Arc For Execution Of Emergency Civil Work Under Valsad Rural Division; 1 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 129.10 Cumt 2 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete (upto 10 ton) 455.63 Cumt 3 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (upto 10 ton) 286.20 Cumt 4 Add extra for Disposing off the excavated stuff of above items for lead of (E) 400 to 500 m 128.00 Cumt 5 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 115.92 Cumt 6 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 148.35 Cumt 7 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 160.95 Cumt 8 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand brokenstone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton) 2653.67 Cumt 9 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton) 3646.87 Cumt 10 Providing TMT Bar FE 500 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton) 75.46 Kg 11 Providing and laying controlled cement concrete M.150exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M 9075.60 Cumt 12 Providing and laying controlled cement concrete M.150exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in(B) COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 11432.85 Cumt 13 Providing and laying controlled cement concrete M.200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M 10656.09 Cumt 14 Providing and laying controlled cement concrete M.200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M 12064.80 Cumt 15 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - fine sand)(C) Fly Ash Bricks (upto 10 ton) 4305.40 Cmt 16 Extra for brick work in superstructure above plinth level upto floor two level(C) Fly Ash Bricks 272.25 cmt 17 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash Bricks (upto 10 ton) 632.46 SMt. 18 Extra for half brick masonry in superstructure above plinth level upto floor two level. (C)Fly Ash Bricks 52.64 smt 19 Providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled. (upto 10 ton) 3034.10 Sqmt 20 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. (upto 10 ton) 103.01 Kg. 21 Providing and fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. Size including 3 coats of oil painting to wood work etc.complete. (upto 10 ton) 4102.54 Sqmt 22 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled. 5285.45 Sqmt 23 Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture, M.S. frame shall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet beading on eighter side, and joined together with solvent cement adhesive,. An additional 5mm thick PVC strip of 20mm width is to be stculk on the interior side of the ‘c’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer in charge, manufacture’s specification and drawing. 1135.02 Sqmt 24 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like (upto 10 ton) 89.58 Kg. 25 Providing and fixing in position callapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat of read lead paint. (upto 10 ton) 5728.28 Sqmt 26 Providing and fixing extruded aluminum window having extruded aluminum Colour Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384 Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical member of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per 2119.14 Sqmt 27 Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (upto 10 ton) 1078.88 Sqmt 28 Providing and laying cement concrete pavement (25mm to 50mm thick) with 1:2:4 (1-cement : 2-coarse sand : 4- stone aggregate 20mm nominal size) including finishing with floating coat of neat cement complete. (upto 10 ton) 4379.12 Cumt 29 P & L 24 x 24 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade (upto 10 ton) 1383.99 Sqmt 30 Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick w ith grade of concrete M300 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete. 680.10 Sqmt 31 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton) 960.47 Sqmt 32 Providing and laying Marbo Grenite tiles 8 to 10 mm thick , 24 x 24 in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton) 1062.50 Sqmt 33 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- coarse sand) and jointed with white cement slurry (upto 10 ton) 1063.27 Sqmt 34 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- coarse sand) and jointed with white cement slurry (upto 10 ton) 1028.11 Sqmt 35 Providing and laying Marbo Grenite tiles 8 to 10 mm thick , 24 x 24 in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton) 1130.15 Sqmt 36 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1- cement : 6- coarse sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick (upto 10 ton) 1019.03 Sqmt 37 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton) 908.17 Sqmt 38 Providing asbestos cement sheets roofing fixed with G.I J or L hooks, bolts & nuts 8mm dia. C.I. plain and bitumen washer complete excluding the cost of purlins, fagters and trusses. (A) Corrugated sheet (i) 7mm thick (upto 10 ton) 375.00 Sqmt 39 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. (upto 10 ton) 719.93 Sqmt 40 Providing and fixing ridges and hips in asbestos cement sheets roofing with G.I. J or L hooks, bolts and nuts 8mm dia. G.I. plain and bitument washers complete. (D) North light adjustable ridge. 149.00 Rmt 41 Providing and fixing five courses water profing treatment with bitumen felt consisting of second and fourth course of blown / bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base bitunen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre including preparation of surface excluding grading complete. (upto 10 ton) 466.84 Sqmt 42 Providing and fixing and embedding sand, C.I. rain water pipes in the masonry surrounded with 12mm thick cement mortar of the same mix as that of masonry. (A) 75 mm dia pipe. 291.38 Rmt 43 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in charge. 1427.62 Sqmt 44 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm 1632.63 Sqmt 45 Providing and fixing single layer waterproof gypusm board 12.5 mm thick of the make Newgood Group Co. Ltd. or equivalent & Newgood Group Co. Ltd. company sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm suspended by G.I suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimetre chanel A of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops including paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for light fitting, diffuser etc. complete as per detail drawing as directed. 600.94 Sqmt 46 Extra for finishing with a floating coat of neat cement slurry. (upto 10 ton) 47.73 Sqmt 47 Extra for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on walls. 24.57 Sqmt 48 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 297.68 Sqmt 49 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. 23.45 RMt. 50 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1- cement:3-sand) 170.10 Sqmt 51 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. 11.19 Sqmt 52 Extra for removing dry oil bound distemper on ceilings and sloping roofs. 1.58 Sqmt 53 Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an approved brand and manufacture and of required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. 57.33 Sqmt 54 Wall painting (two coats) with plastic manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered mooth. 79.55 Sqmt 55 Extra for every subsequent coat of wall painting with plastic emulsion pain of approved brand. 40.12 Sqmt 56 Extra for painting with plastic emulsion paint of approved brand on ceilings and sloping roofs. 5.36 Sqmt 57 Extra over item 59 for every subsequent coat of painting with plastic emulsion paint on ceiling and slopping roofs. 2.21 Sqmt 58 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 34.34 Sqmt 59 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. 86.94 Sqmt 60 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. 87.42 Sqmt 61 Polishing with french polish on previously polished wood and wood based surface to give an even surface including cleaning, the surface of all dirt, dust and sand papered smooth and including a coat of wood filler. 82.38 Sqmt 62 Appliying wax polish on previously wax polished wood and wood based surface with bees wax polish in proportion of 2:1.5 :1:0.5 (2-Bees wax : 1.5 Linseed oil : 1- Turpentine : 0.5 varnish by weight to give an even surface including cleaning the surface of all dirt dust and sand papered smooth. 35.60 Sqmt 63 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 113.40 Sqmt 64 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 40.19 Sqmt 65 Appliying priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (B) Ready mixed paint brushing wood primier pink. 39.69 Sqmt 66 Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid for separately) (ii) Indian (Letters/Figures) 3.47 Per Letter per cm/Ht 67 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C work 1047.38 Cumt 68 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 47.73 Sqmt 69 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of pipe) 74.34 Rmt 70 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift. 401.63 No. 71 Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping.) 48.83 Sqmt 72 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift 19.38 Sqmt 73 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The ridge shall be fixed to the steel members by pop rivet or self drilling/self stitching fastners @ maximum 450 mm c/c along length of capping/flashing etc complete . 510.10 Rmt 74 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. 524.48 Cumt 75 Demolition and disposal of unserviceable materials with all lead and lift.(i) Cement concrete. 603.23 Cumt 76 Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. 544.95 Cumt 77 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 47.73 Sqmt 78 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing. 52.92 Sqmt 79 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 248.85 Each 80 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The ridge shall be fixed to the steel members by pop rivet or self drilling/self stitching fastners @ maximum 450 mm c/c along length of capping/flashing etc complete . 850.17 Sqmt 81 Providing and fixing M.S. fan clamps of shape and size as specified in existing R.C.C. slab including cutting chase and making good. 166.95 no. 82 Carring out timber treatment to all wood work including drilling holes and spraying oil based chemical solution on surface of timber work for termite control including labour and material etc. complete. Using Chlordene 20 EC. As Per 6113_part III Consentration Weight 1.00 percent is recommended one litre chemical emulsion dillute with 9 liter of kerosene precent concentration. Total dillute concrentration will be 10 litre inclusive of the litre chemical emulsion appication 0.75 / Litre chemical per one Sqmt printed two coat wood surface. 56.70 Sqmt 83 Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S 88.40 Sqmt 84 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is ecommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S 123.05 Sqmt 85 Carrying out wall treatment for termite control including spraying with chemical solution in oil base (0.5 Lit./ Sq.M.) including labour and material Using Hepachlor concentration 20 EC. As Per IS. 6316_paret-II Consentration byWeight 0.50 percent is recommended i.e one litre chemical emulsion dillute with 39 liter gof IS concrentration total dillite concentration will be 40 litre inclusive of one litre chemical emulsion appication at the rate of 7.5 Litre chemical / Sqm of surface is recommended as per I.S 41.90 Sqmt 86 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capaRural each with all necessary fittings and connection etc. complete on terrace. 3.91 Ltr 87 Providing and Fixing 12 mm thick moisture & fire resistant heavy duty Cement Fibre Board (High pressure steam cured) Confirming to ISO 4862-2000 in wall panels of one face of cold formed galvanised light gauge steel frame structure to form wall / partition as & Where directed by Engineer-in-Charge 715.50 Sqmt 88 Supply & fixing factory finished cold formed Light guage steel frame sections confirming to SP:6 (5) 1980 at site or work including riveted, bolted or welded in builtup for all type of sections ,in framed work, cutting, hoisting, fixing in position and applying primer coat of approved steel primer etc. complete as per structural designs & directions of Engineer-in-charge. 113.31 Kg 89 Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia. 600.08 No. 90 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour 930.83 No. 91 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1- fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour 1290.80 No. 92 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour 2321.21 No. 93 Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. 288.45 No. 94 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. 1491.53 No. 95 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size 2257.69 No. 96 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. 825.48 No. 97 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. 597.22 No. 98 Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. 1535.63 No. 99 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 100.90 No. 100 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 71.93 Rmt 101 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 90.93 Rmt 102 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 117.97 Rmt 103 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. 828.45 Rmt 104 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. 565.43 No. 105 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(B) 20mm (upto 10 ton) 297.25 Rmt 106 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(C) 25mm (upto 10 ton) 393.93 Rmt 107 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(D) 32mm (upto 10 ton) 491.51 Rmt 108 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(E) 40mm (upto 10 ton) 596.73 Rmt 109 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately)(A) 15mm (upto 10 ton) 150.91 Rmt 110 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately)(B) 20mm (upto 10 ton) 190.97 Rmt 111 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately) (C) 25mm (upto 10 ton) 279.39 Rmt 112 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately)(D) 40mm (upto 10 ton) 421.12 Rmt 113 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately)(E) 65mm (upto 10 ton) 716.66 Rmt 114 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earthwork in trenches to be measured and paid for separately)(H) 80mm (upto 10 ton) 910.69 Rmt 115 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special flange compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(A) 20mm 78.12 Rmt 116 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(B) 25mm 100.97 Rmt 117 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(C) 32mm 122.07 Rmt 118 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(D) 40mm 145.18 Rmt 119 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(E) 50mm 187.33 Rmt 120 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm 274.68 Rmt 121 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm 332.91 Rmt 122 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton) 1279.40 No. 123 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 67.24 No. 124 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. 184.98 No. 125 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (ii) 20mm dia. 212.68 No. 126 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. 184.98 No. 127 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (ii) 20mm dia. 212.68 No. 128 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia. 157.29 No. 129 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (ii) 20mm dia. 176.09 No. 130 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. 305.67 No. 131 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (ii) 20mm dia. 351.18 No. 132 Providing and fixing brass screw down stop tap.(A) 15mm dia. 203.79 No. 133 Providing and fixing brass screw down stop tap.(B) 20mm dia. 221.59 No. 134 Providing and fixing brass screw down stop tap.(C) 25mm dia. 218.63 No. 135 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. 184.98 No. 136 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. 201.80 No. 137 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. 416.47 No. 138 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. 311.61 No. 139 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. 656.86 No. 140 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia. 252.26 No. 141 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia. 261.16 No. 142 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(iii) 32mm dia. 273.03 No. 143 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia. 131.57 No. 144 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia. 187.96 No. 145 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (i) 25mm dia. 101.89 No. 146 Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia. 136.52 No. 147 Providing & Fixing & laying file box with necessary materials ,18mm ply wood teakwood patti with or with out shatur, or vetrical bars and Handle,Lock if required. and oil painting etc complete as directed by EIC.(All materials to be braught by contractor at his own cost of approved quality etc complete as directed ) 400.00 Cft 148 Providing fitting & fixing partly glazed anodised aluminium partition using extruded section fabricated by standard manufactures with framing 7.15cm x4.45cm rectangular section & door shutter /panel of partition made from 6.0 cm x 3.75cm aluminium bottom section top & vertical section 6.00x3.75cm size using 5.5mm thick Trivenior HB4 plain glass with glazing deep rubber gasket & hard laminated sheet 3 mm thick panel with door arrangement & locking arrangement(Godrej type) with all fixtures & fastenings of anodised section with aluminium frame mounted door closer with all labours & materials etc. Complete as per drawing and as directed by E.I.C. 2700.00 Sqmt 149 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(A) 15mm (upto 10 ton) 242.55 Rmt 150 Providing & laying ( to level or slopes) and jointing with stiff mixture of cement mortar in proportion 1:1, stone ware pipes of the following internal diameter with collers and butt ends prepared for collar joints including testing of joints ,making water tight joints , curing etc., complete as directed by E.I.C. 302.11 Rmt 151 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (upto 10 ton) 2903.89 No. 152 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets. (upto 10 ton) 3624.51 No. 153 Providing laying (to level or slopes) and jointing reinforced concrete Light duty nonpressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm (upto 10 ton) 246.21 Rmt 154 Providing and laying China mosaic type water proofing treatment on terrace including ( a) applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing compound after cleaning the surface . (b) laying cement concrete using brick bats 25 to 100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound over 20mm thick layer of c.m. 1:5 to required slope including rounding of junction of walls and slabs. (c) After two days of proper curing , applying a second coat of cement slurry. (d) Finishing the surface with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the surface with trowel with white cement slurry. (e) after finishing the whole terrace shall be flooded with water for a period of two weeks. 625.00 Sqmt 155 Providing fitting & fixing fully glazed/ partly glazed double leaf anodised aluminium entrance door using extruded section fabricated by standard manufactures with framing 10.15cm x4.45cm rectangular section & door shutter made from 10.15 cm x 4.45cm aluminium bottom section top & vertical section 15x4.45cm size using 5.5mm thick Trivenior HB4 plain glass with glazing deep rubber gasket with locking arrangement(Godrej type) with all fixtures & fastenings of anodised section with aluminium bedding floor spring mounted door closer with all labours & materials etc. Complete as per drawing and as directed by E.I.C. 2600.00 Sqmt 156 Providing fitting & fixing Door closure Godrej make or equivalent as approved by EIC.Rate taken as per market rate 1500.00 No. 157 Providing & Fixing Verrticle blinds incl. necessary fixtures channel chain and material. 135.00 Sq.ft 158 Providing & Fixing Rollar Blinds incl. necessary fixtures channel chain and material. 190.00 Sq.ft 159 S.S. Handle for Door 15 Cm size of ASIS 304 Grade 89.00 No. 160 Latch ANODISED allumin. 250mm long 10 mm dia. 63.00 no. 161 Rubber stopper for door 48.00 No. 162 S.S. Aldrop 25 Cm long of ASIS 304 Grade 383.00 No. 163 Chapras for cupboard Iron Size 3x6 (7.5cms x 15cms) 82.00 No. 164 Tentakora khataka lock 240.00 No. 165 M.S. best chromium plated Tower bolt : 150 mm. long 42.00 No. 166 Supply & fixing to doors & windows, ventilators, cup DGVCLs following fixtures & fastenings of approved quality with wooden or metal screws, nuts & bolts as directed or as per the drawing & specifications etc., complete as directed by E.I.C. 108.00 No. 167 Providing & Fixing a set of 6 nos. stainless steel coat rack of approved quality & make etc complete as directed by EIC 48.00 set 168 Miscellaneous items which are not included in above list and require to execute, shall be payable as per R&B SOR 2015- 16 for Valsad District and same shall be approved by EE Civil, Corporate Office. Rate for Non SOR items shall be counted as per the rate analysis approved by EE Civil, Corporate Office. As per requirement
