Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-07-2025 | Amendment | Other | 16-07-2025 |
| Sl. No. | Item Description |
| 1 | Dismantaling of Asbestos(corrugated , semi corrugated, etc) cementsheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 3 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eavesfixed with self tapping screws as complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) and removing rubbish to outside defence area complete all as specified and directed. |
| 5 | M&L for PCC 50 mm thk 1:2:4type B-0(using 12.5 mm graded stone aggregate) as in foundations, filling or as in sub base and mass concrete complete all as specified and directed. |
| 6 | M&L for 75mm thick, PCC 1:3:6, Type C-2, using 20mm graded stone aggregate as in Plinth protection etc, laid in alternate pannel, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for providing, plain cement concrete 1:2:4 type B0(using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, Chajjas, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, neelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 9 | M & L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L for Dark shade/ Double charged vitrified ceramic tiles 10 mm thk (square/rectangular) polished ,area of each tiles not exceeding 0.36 sqm in floors etc, set and jointedin neat cement slurryand pointedin white or coloured cement to match dark shade and including screed bed 15mm thk in cement mortar 1:4 complete all as specified and directed. |
| 11 | M & L for glazed ceramic coloured / printed tiles 600mm x 300mmx7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles and including screed bed 15mm thk in CM 1:4 , complete all as specified and as directed. |
| 12 | M&L for Dark shade/Double charged vitrified ceramic tiles 10 mm thk (square/rectangular) polished ,area of each tiles not exceeding 0.36 sqm/ 600mm x 300mm x 10mm on vertical surfaces etc, set and jointedin neat cement slurryand pointedin white or coloured cement to match dark shade and including screed bed 15mm thk in cement mortar 1:4 complete all as specified and directed. |
| 13 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 14 | S&F for powder coated GI Snap grid system of size 605 X 605 mm for ceiling fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the following sections complete all as specified and directed:-(i) Main Tee 28mmx24mmx0.3mm thick, (ii) Cross Tee 28mmx24mmx0.3mm thick and (iii) Wall angle 24mmx24mmx0.3mm thick complete all as specified and directed. |
| 15 | S & F for 4 mm thick designer ceiling (E-board classic tiles) for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or GI sanp grid or with staples on snap grid as in ceilingwith and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed. |
| 16 | Dismantling timber scantlings 40sqcm and over in section, in Unframed work complete all as specified and directed. |
| 17 | M&L for Timber framed andfixed second class hard wood clean sawn secand class hard wood in scantlings complete all as specified and directed. |
| 18 | M&L for Plain, soild, straight chowkats and frames, wrought, framed rebated on the soild,rounded or chamfered, put togather with glue pinned at joints complete all as specified and directed. |
| 19 | Taking down, Resecuring & Adjusting and refixing in the same opening shutters of any description exc1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 20 | Dismantling of wrought iron or mild steel work of any description not otherwise provided etc. |
| 21 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe 410-W (Gde E250) quality-A including distance pieces, cleats etc complete all as specified and directed. |
| 22 | S&F in repair wash down water closet pan one piece EWC including flushing cistren white including seat cover of make PARRYWARE (EDEN) ORequibvalent in cera/ Hindware/Jaquaras approved by GE including suitble CP Health faucet15 mm dia of 01 mtr length, flush pipe and fixed complete jointing and making good the disturbed surfacesto make good with the existing finish complete all as specified and directed. |
| 23 | S&F in repair Toitet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 24 | S&F in repair Brass chromium plated shower rose 125 mm size complete all as specified and directed. |
| 25 | S&F in repair soap dish,vitreous china white ,approximate size 160 x 160x 90mm complete all as specified and directed. |
| 26 | S&F in repair wall mixer swan neck, 3 in one cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered \"hot\" or \"cold\" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed. |
| 27 | S&F in repair cabinetmirror of minimum size of400mm x 550mm of approved make complete all as specified and directed . |
| 28 | S & F in repair for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 29 | S&F in repair 110mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor complete all as specified and directed. |
| 30 | S&Fin repair 110mm bore PVC (SWR) bends of any radius completeall as specified and directed. |
| 31 | S & F in repair 75 mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor completeall as specified and directed. |
| 32 | S & F in repair75mm bore PVC (SWR) bends of any radius completeall as specified and directed. |
| 33 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required and reconnecting / re-fixing in position after cleaning of water tank, capacity 500 to1000 ltrs with all scales and dirts from inside of tank andmouth of inlet/outlet using bleaching powder and washed with water including supplying and fixing of GI fitting required as per site requirement complete all as specified and as directed. |
| 34 | S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) completeall as specified and directed. |
| 35 | Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 25 or 32 mm bore complete all as specified and as directed. |
| 36 | Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15 mm bore complete all as specified and as directed. |
| 37 | S&F for 32 mm bore GItubes medium grade Galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and directed. |
| 38 | S&F for 15 mm bore GItubes medium grade Galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and directed. |
| 39 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m complete all as specified and directed. |
| 40 | M&L for rendering 10mm thick on fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:6and finished fair and even without using extra cement incl; mixing of water proofing compound of approved makecomplete all as specified and directed.Note: WPC shall be measured and paid for separatly. |
| 41 | M&L for rendering 15 mm thick onother than fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4and finished fair and even without using extra cement complete all as specified and directed. |
| 42 | Supply only Integral water proofing compound complete all as specified and directed. |
| 43 | Demolition of Brickwork or stone/ boulder masonary,built in cement mortar or cement lime mortar complete all as specified and directed. |
| 44 | M&L for brick work built in cement mortar 1:6 straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and directed. |
| 45 | S&F in repair CP health faucet with complete assembly including taking down existing complete all as specified and directed. |
| 46 | S&F for 15 mm bore Stop/angle valves, Chromium plated fancy typescrewed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 47 | S&F for 32mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair complete all as specified and directed. |
| 48 | S & Ffor PVC connections pipe 15mm dia and 600 mm longwith PTMT complete all as specified and directed. |
| 49 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames complete all as specified and directed. |
| 50 | Taking down, Resecuring or easing & adjustiing and refixing in same opening of chowkats or frames exc 1.0 sqm and n.exc 2 sqmeach with shutters(without taking off shutters from the frame complete all as specified and directed. |
| 51 | S&F for powder coated aluminium door frame with shutter of section 100mm x 45 mm thickness of sheet 16 gauge, paritially glazedand panelledlock rail / bottom rail of shutter 100mm x 45mmtop raio 80mm x 45mm including necessary jointing cleats glazinging clips ,rubber packing anodised aluminum including necessary fittingand aluminium mongeries i.s 150 mm long two nos aluminium handles 02 nos, 200 mm long aluminium tower boltshinges with each leaf ,rubbergasket for securing the glass and 3 nos100 mm long butt hinges with each leaf with and including 5.5mm thick tinted glass pvcpanelling includingmortice lock grills in glazed portion etc complete all as specified and directed. |
| 52 | S&F for Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 53 | S&F for Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed. |
| 54 | Taking down chowkats or frames n, exc 1.0 sqm each with shutters (without taking off shutters from the frames complete all as specified and directed. |
| 55 | M&L for aluminium ventilator frames with frame of section 100mm x 44 mm of thickness1.6 mm shutters of section32 mm x 15mm (with and including half portion fixed glazed shutterand rest half portionlouvered with glazedshutter) including stainless steel wire mesh, rubbergasket for securingth glass , 5.5 mm thick figuredglass, aluminium grill and necessary aluminiummongaries and handles includingnecessary lockingarrangment complete all as specified and directed. |
| 56 | S&F for powder coated aluminium sliding windows two track with two sliding shutters with extrusions aluminium of following sections including jointing cleats, glazing clips, rubbr packaging, snap beading and other necessary builders hardware as required complete all as specified and directed. (A) FRAME:-(i) Top and side member fortwo track frame of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.784 kg/ mtr), Model No. 20829 of Jindal or equivalent as specified in PS.(ii) Bottom rail of frame for sliding of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.909 kg/ mtr), Model No. 20830 of Jindal or equivalent as specified in PS.(B) SHUTTER:-(i) Top and bottom rail of sliding shutter of size 40 mm x 18 mm x 1.5 mm (weight 0.547 Kg/ mtr), Model No. 20736 of Jindal or equivalent as specified in PS.(ii) Side of sliding shutter with handle and self locking arrangement, section of size 40 mm x 18 mm x 1.5 mm (weight 0.547kg/ mtr), Model No. 20738 of Jindal or equivalentas specified in PS.(C) Sliding shutter to be provided with 5.5 mm thick sheet glass complete all as specified and directed.(D) Supply & Fix for 6.5 mm thick aluminium diamond grill with mill finished fixing on wall/wooden chowkhat/ aluminium frame with suitable size of aluminium \"U\" channel and steel chromium plated, screw with rawel plug complete all as specified and directed with following details:- (i) Aperture size of aluminium grill 67 mm x 84 mm. (ii)Cord dimension 7 mm x 5.8 mm. (iii) Plate thickness 2 mm.(E)Supply & Fix for Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with galvanised wire staples/ clip/ aluminium flat, complete all as specified and as directed. |
| 57 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed. |
| 58 | M&L for single coat of synthetic enamel painting to new wooden surfaces over a coat of pink primer over 10cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 59 | S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 60 | M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 61 | M&L for Preparing oldplaster surfaces(external face) of walls and applying one coat ofcement based paint complete all as specified and directed. |
| 62 | M&L in repair for preparation of old decorated plastered surfaces of ceiiling /false ceiling and applying one coat of white wash complete all as specified and directed. |
| 63 | M&L in repairfor Preparing newly plaster surfaces(external face) of walls and applying one coat cement based paint over a coat of alkali resistance primer complete all as specified and directed. |
| 64 | M&L for preparation of old decorated plastered surfaces of wallsby washing , rubbing down and stopping of distempered surfaces and applyingone coat of distemper iol emulsion over one coat of distemper oil emulsionover one mm thk one coat of wall care putty incl complete removal of existion treatment complete all as specified and directed. |
| 65 | M&L for preparation of old decorated plastered surfaces of wallsby washing , rubbing down and stopping of distempered surfaces and applying wall care white puttythickness not less than 2mm and sand papering surface to achieve smooth surface and applyingtwo coat of acrylic based distemperl emulsionover a coat of cement based primer ,white or tinted including washing floors, cleaning glass,joinery,electrical fitting, wiring etc., of drops and splashes including taking down old surfaces complete all as specified and directed. |
| 66 | S&F for 15mm bore diaPillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 67 | S & F for 125mm longChromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union Brass chromium plated shower rose complete all as specified and directed. |
| 68 | S & F for 15 Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 69 | S&F for PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 70 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 71 | S&F for Butt hinges of size 100mm, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 72 | S&F for 200mm Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified and directed. |
| 73 | S&F for 150 mmExtruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 74 | S&F for 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 75 | S&F for Aluminium anodised towel rail, 20mm dia,60cm long between flange complete all as specified and directed. |
| 76 | S&F in repair door closer hydraulically regulated designed No 2 universal type, suitable for door shutter of 851 to 1000 mm in width and weighting between 61 to 80 kg of aluminium extruded section complete all as specified and directed. |
| 77 | S&F for Butt hinges of size 100mm, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 78 | S&F for 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 79 | S & F in repairharrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 80 | M&L for chequered cement tiles 20 cm x 20cm x25 mm thick with white cement and pigment set ,jointed and pointed in neat cement slurry complete allas specified and directed. |
| 81 | S&F for soild PVC wall lining consisting of 5 mm thk plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specification and drawing complete all as specified and directed. |
| 82 | S&F for 5mm thk PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 83 | S&F in repair central hole basin mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered \"hot\" or \"cold\" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed. |
| 84 | S & F in repair PVC valveless, syphone action type flushing cistern, low level,white with inlet ball valve float and handle 10 ltrs capacity incl brackets in repairs complete all as specified and directed. |
| 85 | S&fin repair Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 86 | S&F in repair wash basin ,vitreous china (flat back or angle back type) any size ,including cutting for and pinning in end of brackets of erecting stand complete all as specified and directed. |
| 87 | Cutting chases, pinning in . Makin good to gacings where required and pointing in cement mortar 1:3 to end and edges of landings,steps,cills, sunshades ,shelves,lintels,etc and cutting chases for concealedwater tubingsor concealed conduit wiring etc and making good ,cutting n.exc 10 cm girth complete all as specified and directed. |
| 88 | S&F for single towel rail 600mm long, stainless steel complete all as specified and directed.Make : Jaquar Cat No CAN-1111SM or equivalent make Parryware, Cera as approved by GE. |
| 89 | S&F for stainless steel towel ring round with round flange complete all as specified and directed.Make : Jaquar Cat No CAN-1121BN or equivalent make Parryware, Cera as approved by GE. |
| 90 | S&F for Helath faucet ABS Body with 8mm dia, 1.5meter long spirochreme flex tube & wall hook complete all as specified and directed. Make : Jaquar Cat no ALD-587 or equivalent make Parryware, Cera as approved by GE. |
| 91 | S&F for toilet roll holder with stainless steel flap complete with fittings complete all as specified and directed.Make : Jaquar Cat No ACN-1153S or equivalent make Parryware, Cera as approved by GE. |
| 92 | S&F for corner glass shelf (with bracket) with complete fittings complete all as specified and directed.Make : Jaquar Cat No CAN-1173 or equivalent make Parryware, Cera as approved by GE. |
| 93 | S&F for bib cock with wall flange complete all as specified and directed.Make : Jaquar Cat No KUP-35037PM or equivalent make Parryware, Cera as approved by GE. |
| 94 | S&F for angular stop cock with wall flange complete all as specified and directed.Make : Jaquar Cat No KUP-35053PM or equivalent make Parryware, Cera as approved by GE. |
| 95 | S&F for PVC Soffit systemfor False Ceiling / Wall Panelling purpose, to be screw fixed on a GI (GI-0.4mm) Channels or equivalent and standard hardware framework with interlocking between panels, Panel Size: 2700x300mm/; Panel colours : 4 shades of Wooden (Walnut / Winchestar oak / Oak /Golden Oak ) or 3 Shades of Uni Colour (White / Brown / Graphite); to be applied with finishing trims in same colour combination of soffit panel (J - Trim & T – Trim for False Ceilings. Panels to be in strict compliance with PN-EN ISO 527-1:2012 / PN-EN ISO 527-2:2012. Soffit Panels, 340 mm (effective usage area of 300mm) wide, 12 mm deep, 1.2 mm thick PVC sheets, plain / perforated / hidden perforated without non-woven acoustic textile. Panels feature a 11 mm wide flange for interlocking between the panels. Optionally the flange with 11 x 3 mm ventilation holes can be used to achieve a ventilated ceiling. Panels to be manufactured from Solid PVC surfacePanels have a size of 2700x340mm; Effective size for Coverage: 2700x300mm. Panels to be installed using J – Trim along the periphery and to be coupled in longitudinal direction using T – Trim of the same colour combination of the panel for False Ceiling applications complete all as specified and directed. |
| 96 | S&F in repair exposed part kit of single lever Basin Mixer Wall mounted consisting of operating lever, cartridge sleeve, wall flange, nipple &spout (Compatible with ALD-233N) complete all as specified and directed.Make :Jaquar Cat No COP -233 NKPM or equivalent make Parryware, Cera as approved by GE. |
| 97 | S&F in repair thin rim table top Vitreous China Wash basin white coloured of size600mm x410 x 100 mm thk including bracket completeall as specified and directed .Make Jaquar Cat no LYS-WHT-38901 N or equivalent make Parryware, Cera as approved by GE. |
| 98 | S&F in repair wash down water closet pan one piece EWC including flushing cistren white including seat cover complete including all necessary fittings . Make : Jaquar or Equivalent make Parryware, Cera as approved by GE. |
| 99 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit includingremovalof batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed. |
| 100 | Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed. |
| 101 | M&L for consealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with allaccessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB\"s or common earth dolly complete all as specified and directed. |
| 102 | Description all as per item No 101 here in before butfor one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed. |
| 103 | Description all as per item No 101 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 104 | Description all as per item No 101 here in before butfor one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 105 | Description all as per item No 101 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and directed. |
| 106 | Description all as per item No 101 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. |
| 107 | S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 108 | S&F in repair modular swith 6/10 Amp one module complete all as specified and directed. |
| 109 | S&F in repair modular swith 16 Amp one module complete all as specified and directed. |
| 110 | S&F for Modular socket 6 Amp 2/3 Pin combined2 module 230 volt flush type complete all as specified and directed. |
| 111 | S&F for Modular socket 6/16 Amp2/3 Pin combined2 module 230 volt flush type complete all as specified and directed. |
| 112 | S&F for Modular Bell push 6A 1 moduleflush type complete all as specified and directed. |
| 113 | S&F for Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 114 | S&F in repair modular fanregulator 120W 230volts AC 50 Hz 2 modules complete all as specified and directed. |
| 115 | S&F forwhite cover plate with frame 1 moduleincluding taking down existing unserviceable complete all as specified and directed. |
| 116 | S&F forwhite cover plate with frame 3 moduleincluding taking down existing unserviceable complete all as specified and directed. |
| 117 | S&F for white cover plate with frame 6 moduleincluding taking down existing unserviceable complete all as specified and directed. |
| 118 | S&F forwhite cover plate with frame 8 moduleincluding taking down existing unserviceable complete all as specified and directed. |
| 119 | S&F for modular metal flush box of 1 Module including taking down existing unserviceable complete all as specified and directed. |
| 120 | S&F for modular metal flush box of 3 Module including taking down existing unserviceable complete all as specified and directed. |
| 121 | S&F for modularmetal flush box of 6/8 Module including taking down existing unserviceable complete all as specified and directed. |
| 122 | S&F for LED lights fitting 1 X 18/20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old one complete all as specified and directed.Make : Havells Cat Part No LHEXAPP7PN1W020. |
| 123 | S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire complete all as specified and directed.Make : Havells Cat Part No LHEXACP7INW10. |
| 124 | S&F in repair of recessed mounted 36 Watt (clear white) LED panel light2x2 feet, ultra slim design, 230 volts, 50 Hz with CRCA sheet housing precoated white colour and high quality diffuser for uniform light and high efficiency with separate replaceable electronic driver including lamp complete all as specified and directed.Make : Havells Cat Part No LHEBAEP7IW036. |
| 125 | M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts gradewith stranded copper conductor includingone run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit with and including taking down unsv sub main complete all as specified and directed.Note : (i)PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’.(ii)Two run of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length). |
| 126 | Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 127 | M&L for repairing / sevicing of exhaust fan 300 mm sweep by replacement of bearing, capacitor, gun metal bush including taking down from wall and fixing to its original position after repair complete all as specified and directed. |
| 128 | M&L for taking down of geyser of any capacity from suface/wall including fixing to its origainal position with inlet and outlet connection complete all as specified and directed. |
| 129 | S&F for Sheet metal enclosures with socket two pin and earth plug top and MCB SP-20 Amp 230 volt complete all as specified and directed. |
| 130 | S&F for Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators complete with and including taking down old unsv one complete all as specified and directed. Make : Legrand cat No 607711/ Hager Cat No: VYS08D/ C&S Cat No:CSDBSPNDD08. |
| 131 | S&F for MCB, Single pole & neutral,5 to 32 amps, 240 volts, ‘C’ curve, 10KA allcomplete with and including taking down old unsv one complete all as specified and directed. |
| 132 | S&F for MCB, Single pole, 5 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete with and including taking down old unsv one complete all as specified and directed. |
| 133 | Taking out of old air termination rod of any type and any size from building including dismantling and removing (except serviceable strips for re-fixing) materials from work site complete all as specified and directed. |
| 134 | S&F for air termination single pointed, copper rod 12mm dia and 300 mm long fixed on galvanised iron pipes with copper strip for earth conductivity to ground complete all as specified anddirected. Note: MS /PCC work shall be measured and paid seperately. |
| 135 | Taking down old Copper Strip of any size and any type from building (roof/down conductor)/ pipe/ trench including dismantling and removing (except serviceable strips for re-fixing) materials from work site complete all as specified and directed. |
| 136 | S&F for copper strip 20mm x 3mmwith fixing screws for conductors/ earth lead including brazing and nut bolts jointing at all joints for building/ equipment laid through pipe/ trench/ surface complete all as specified and directed. |
| 137 | Re-fixing of old serviceable (serviceable strips as obtained from taking down) Copper Strip of any size and type after straightening & dressing for fixing and making good to disturbed strip complete all as specified and directed. |
| 138 | S&F in replacement of saddle/insulator for refixing of earth strip with fixing arrangement in roof/ wall conductors of building/ hangar complete all as specified and directed. |
| 139 | Taking out of old unserviceable test point terminal block of any type and any size including dismantling and removing materials from work site complete all as specified and directed. |
| 140 | S&F for gun metal black or phosphorus bronze size 75mm x 75mm x 25mm drilled screwed including 3 Nos, 8mm dia and 25mm long neckhead screws including MS box 2mm thick of suitable size for protection of test point terminal complete all as specified and directed. |
| 141 | M&L for earthing complete with copper plate 600mm x 600mm x 3.15mm thick electrode and 20mm x 3mm copper strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to copper strip 20 x 3mm as earth lead by means of tinned copper/ brass bolts, nuts, check nuts and washers (including brazing) connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. |
| 142 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr deep for taking out/ laying of under ground cable, pole, pipe, stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed. |
| 143 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm spread any type of soil complete all as specified and directed. |
| 144 | Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and directed. |
| 145 | Disconecting pipe lines connections, taking down carefully the old rusted and leakage pressed steel plates to the ground for replacement works of size 1.25m x 1.25m x5mm/1.25m x 3.75 m x 5 mm including jointing materials (i e) lead wire/wool Putty/compound etc from 10000 Gallons capacity PS over head water tank installed on 40 to 50 fits height staging complete all as specified and directed. |
| 146 | S&F for testing and commessioning pressed moulded thermosetting GRP water tank (IS-14399) of size 5mx4mx2m(H) including manhole panels on the roof with proper locking arrangement fixed at any position installed on 40 to 50\" height staging with required number of holes on the plates & other all required joining materials te lead wire/wool,putty/compound etc to make the jointing portion absolutely leak proof complete all as specified and directed. Note:- Cost for arrangement of staging/ working platform is deemed to be included in the item quoted rate. |
| 147 | Supply, laying, jointing and testing mild steel galvanised water tubing 80 mm bore, medium grade including all GI fittings & flangesfitted to 10,000 gallons capacity PS over head water tank installed at 40\" to 50\" height staging includingpainting in inlet & outlet pipe line with necessary colour coding with one coat of synthetic enamel paint including taking out old complete all as specified and directed. Note:- Cost for arrangement of staging/ working platform is deemed to be included in the item quoted rate. |
| 148 | All as per item No. 147.00 above but pipe of 100 mm bore complete all as specified and directed. |
| 149 | Cutting of existing CI/ GI pipe 80 mm in position for insertion and including of new tee of size 80 mm complete all as specified and directed. |
| 150 | Cutting of existing CI/ GI pipe 100 mm in position for insertion and including of new tee of size 100 mm complete all as specified and directed. |
| 151 | S&F in replacement of cast iron sluice valve of 80mm bore, class PN 1.6, ISI marked with iron wheel head both end flanged, brass spindle any pattern with check nut complete with jointing material nut, bolt and washers etc complete all as specified and directed. |
| 152 | All as per item No. 151.00 above but valve of 100 mm bore complete all as specified and directed. |
| 153 | Taking down old GI/MS pipe with fitting of 80/100 mm bore from surface/ trench including dismantling and removing (except serviceable pipe for re-fixing) materials from work site complete all as specified and directed.Note:- Earthwork shall be measured & paid separetely. |
| 154 | Supply, laying, jointing and testing mild steel galvanised water tubing 80 mm bore, medium grade including all GI fittings laid in trenches/ wall/ surface complete all as specified and directed.Note:- Earthwork shall be measured & paid separetely. |
| 155 | Supply, laying, jointing and testing mild steel galvanised water tubing 100 mm bore, medium grade including all GI fittings laid in trenches/ wall/ surface complete all as specified and directed.Note:- Earthwork shall be measured & paid separetely. |
| 156 | M&L for construction of valve pit chamber ofinternal dimension 90 x 90x 90 cm with sub class \"B\" bricks in cement mortar (1:4) and 10 mm thick plastering in cement mortar (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 6 mm angle iron 5 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete including dismantling of old complete all as specified and directed. |
| 157 | M&L for mild steel bracing/ channel/ angle iron support fabricated from structural steel sections including MS Nuts, bolts and washers with necessary welding, bending cold or hot, drilling holes for bolts in any shape or size for overhead tank on height of 40\" to 50\" including two coats of aluminium paint over one coatof primer complete includingall as specified and directed. Note :- This item will be used for adn/altn of existing ledder of OH tank. |
| 158 | Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410-W (Gde E- 250) quality A (for Tank base) complete all as specified and directed. Note :- This item will beused for adn/altn of existing platform of OH tank. |
| 159 | Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen (for path on tank staging) complete all as specified and directed. |
| 160 | Running welding in repairs Exc 6 mm but Exc 9 mm complete all as specified and directed. |
| 161 | M&L for PCC 1:2:4 type C2 using 40 mm graded stone aggregate for foundation complete all as specified and directed. |
| 162 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
