}

Tender For Repairs To Pues School North Facing Building At Kallipattu Panchayat, Cuddalore-Tamil Nadu

Rural Development And Panchayats Department has published Tender For Repairs To Pues School North Facing Building At Kallipattu Panchayat. Submission Date for this Tender is 26-06-2025. Building Work Tenders in Cuddalore Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

49816382
Tender For Repairs To Pues School North Facing Building At Kallipattu Panchayat
Tender
Indian
Tamil Nadu
Cuddalore
26-06-2025

Tender Details

Tender For Repairs To Pues School North Facing Building At Kallipattu Panchayat; 1 Dismantling and removal of flooring away from the site and including all labour charges etc, complete 2 Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. 3 Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) 4 Towards Door Repair OR Replacement workincluding cost and conveyance of all materials to site and all labour charges etc complete 5 Towards Window Repair OR Replacement workincluding cost and conveyance of all materials to site and all labour charges etc complete 6 Provision for a window leaf including all cost and welding fitting charges etc complete charges 7 Labour for cutting CRS angles welding and slab section 8 Bala Painting Special design Art work with first class quality emulsion paint including wall putty ,Primng coat etc.complete . etc., complete complying withstandard spcification. 9 Distembering two coats with best approved colour withPrimingCoatover the new plastered surface including cost and conveyance of all materials to site and all other labour charges etc complete.For INNER WALL and Ceiling 10 Painting TWO coats of Emulsion Paints with best approved first quality of cement paints of approved colour over the One coat of prime coat, etc., complete complying withstandard spcification. 11 Painting TWO coats of new/old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying 12 Painting TWO coats of Black Board paints with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying 13 Provision for Students Chapple Stand Per class room 2 Nos 14 Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete 15 Plastering with cement mortar 1:4mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc complete. 16 Distembering two coats with best approved colour withPrimingCoatover the 17 Towards cost and Supply of Cuddapah slab including all other chargesetc., complete complying 18 Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete 19 Plastering with cement mortar 1:4mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc complete. 20 Distembering two coats with best approved colour withPrimingCoatover the 21 Providing Cup-board Shutter with frame using termite / waterproof plywood of 19mm thick over which laminated sheet of0.8mm thick fixed inside the shutter and 1mm thick fixed inthe outsideof the shutter using fevicol along with necessaryfurniture fittings, such as, hydralic hinges, tower bolt,handles, multi purpose locks etc., as directed by theDepartmental Officers. The design pattern, water proofplywood, laminate sheet and other materials should be gotapproved from the Executive Engineer before use on work. 22 Labour wrought and put up in position Shutters for fullypanelled doors internal five plywood panels includinglabour charges for fixing furniture fittings complying withstandard drawings and standard specification. 23 Provision for lock and key 24 Towards cost and Supply of Cuddapah slab including all other chargesetc., complete complying 25 Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete 26 Plastering with cement mortar 1:4mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc complete. 27 Distembering two coats with best approved colour withPrimingCoatover the 28 Brick workin Cement Mortar 1:5 (One cement and five sand) using Country Bricks ground moulded of size 23 x11 x7cm. For the following including curing etc.,complete complying with standard specification.For Above Basement. 29 Plastering with CEMENT MORTAR 1:4 (one cement and four sand)12 mm. thick in all floor including curing etc.Complete complying with standard specification. 30 Colour washing with fine shell limeand colour pigments in two coats including all cost and conveyance etc complete 31 Towards Provision for Stainless steel Vessel 32 40W 4 Feet LED Fitting with LED 33 AC Ceiling Fan Complete 1400 mm (56) Sweep with 300mm Down Rod (without Regulator) 34 Provision for Name Board Charges 35 Provision for Photo Charges

Key Value

Document Fees
Refer document
EMD
INR 3740.0 /-
Tender Value
INR 3.74 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail