Tender For Construction Of Range Office Cum Residence At Khairthal - 1.6 Earth work in excavation by mechanical means (Hydraulic excavator manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: All kinds of soil 2 31.6 Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level 1:4 :8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) 3 6.1.6 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 (1-Cement: 6-Sand) 4 3.7.2 Providing and laving damp proof course with cement concrete grade M-1501 2:4) mortar prepared with 1% solution of water-proot compound complete as per specification 75mm thick 5 5.2.2 Brick work with F.P.S. bricks of class designation 75 in superstructure above pinth level upto floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) 6 583 Half brick masonry in Superstructure, above plinth level upto floor level using bricks of designation 75 Kitchan 7 4.30.2 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhalias, Intel, beam, plinth beam etc. 8 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including cunne ction, finishing with rendering in cement sand mortar 1:3 (3 sparse sand) and making good the joints and cost of plasters of required) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached plasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Man grade Nominal Mix/Design Mix 9 4.13.3 STEEL REINFORCEMENT: 4.13 Providing and fabricating reinforcement for R.CC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five leve (Onginal producers who manufacture billet directly from ro ores and roll the bilets to produce steel conforming to 16:1796) Thermo-mechanically Treated bars (Conforming of relevent Scode (100 kg per cum of cc.) 10 12.2.2 Plaster on new surface on walls in cement sand mortar 14 including racking of joints etc. complete fine finish:20mm thick Deduction 11 12.2.2 Plaster on new surface on walls in cement sand mortar 14 including racking of joints etc. complete fine finish:20mm thick parapet inner 12 12.56 mm thick cement plaster to ceiling of mix 1:3 (1cement: 3-fine sand) 13 12.45.1 PAINTING Applying priming coat: With ready mlx pink or gray primer of approved brand and manufacture on wood work hard and soft wood. 14 12.45.3 PAINTING Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works 15 12.46.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work 16 6.18.1 Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4: Upto 15 cm thick Windwa/D 17 6.16.2 Providing dab stone over Chaljas duly fixed in cement sand mortar 1:6 complete: 50mm thick 18 6.15 Providing and fixing horizontal chajja of Red/White sand stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement: 4 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade. 19 1.25 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 20 11.26 Random rubble dry stone Kharanja under floor. 21 3.1.3 Providing and laying in position cement concrete Including curing, compaction etc. complete in specified grade excluding the cost of entering and shuttering-All work up to plinth level M15 grade Nominal Mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size). (Flooring) 22 11.18.1 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm: Sqm 864.00 23 7.22.1 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tileconfirming to IS: 13755 and IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors,steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 250mm x 375mm Sqm 661.00 24 7.23.1 P&F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1:4 Including grounting the Joints with white cement and matching pigment etc complete. Size 298mm x 298mm Sqm 641.00 25 10.17.1 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) 26 3.8 Providing & fixing precast cement concrete coping 1:2:4 mix 50mm thick complete as per specification: 27 8.13.2.2 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A: 30 mm thick Decorative teak veneer One side 28 9.28.1 Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in CC block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with lazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in-charge Window openable. 29 15.25.1 Providing and fixing in CM 1:4 double paltam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm. 30 7.5.1 Providing and fixing Granite stone slab mirror polished and machine edge cut in walis, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white cement: 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu/Jalore (Red/Choclate/Black/Pink Colour) Up to 1500 Cm2 Tiles Sqm. 1812.00 31 6.17.1 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges: Sand or other approved stone 25mm thick. 32 7.8.2.1 Granite/Kota Stone Work Full Edge moulding 33 Sanitory Work 34 Electricity Fitting 35 Under Ground 15000 Litre Capicity Water Tank
