Tender For Maintenance Of Chauki, Flying Range Office And Related Places In Sajjangarh Wildlife Sanctuary As Per G-Schedule. - Maintenance Of Khedi Chauki Rang Sajjangarh - Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Giv, udaipur-Rajasthan

Tender For Maintenance Of Chauki, Flying Range Office And Related Places In Sajjangarh Wildlife Sanctuary As Per G-Schedule. - Maintenance Of Khedi Chauki Rang Sajjangarh - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:12.40.1 Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. PWD BSR 2022 CH-B-12/ Item 12.40.1 2 12.46 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 12.46.1 Two or more coats on new workRoom 1PWD BSR 2022 CH-B-12/ Item 12.46.1 3 Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer in-charge. PWD BSR 2022 CH-B-10/ Item 10.24 PWD BSR 2022 CH-B-10/ Item 10.24 4 Wiringof lightpoint/fanpoint/exhaust fanpoint/callbellpointwith 1.5sq.mmnominal sizeFRPVCinsulatedunsheathedflexiblecopper conductor1.1kVgrade and1.5sq.mmnominal sizeFRPVCinsulated unsheathed flexiblecopper earthconductor 1.1kVgrade (IS:694) in recessedISImarkedMMS(IS:9537PIII)virginmaterialPVCconduit& its ISImarked(IS:34191988)accessories,roundtiles,1.2mmthickHot DippedGalvanizedModular Boxwith earth terminal, 10AModular switch,Modularfaceplatewithgridplate,3pinceilingrose/Ho lder/3 wayconnector, screws, makingconnections, testingetc. as required. For specificationof copper Conductor, PhenolicLaminatedsheets& Electrical/WiringaccessoriesreferChapterE-04,E-05&E07For additional technical parametersofproduct /work referAnnexure A attached with this BS.Short point (up to 3 mtr.) PWD BSR 2022 CH-E-01/ Item 1.1.1 5 Medium point (up to 6 mtr) PWD BSR 2022 CH-E-01/ Item 1.1.1. 6 Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in chargefor additional technical parameters of product/ work, refer Annexure A attacheded with this BSR :18/20 Watt PWD BSR 2022 CH-E-017/ Item 17.9. PWD BSR 2022 CH-E-017/ Item 17.9.5 7 Pillar Cock 15 mm nominal size PWD BSR 2022 CH-S1/ Item 2.33.1 8 Concealed stop cock 15 mm nominal sizePWD BSR 2022 CH-S1/ Item 2.33.9 9 Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintPWD BSR 2022 CH-B-9/ Item 9.17Door 10 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.PWD BSR 2022 CH-B-9/ Item 9.5DoorVentilators 11 Finishing with neat cement (punning).PWD BSR 2022 CH-B-12/ Item 12.7 12 Concealed stop cock 15 mm nominal sizePWD BSR 2022 CH-S-2/ Item 2.33.9

INR 1000 /-

INR 26000.0 /-

INR 12.98 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB