluminium Paint with Paste
492	G.P. Thinner
493	Elmoluft 1A (Golden Varnish)
494	Alluminium Oxide Brown
495	Black Bitumin (Tarcoal)
496	Birkosit paste
497	Tools & Tackles
498	Cold Chisel4”(Jhalani/Taparia make)
499	Cold Chisel6”(Jhalani/Taparia make)
500	Cold Chisel8”(Jhalani/Taparia make)

Also Visit

Tenders

Uttar Pradesh Tenders

Machinery and Tools Tenders

Hardware and Fasteners Tenders

Nuts Supply Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Supply Of Hardware, Tools And Tackles, Nut-Bolts, Cast Steel, Butterfly Valve And Rubber Goods Etc. , Supply Of Hardware , Cotton Waste (White) , Cotton Waste (Coloured) , Emery Cloth Rough(Carborundum Universal Make) , Emery Cloth Fine(Carboru, Azamgarh-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Supply Of Hardware, Tools And Tackles, Nut-Bolts, Cast Steel, Butterfly Valve And Rubber Goods Etc. , Supply Of Hardware , Cotton Waste (White) , Cotton Waste (Coloured) , Emery Cloth Rough(Carborundum Universal Make) , Emery Cloth Fine(Carboru, Azamgarh-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us