Tender For Construction Of Vocational Lab At Kv No1 Visakhapatnam; 2 Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard/dense soil all as specified and directed by Engineer-in-charge. 3 Excavation over areasNexc 1.5mdeep and getting out Hard/Dense soil complete all as specified 4 Excavation over areasexc 1.5m and n.exc 3.0m deep and getting out Hard/Dense soilcomplete all as specified 5 Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep for foundations, etc and getting out in soft/loose soil complete all as specified and directed. 6 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils in soft/loose soil 7 Removing Excavated soils exceeding 1.5Km but not exceeding 5 KM and depositing where directed 8 M & L for plain cement concrete (1:4:8), type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete. 9 M & L for form work to sides of concrete foundation, footing,plinth band, bases of columns etc. rough finished surfaces, flat. 10 M & L for form work to to sides of pillars, posts, struts, piers, columns and stanchions square, or rectangular complete all as specified. 11 M & L for form work to chullah hoods,chajjas, troughs and similar items including edges etc. rough finished surfaces, flat.. 12 M & L for form work to sides and soffits of floor or roof beams, lintels, cantilevers,shelves.including supports,overhangs, etcrough finished surfaces, flat. 13 Formwork to soffits of suspended slabs such as roof slabs, floor slabs,Staircaselandings and similar work; not exceeding 200mm thick (Horizontal or sloping) 14 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide 15 M&L for Reinforced Cement Concrete M-30 (using 20 mm graded stone aggregate) for foundations, footing, plinth beams, bases for columns etc. 16 M&L for Reinforced cement concrete M-30 ( using 20mm graded aggregate ) as in column, pillars, piers, posts and struts 17 M & L for reinforced cement concrete M-30 (using 20 mm graded stone aggregate) in chajjas 18 M & L for reinforced cement concrete M-30 (using 20 mm graded stone aggregate) in beams, cantilevers, lintels over 1.5 m span. 19 M & L for reinforced cement concrete M-30 (using 20 mm graded stone aggregate) in slabs suspended on walls, beams and columns in floors, roofs, Saircase landings and in shelves similar works. 20 M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. 21 M & L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. 22 M&L for PCC solid block masonry with C-5 grade solid units having density not less than 1800kg/cum as per IS 2185 Pt-I built in CM 1:6, exc10 cm in width and setting in mortar, complete all as specified and as directed. 23 Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth withut using extra cement complete all as specified and directed. 24 Rendering 5 mm thick on fair faces ofconcrete surfaces in cement mortar 1:3 and finishedeven and smooth without using extra cement complete all as specified and directed. 25 Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and 5mm thick in CM 1:4 mixed with WPC and finished fair and even without using extra cement complete all as specified and directed. 26 M & L for preparation of newly plastered surfaces ofinternal Celings and applying two coats of Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colourover a coat of alkali resistant primercomplete all as specified and directed. 27 M & L for preparation of newly plastered surfaces ofwalls and applying two coats of plastic emulsion paintover a coat of alkali resistant primercomplete all as specified and directed. 28 M & L forapplying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterir paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfacescomplete all as specified and directed. 29 M & L forProviding and applyingwall care putty nexc 3mm thick over plastered surface to prepare the surface even and smooth to walls 30 M & L forProviding and applyingwall care putty nexc 3mm thickover plastered surface to prepare the surface even and smooth to Ceilings 31 M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface. 32 M&L for 100 mm thick PCC 1:4:8type D2 (using 40 mm gradedstone aggregate) for sub base of flooring /hard standing including finishing the surface even and rough to receive the topping layer. 33 40 mm thick PCC 1:2:4 type B0 (Using 12.50mm graded stone aggregate) as in floors upto 4thstorey complate all as specified and directed 34 M & L for 50mm thick plain cement concrete type B1, (1:2:4) (using 20 mm graded stone aggregate) in flooring/plinth protection including finishing the surface even and smooth without using extra cement. 35 Virified Ceramic tiles double charged 10mm thick(square/rectangular) polished, area of each tiles exceeding 0.42sq.m but not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complate all as specified and directed 36 Screed bed or bedding layer of mortar 1:6, 15mm thick for laying floor finishes complete all as specified and directed 37 Coloured Glazed ceramic tiles350x450mm ,7 mm thick on vertical surfaces such as dadoscomplete all as specified and directed 38 Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and directed . 39 Brushing neat cement slurry with 3 kg of cement per square metre . 40 Rendering 10 mm thick on concrete surfaces in cement mortar 1:4 mixed with WPC as directed and finishedEven and smooth to receive water proof treatmentcomplete all as specified [NOTE: Supply only WPC shall be measured and paid separately] 41 Supply only Liquid water proofing compound complete all as specified and directed. 42 M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application including Applying evenly at tack coat of in dustrial bitumen 85/25 at 1.2 kg/sqm both at bottom and top of the membrane and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqmcomplete all as specified. 43 M&L 20mm Granite(of any type) work (table rubbed and polished) in flooring,window cills/stepswith v groove cutting lines minimum three numbers on thread/landing prtion jambs, pillars,and like in screed bedbedding layer,15 mm thick in cement mortar 1:4complete all as required site including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade 44 S & F 50 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed towalls complete all as specified and directed. 45 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed towalls complete all as specified and directed. 46 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed tofloorscomplete all as specified and directed. 47 S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to Floorcomplete all as specified and directed. 48 M & L for PVC (SWR) plain Floor/ Nahani trap of 75/110 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed. 49 S & F 110 mm bore PVC (SWR) junction single (Single `T) equal or unequal with access door complete all as specified and directed. 50 S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. 51 S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. 52 Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 53 Supplying and laying of 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 54 S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres complete all as specified and directed. 55 S&FBall valves 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. 56 S&F bib taps 15mm bore (for iron pipe) cast copper alloy fancy type chromium plated butter fly handle screwed down complete all as specified. 57 S & F Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cementmortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm and bowl size410 mm x 330 mm x 160 mm complete all as specified and directed. 58 S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and complete all as specified and directed. 59 S&F Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/Plastic cleats(minimumweight 170gms) 60 S&F in repairs PVC flexible waste pipe 32/40 mm dia with socket, 100 cm long for WHB/Sink. 61 Supply only 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 62 S & FSecond class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 63 S & F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panelswith decorative face veneers on both faces with lipping to matchcomplete all as specified and directed. 64 S & F Mild steel sections in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290 Gde E-165 65 Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates,Kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work 66 S & F300 mm long Brass, sliding door bolt with sand or die - cast brass hasp, staple (bolt type)and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. 67 S & F 200mm long Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts complete all as specified and directed. 68 S & F 125 mm medium weight Brass butt hinges with brass/bronze hinge pincomplete all as specified and directed. 69 S & F 150 mm long Extruded Brass handles, fabricated type, complete all as specified and directed. 70 S/F brass cup board lock 75mm size 4 level with duplicate keys. 71 M & Lfor 18 mm thick prelaminated particle board, interior grade, prelaminated two side with decorative choice lamination both sides for kitchen cuboards complete as directed by Engr-in-charge 72 M/L for Ist class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in I st class H.W.sectional area n. exc. 6 Sqcm 73 S/F brass handles extruded fabricated type100mm size complete all as specified and directed 74 S&F magnetic catch for cuboard complete all as specified and directed 75 S & F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm diawith suitable SS brackets matching to curtain rod of make as as approved by GE upto 4th storey complete all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ] 76 S&Fcontinuous (piano) hinges brasswidth of flaps (when open) 40mm complete all as specified and directed. 77 S&F 150 mm Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring Fixed in floor 78 Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed. 79 Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed 80 Treating the Soil along with external perimeter of building at the rate of 2.25litres of emulsion permetre ofthe perimeter wallcomplete all as specified and directed 81 Providing and injecting chemical emulsion for post construction Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litres per hole by drilling 6 mm dia., holes at a down ward angleof 45 degree at 150 mm centre to centre and sealing the same to match with the existing finish complete all as specified and directed 82 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge 83 S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge 84 S &f powder Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge 85 S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane 86 S & F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squaresexceeding 0.5 Sqm in each pane 87 S&F Steel cup board shutters Godrej pattern double shutters including frame made of 1 mm thick MS sheet incl stiffners, moulding, bending, welding, necessary fittings and locking arrangement as similar to steel cup board and two coats of spray painting over metal putty incl preparation and primer incl fixing to the existing concrete wall. (Approximate size of the cup board 90 cm x 190 cm measurement to be made in Sqm incl frame) and all as specified. 88 S&F Steel cup board shelves Godrej patternmade of 1 mm thick MS sheet incl stiffners, moulding, bending, welding, necessary fittingsand two coats of spray painting over metal putty incl preparation and primer incl fixing to the existing concrete wall. 89 M&L Chequred Cement concrete tiles 300 cm x 300 cm x20mm thick, machine pressed with grey cement and pigment; set, jointed and poin ted in net cement shurry in floors, and cut and polished over 15mm thick screed bed in CM 1:6including demolition of old tiles complete all as specified 90 M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes including forming cradles of pipes after they are laid and tested for 200 mm bore pipes after they are laid and tested complete all as specified and directed. 91 M & L for Reinforced concrete pipes 200mm bore of class NP2, laid and jointed with collars including demolition and breaking up existing drain pipes set in cement mortar complete all as specified and directed. 92 SCHEDULE A PART-II: E/M WORKS 93 M & L For Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn throughPVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light Point / Fan Point /bell pointcontrolled by One Switchwith all accessories complete all as specified. [Note- The PVC Conduit to Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and pointing in cement mortar and making good for same unit rates are inculded for same] 94 Description all as per item No. 91 above but for 05Amp switch socket out let, same board complete all as specified 95 Description all as per item No. 91 above but for 05Amp switch socket out let, independent with 1.5sqmm copper cable of PVC insulated, unsheathed, multi stranded and 1.5 Sqmm for earth continuity conductor, complete all as specified 96 Description all as per item No. 91 above but for 15/16Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified 97 S& F switch modularone way 6 Amps,1 module 230V complete all as specified and directed. 98 S& F modular switch 1way 16 Amps, 1 module 230V of 1 module complete all as specified and directed. 99 S& F modularsocket outlet 3 pin, 6 Amp 2module 230V complete all as specified and directed. 100 S& F modularsocket outlet 3 pin, 6/16 Amp 2module 230V complete all as specified and directed. 101 S& F ceiling rose surface bake lite complete all as specified and directed by Engr-in-charge. 102 S& F modular type fan regulator step down type 120W complete all as specified and directed. 103 S & F Surface & wall mounted Energy efficient LED Tube Light batten Fitting, of not less than 18 W output, 5700 K of cool /warm white, with extruded aluminium housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. 104 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr in charge. 105 Supply and fix Exhaust fan AC single phase 230/240V of size 300mm sweep with blades, frames, louvers and wire mesh, including making hole of proper size for fixing of exhaust fan and making good to disturbed surfaces and matching with existing wall complete all as specified and as directed by Engr-In Charge. 106 Supply and fixingof Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt,8 Way, IP-42 protection and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. 107 Supply and fixing of MCB 40 to 63A, 240 Volt, SPN, breaking capacity 10 KA C series, , complete all as specified 108 Supply and fixing s of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA C series,complete all as specified 109 S & F s Modular Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20A rating complete all as specified and as directed. 110 S & F Rigid non-metallic PVC conduit of 25mm dia inclusive of junction boxes (junction/ terminal) and provision of TV Cable from TV socket to outside of main entrance or as directed including all accesories such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. 111 Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessoriesconcealed/semi concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old unserviceable sub main wiring complete all as specified. [Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduitshall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.] 112 Supply, laying & testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core Complete all as specified and directed. 113 Earthing complete with Galvanised Steel Earth Plate Electrode 600 x 600 x 6 mm thick burried directly in ground (Earth Pit not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mmas earth lead and GI pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate bymeans of GI Bolts & Nuts complete all as per Electrical Plate No 3 of SSR Part - I, connected to panel/DB including testing on completion including main earthing, Charcoal, Common Salt, PCC (1:2:4, Type B1) Pit with RCC 1:2:4, Type B1 Cover, 50mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS Funnels with 20 mm bore, medium grade GI watering Pipe, Wire Mesh, Earth Work excavation, return filling, removal of surplus soil etc., and disconnecting and taking down existing Earthing of any description complete all as specified and directed.
