Tender For Construction Block-1, Repair Work Of Roof And Building Of Office Building Of Pwd Etah (Electrical Work) - Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable Rec, aligarh-Uttar Pradesh

Tender For Construction Block-1, Repair Work Of Roof And Building Of Office Building Of Pwd Etah (Electrical Work) - Wiring for light point/Fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable recessed medium class PVC conduit with modular type switch, modular plate, suitable GI box and with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required 2 Supplying and Fixing 3 pin 5 A ceiling rose on the existing junction box including connections etc as required 3 Supplying and Fixingbrass batten/angle holder including connections etc as required 4 Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etcas required 5 Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required( 20 m for all plug points). 6 Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 A modular socket outlet and15/16 A modular switch connections etcas required 7 Supplying and drawing of 1x1.5 sqmm of FRLS PVC insulated copper conductor, single core (multi stranded) cable .for Inverter in the existing surface/ recessed steel/ PVC conduit as required. 8 Supplying and fixing 4 way (4+12) double door horizontal type three pole and netural ,sheet steel , MCB distribution board 415 V on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) 9 Supplying and fixing 8 way double door single pole and netural ,sheet steel , MCB distribution board 240 V on Surface/recess complete with tinned copper busbar, neutral bus bar ,din bar , interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Insultor) 10 Supplying and fixing 5 A to 32 A rating 240/415 V 10 kA C Curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as requiredsingle pole 11 Supplying and fixing 40 A rating double pole 240 V insulatorin the existing MCB DB complete with connections testing and commissioning etc as required 12 Supplying and fixing 63 A rating fourpole 415 V insulatorin the existing MCB DB complete with connections testing and commissioning etc as required 13 Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x2.5 sqmm +1x2.5 sqmm earth wire 14 Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x4 sqmm +1x4 sqmm earth wire 15 Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 2x10 sqmm +1x6 sqmm earth wire 16 Wiring For circuit /submin wiring alonwith earthwire the following sizes of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required size 4x16 sqmm +2x6 sqmm earth wire 17 Supplying and Fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required 18 Supplying and fixing call bell/buzzer suitable for single phase 230 V complete as required 19 Earthing with G I earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 20 Providing and fixing 25 mm X 5 mm G I strip on surface or in recess for connections etc. as required. 21 S/Fofwater tight oblong 10 watt LED bulkhead luminare having pressure die cast housing with driver set confirming to IP 65 and above protection IK08UVstablised non yellowish diffuser 1200 system lumens>120 Lm/W PF>0.95THD< 10%at full load CRI>70>300 volt over voltageprotection 4 KV internal surge protection with 5 years warrantyCAT- AAA 22 Installation testing and commissioningof ceiling fan including wiring the down rod of standard length with 1.5 sqmm FRLS PVC insulated copper conductor single core cable as required. 23 Installation of exhaustfan in the existing opening including making good the damage connection testing commissioning etcas required.upto 450 mm sweep 24 Supplying Installation Testing and commissioing of 1200 mm sweep BEE 5 star rated ceiling fan with brush less direct currentmotor class of insullation B 3 nos blades 30 cm long down rod 2 nos canopies shackle kit sagety rope copper winding power factor not lesss than 0.9 service value (CM/M/W) minimum 6.00 air delivery minimum 210 Cum/Min 350 rpm THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin nut bolts washers temperature rise 75 degree C max. insulation resistance more than 2 mega ohm suitable for 230 V 50 Hz single phase AC supply earthing etc complete as required 25 Supply/Laying of alminuam condactor PVC insulated armoured serbed sheathed cable 1100 V grade on surface size 10 sqr mm 4 core. 26 S/making end termination withbrass compression glandand aluminium lugs forsize 16 sqmm 4 core 27 S/F of LED tube light with heavy duty metal box type tube light fitting 1X22watt suitable for upto 1x22 watt LED polycarbonate tube light complete including tube suitable for both surface and suspendedetc.on surface.complete in all respect.2620 system lumens>120 Lm/W PF>0.95THD< 10%at full load CRI>80 sheet thickness min 0.8 mm Tube with aluminium heat sink >300 volt over voltageprotection2.5 KV internal surge protection with 5 years warrantyCAT- AAA 28 S/F of LED street light fitting with mandatory driver set having die cast Al body and diffuser with glass UV PC cover and lensessuitable for 45 watt to 50 watt. Confirming upto IP66 and IK07 and aboveptotection having company logo and Complete in all respect including labour high power led with lenses 120 Lm/W PF>0.95THD< at full load CRI>70 potted driver setin metal housing phase to phase protection at 440V over voltage auto cut and restart feature 4KV internal surge protectionwith 5 years warrantyCAT- AAA 29 Supplying and fixing of 63 Amp 415 V Heavy duty double break HRC type switch fuse unit with HRC fuse unit etc. 30 Supplying and fixing of 63 Amp 415 V four pole changover switchunit etc. 31 S/F of Fresh Air Fan fan 300mm sweep in size. 32 Supply and fixing LED Bulb 9 watt lumen 810 to 945 complete in all respect. 33 S/F of lug 4 sqmm 34 S/F of lug 16 sqmm 35 S/F of Computer board having 1 no 15 Amp switch socket and 3 nos 5 Amp switch socket on GI switch box 300x250x50mm 36 add inverter wiring in wiring point for light/fan/fresh air fan etc 37 S/F of hexagonal fan boxes 38 S/F of 16 swg MS drum including making hole in the wall

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	01-07-2025	Other	Other	02-07-2025

INR 677 /-

INR 30000.0 /-

INR 2.93 Lakhs /-