|
| 1 | Material and labour for seamless plaster gypsum board false ceiling comprising of Gl frame work with Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI adjustable strip suspenders up to 1200mm long fixed to roof slab(using concrete drill) by suitable GI fasten with and including panel for ceiling (12mm thick Plastergypsum board seamless 1200mmx1800mm size) with self-tapping screw finishing covering the joints with fiber tape and ceiling compound 48 mm wide fibre tape to provide seam less finish and applying two coat of oil bound distemper of any pattern and design over a coat of texture primer on ceiling sheet as specified (particular specification 31 ) completely all as specified and as directed by Engineer-in-charge.Note: The rate is inclusive of frame work, POP panel and surface finish nothing extra shall be paid on this account |
| 2 | Demolition of brick or stone PCC block masonry built in cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles in any position complete all as specified and as directed. |
| 3 | Material and labour for precastPCC 1:3:6 using 16 mm graded aggregate solid block masonryexceeding 10 Cm width, built in cement mortar 1:6 all as specified and as directed. |
| 4 | Material and labour for precastPCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonry10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed. |
| 5 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed. |
| 6 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 7 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:4, finished even and fair without using extra cement complete all as specified and directed. |
| 8 | M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick birla putty punning including finishing bySanding Machine and Auto Roller new surface complete all as specified or as directed by Engineer-in-charge.Make: Asian Paint (Tractor)/Berger paints (Bison super) |
| 9 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces, complete all as specified and directed. |
| 10 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on ceiling surfaces, complete all as specified and directed. |
| 11 | Material and Labour two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding |
| 12 | Taking down chowkats or frame exc 1.50 sqm each but not exc 4 sqm each with shutters (without taking off shutters from the frame ) complete all as specified and directed. |
| 13 | Material and Labour for providing Dark colouredfinish uPVC profile casement Doors/ windowsprofile frame consist of high impact modified grade uPVC of 65mm x 73mm (outer frame) and sash of 65mmx105mm, wall thickness of profile must be minimum 1.8±0.3mm, which shall be manufactured from tropicalized blend with TiO2 and required additives, Profile shall be colorfast and conform to standard EN12608, profile sections shall have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber, the thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion and minimum steel reinforcement thickness of 1.2mm to 2.5mm, UPVC casement Doors/windows shall be fabricated with fusion welded corners andconform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted must be stainless steel except handles to be of zinc/Aluminium, alloy casted with powder coated. Glass shall be of laminated(6T+1.23pvb+5T )8mm clear toughened Glass with weather seal (EPDM/TPE). UPVC casementDoors/windows shall be installed by profile manufacturer only, Fame fastener 8x100mm type shall be used complete all specified and as directed by Engineer in Charge.Make: Fenesta or equivalent. |
| 14 | Supply and fix 10mm thick toughened glass crystal polishedin squares exceeding 0.5 Sqm in each pane as in cubile panel/working table top, fixed with suitable adhesive complete all as specified and as directed. |
| 15 | Material and Labour for acoustical wall panelling for conference room slotted(2-5mm wide) groove type(SL8-30-20)surface melamine/naturalvenner with effectively sound reducing, panelling 18mm thick ,core material of MDF/Red MDF /NF golden core /MGO of size 2400mmx1200mm/2400mmx 600mm/1200mm x 600mm:class A or B) NRC:0.90 with asthetic appeal offering a stylish and effecient way to manage sound,including necessary aluminium grid frame and fittings etc, as approved pattern.complete all specified and directed by EIC |
| 16 | Supply and fix of push back slider chairssize 21\"-22\" customised design type two legged one person seating capacity for AD-21 auditorium/public seating chair as desired colour and design directed by Engineer In charge and approved pattern complete all as speicifed .Brand :AD-21/wipr/KQ chair |
| 17 | Providing and fixing laminated wooden flooring with mirror polished teak wood finish with AC4 grade 12mm thick as directed on existing surface of approved makequality shade ,having high pressure laminated surface of 0.3 mm thick with surface guardcare material of high density fibre board flooring planks having click joint system (tongue and groove joint) joint sealingwith wax as per manufactures specifications, properly finishing the exposed edges and T moulding provided at the juction at laminated flooring and vitrifiedtiles, including skirting,corner profile ,door profile complete in all aspects,including floor stage work with stainless steel tubes size 50x25x5mm thick and with 18mm thick marine plywood as directed by Engineer In chargecomplete all as specified and directed .The rate including leveing of existingfloorwith cement sand mortar and cement slurry brand :Action tesa, Amstrong,kahr, Ego,Vista |
| 18 | Material and Labour for Granite 18 to 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite including rounding the edges and laidover and including 20mm thick cement mortar 1 :6 complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed. |
| 20 | Material and Labour for glossy finish coloured Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.42 sqm and notexceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 20mm thick in CM 1:6 complete all as specified and as directed. |
| 21 | Material and Labour for Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.36 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 20mm thick in CM 1:6 complete all as specified and as directed. |
| 22 | M & L for point wiring with PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade, FRLS of size 1.5 Sqmm drawn in and including PVC rigid conduit of size not less than 20mm dia with accessories (concealed) including modular metal flush box of suitable size with inner and outer white plastic plate (same make of switch and socket) including continues 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694 for the following(c) One 3pin socket outlet 6 Ampson Independent board |
| 23 | (d ) One 3pin socket outlet 6 Ampsonsame board |
| 24 | All as per Item No. 22 above but with 4 sq mm PVC insulated copper conductor cable(FR) including 4 sq mmPVC copper conductor used as earth wirefor power point on independent board for One 3 pin socket outlet, 15 Amps. |
| 25 | Supply and fixing Modular switchsocket outlet, 5 Amps, 3 pin flush type complete all as specified and directed. |
| 26 | Supply and Fixing Modular switch socket combination 16 A 6 pin 3 Module complete all as specified and directed. |
| 27 | Supply and fix MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. |
| 28 | Supply and fix MCB SPN 40 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 29 | Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 4 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer flush to wall complete all as specified and as directed. |
| 30 | Material and labour for submain wiring using two run of sinlge core PVC insulated cable (FRLS) 6 Sqmm copper conductor multi stranded and 6 Sqmm copper conductor insulated cable (FRLS) using as earth wire drawn through and including PVC rigid conduit of size not less than 25mm dia with accessories (concealed) complete all as specified and directed |
| 31 | Supply and fixing of addressing system/ video/ Audio conferencing system comprising the following components: -(a) Supply & install of 133-inch fixed frame projector screen 1:1,16.10 High gain WUXGA/4K video supported aluminium fixed frame, Make Suvira, model SVR-FIF133-01 No.(b) Supply & installation of Lazer Projector WUXGA/4K 3LCD, 4600 Lumens, 3LCD Lazer projector with WWUXGA/4K enhancement resolution, 20,000 hours lamp life, Make panasonic, model PT-LMZ4600-01 No |
| 32 | (c) Supply & installation of full range wall mount speaker. 40W Rated, 160W Peak Power Rated Full Range In-Ceiling speaker for conference Room Applications, Make - Bose, model FS4SE - 06 No.(d) Supply & Installation of DSCP Zone Amplifier. 2x120W Mixer Power Amplifier, with analog and Aux input and bose speaker equilizers, Make -Bose, model IZA-2120-HZ-01 No.(e) Supply & Installation of analog audio mixer. 06 channel analog audio mixer XLR/RCA inputs and outputs, Make - Yamaha, model MG06-01No. (f)Supply & Installation of wireless presenter microphone set. wireless collar/lavilier microphone ser, Make - AKG, model WMS40 Presenter Mic Set-01 No(g) Supply & Installation of wireless handheld microphone set. wireless handheld mircophone set, Make -AKG, Model WMS40 Handheld Mic Set - 01 No. |
| 33 | (h) Supply & Installation of projector celing mount. in ceiling projector mount with all required accessories, Make -Lumi, Model Proj_M - 01 No.(i) Supply & Installation of 4K HDMI cable. 4K supported, 18Gbps active optical fibre HDMI Cable, Make -VCOM, Model 15M-AOC - 01 No(j) Supply & Installation of 1.5 Sqmm OFC Speaker Cable. 1.5 Squre mm 16AWG oxygen free pure copper speaker cable, 100 Meter Roll, Make - Krystal, Model 16-2C - 01 No.(k) Supply & Installation of all in one 4K Video conference Camera. 4K-Dual-eye tracking 20X camera for medium and large conference rooms with built in dual 4K camera and Al-driven features like presenter tracking, speaker tracking, auto framing and picture in picture, Make -Yealink, Model UVC 86-01 No.(l) Supply & Installation of expansion microphone for video conference system. 360 degree wireless microphone with HD audio, full duplex technology WPA2 Encryption technology, acoustic echo cancelling & built in 2450 mAh battery, Make - Yealink, Model VCM36W - 03 No.Read: \"SPN 4 way\" |
| 34 | The above components are required to be fixed in their suitable places as per the guidance, instructions of manufacturers units and all as directed. The components are required to be fixed in a manner so that its cable/ wires are concealed. the contractor shall be responsible for efficacy of working of all these units in an effective way. The contractor shall submit the original purchase vouchers of these units along with its warranty/ guarantee certificate to the Engr-in-Charge and on receipt of any complaints, he shall attend the same immediately in consultation with the dealers thereof by employing highly skilled technicians |
| 35 | Schedule of Credit (Minus) Rs.1200NOTE der shall insert credit amount of Rs. 1200.00 as ratein Green field under Col-13. |
