Tender For Remaining Work Of Major Repair Work At Existing Hostel Kgbv Khetarali - 1 Part A ( Building Work) Based On Bsr Pwd 2013 Circle Palidismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal O, pali-Rajasthan

Tender For Remaining Work Of Major Repair Work At Existing Hostel Kgbv Khetarali - 1 Part A ( Building Work) Based on BSR PWD 2013 Circle paliDismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 2 Desmantling of floring with car including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead for Cement concrete flooring. 3 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 4 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 5 Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size 6 Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). 7 Brick masonary in foundation and plinth with bricks of class designation 75 mm in : Cement lime mortar 1:1:6 (1-Cement:1-lime putty:6-coarse sand) Add extra over item No. 5.1 for brick work in superstructure up to third storey. 8 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. 20 mm thick. 9 Random rubble dry stone Kharanja under floor. 10 Brick work in partition in super structure up to third storey 7 Cm. thick (brick on edges) using bricks of class designation 75 with nominal hoop rainforcement (2 Nos 6mm MS bar) at every fourth course in Cement mortar 1:4 (1-Cement:4-coarse sand). 11 Providing & laying interlocking terrzo cloured block plastic moulded.80 mm thickness having min. crushing strangth 40 N/mm2 laid over 40 mm thick river sand bed complete as per drawing and approved by Engineer In Charge , Complete with all respect . 12 Supplying and fixing machinre cut and polished stone shelves. tandds and sills in CM 1:3 with machine cut edges :kota stone 25 to 30 mm thick. 13 Supplying and fixing rough dressed stone sills.dassa coping, cornices sriwan, string courses etc. in cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade:75 mm thick. 14 Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 40 mm thick with 20 mm thick nominal size aggregate.Add extra if finished with a floating coat of neat cement including cement slurry, making of lines or grooves etc. complete. 15 Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). 16 Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Category-II : Ordinary Quality 17 Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 18 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: 19 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. 20 kota stone slab flooring 25 mm thick over 20mm average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 Course sand for area 2001 to 5000 sq.Cm 21 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. 22 Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. 23 P & F WVC Foot-rest (IS:2556 Mark) including cutting and making good the floor size 250x125x25 mm. 24 P & F WVC (10 litres) low-level flushing cistern with cover. 25 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 450 mm x 300 mm. 26 P & F G.I. pipes (internal work) with G.I. Fitting excluding union (IS:1239 Mark) including trenching & refilling earth etc.15mm dia B Class 27 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15 mm Brass (IS:8931 marked). 28 P&F toilet paper holder with rod of approved quality/ make.C.P. brass heavy & superior quality 29 P&F Grating of approved quality/ make do- Heavy quality of approved make 125mm 30 P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. 400 gm, 15 mm.

INR 1000 /-

INR 10640.0 /-

INR 5.32 Lakhs /-