Tender For Reptile House Remaining Work At Sajjangarh Biological Park, Udaipur - Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Rackingofjointsetc. Complete Fine Finish :25 Mm Thickb/S, Visitor, Immu. Wall, Side Wall, B-12.3.1 2 Wal, udaipur-Rajasthan

Tender For Reptile House Remaining work at Sajjangarh Biological Park, Udaipur - Plaster on new surface on walls in cement sand mortar 1:6 including rackingofjointsetc. complete fine finish :25 mm thickB/s, Visitor, Immu. Wall, side wall, B-12.3.1 2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. Qty same as plaster 12.40.1 3 Steel work in built up tubular trusses including cutting, hoisting( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes.B-9.3.2 4 Structural steel work riveted, bolted or welded in built sections, trusses and framed work, including cutting, hoisting (height up to 10 m) fixing in position and applying a priming coat of approved steel primer all complete: B-9.2 5 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work 12.46.1 6 Wiring oflight point/fanpoint/exhaust fanpoint /callbellpoint with 1.5sq.mmnominal size FRPVC insulated unsheathed flexible copper conductor 1.1kV grade and 1.5sq.mm nominal size FRPVCinsulated unsheathed flexible copper earthconductor 1.1kVgrade (IS:694) in recessed ISI markedMMS(IS:9537PIII)virginmaterialPVCconduit& its ISImarked(IS:34191988) accessories, roundtiles, 1.2mmthick Hot Dipped Galvanized Modular Box with earth terminal, 10AM odular switch, Modular face plate with grid plate, 3 pin ceilingrose/Holder /3 way connector, screws, makingconnections, testing etc. as required. For specificationof copper Conductor, Phenolic Laminated sheets & Electrical /Wiring accessories refer Chapter E-04,E-05&E07For additional technical parametersofproduct /work refer Annexure A attached with this BS .Short point (up to 3 mtr.)PWD BSR 2022 CH-E-01/ Item 1.1.1E01 1.1.1 7 Medium point (up to 6 mtr)PWD BSR 2022 CH-E-01/ Item 1.1.1.E01 1.1.1 8 long point PWD BSR 2022 CH-E-03/ Item 3.1.3. 9 Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K/6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge for additional technical parameters of product/ work, refer Annexure A attacheded with this BSR :18/20 Watt PWD BSR 2022 CH-E-017/ Item 17.9.E03 3.1.3 PWD BSR 2022 CH-E-017/ Item 17.9.5 E-17 /17.9.5 10 2.26 P&FPVCStorageTank ISI Marked (IS:12701) indicatin theBISlicenseNo), ofapprovedmakewithcover,25mmdia 1MlongG.I. over-flowpipe&25Cm. long washout pipe with plug & socket, including making connection etc., complete of approved design: 1000ltr capacityPWD BSR 2022 CH-s-2/ Item 2.26.5S2/2.26.5 11 2.37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed )20 mm nominal diaPWD BSR 2022 CH-s-2/ Item 2.37.2S2/2.37.2

INR 1000 /-

INR 20000.0 /-

INR 9.97 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB