Misc. urgent Civil Maintenance work in Staff Quarter due to change of occupancy or Urgent maintenance work on requirement basis under whole city of Agra area.; 1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. 5 In cement mortar 6 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 7 Of area 3 sq. metres and below 8 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 9 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 11 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 12 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 14 Cement mortar 1:6 (1 cement : 6 coarse sand) 15 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 16 Deduct for not providing hinges in doors, windows or clerestory window shutters with : 17 Stainless steel butt hinges with stainless steel screws : 18 For 2nd class teak wood and other class of wood shutters. 19 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 20 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 21 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 22 20 mm dia (heavy type) 23 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 24 250x16 mm 25 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 26 200x10 mm 27 150x10 mm 28 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 29 125 mm 30 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 31 Twin rubber stopper 32 Providing and fixing of fly proof Stainless steel(SS) wire gauge to existing wooden/steel door/ windows /iron Jalli using S.S. wire gauge with average aperture 1.50 mm in both direction with wire of dia 0.50 mm including wooden fillets, nails, screws or nuts and bolts etc. dismantaling of existing wire mesh and shutter if required etc., all complete as per direction of engineer in charge. 33 Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 34 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 35 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 36 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. 37 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, 38 (i)Single socketed pipes. 39 75 mm diameter 40 110 mm diameter 41 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 42 Single tee with door 43 75x75x75 mm 44 110x110x110 mm 45 Bend 87.5° 46 75 mm bend 47 110 mm bend 48 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 49 75 mm 50 110 mm 51 12 mm cement plaster of mix : 52 1:6 (1 cement: 6 coarse sand) 53 15 mm cement plaster on rough side of single or half brick wall of mix : 54 1:6 (1 cement: 6 coarse sand) 55 White washing with lime to give an even shade: 56 New work (three or more coats) 57 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. 58 Two or more coats on new work. 59 Finishing walls with water proofing cement paint of required shade : 60 New work (Two or more coats applied @ 3.84 kg/10 sqm). 61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 62 Two or more coats on new work. 63 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 64 One coat. 65 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 66 One coat. 67 White washing with lime to give an even shade : 68 Old work (one or more coats) . 69 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 70 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 71 One or more coats on old work. 72 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. 73 With cement mortar 1:4 (1cement: 4 coarse sand). 74 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 75 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 76 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. 78 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 79 Orissa pattern W.C Pan of size 580x440 mm 80 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 81 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 82 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 83 Kitchen sink without drain board 84 610x460 mm bowl depth 200 mm. 85 Providing and fixing white vitreous china water closet squatting pan (Indian type) : 86 Orissa pattern W.C. pan of size 580x440 mm 87 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 88 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 89 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 90 10 litre capacity - White 91 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 92 White solid plastic seat with lid 93 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 94 Flat back wash basin of size 550x400 mm. 95 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 96 Flexible pipe 97 32 mm dia 98 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 99 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 100 Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 101 Credit of old un- serviceable materials recovered from dismantling / demolishing from work: 102 Old rusted ( unserviceable ) C.I/S.C.I pipes and fitting , Mild Steel / Steel Section, G.I/M.S pipes etc. 103 Brass Items like CP brass bib cock, Stop cock, Pillar cock, Angle cock etc including internal existing fittings phase, washer etc. 104 Low level PVC flush tanks (10 litres) 105 Old damaged, broken,unserviceable PVC tank capacity upto 500 litre 106 Old damaged, broken,unserviceable PVC tank capacity 1000 litre. 107 Old unserviceable wooden door shutters of area 3 Sqm or below, recovered from dismantling of partition/door shutters. 108 Repairing of old CI/PVC flushing cistern including replacing syphan and ball valve etc. all complete as per direction of Engineer-in-charge. 109 Providing and fixing of M.S. / C.I /Angle bracket to wash basin/sink i/c removal of old damaged bracket and refilling, finishing of hole etc. ,all complete as per direction of E-I-C. 110 Cleaning and de-silting of chocked WC Seat, trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all complete as per the direction of Engineer-in-charge. 111 Cleaning of open surface drain lines by removing the deposited and other rubbish from the drain and cleaning the lines by sweeping, rodding and flushing with water upto free flow of drainage system including disposal of deposits out side of compound ,near municipal dumping ground all complete as directed by the Engineer -in- charge. 112 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 113 20 mm nominal outer dia. Pipes. 114 25 mm nominal outer dia .Pipes. 115 32 mm nominal outer dia. Pipes. 116 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 117 25 mm nominal outer dia. Pipes. 118 32 mm nominal outer dia. Pipes. 119 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 120 15 mm dia. nominal bore 121 20 mm dia. nominal bore 122 25 mm dia. nominal bore 123 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 124 25 mm nominal bore 125 20 mm nominal bore 126 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 127 15 mm nominal bore 128 20 mm nominal bore 129 25 mm nominal bore 130 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 131 Providing and fixing covers for PVC water storage tanks with necessary MS / PVC clamps 132 For 500 litres capacity tanks 133 Providing and fixing PTMT bib cock of approved quality and colour. 134 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 135 Providing and fixing PTMT stop cock of approved quality and colour. 136 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 137 Providing and fixing PTMT pillar cock of approved quality and colour . 138 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. 139 Providing and fixing Stainless Steel grating 0.60mm thick grating for floor traps complete as directed. 140 100mm dia Circular 141 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 142 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 143 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. 144 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 145 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. 146 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 147 15 mm nominal bore with 45 cm length. 148 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 149 20mm nominal bore. Weighing not less than 40 gms. 150 25mm nominal bore. Weighing not less than 62 gms. 151 Cutting holes up to 30x30 cm in walls including making good the same: 152 With common burnt clay F.P.S. (non modular) bricks. 153 Providing and fixing of Stainless Steel towel rail of dia 25 mm with required rawl plug, screws etc. ,all complete as per direction of E-I-C. (a) 600 mm long 154 Providing and fixing CPVC gate valve/ ball valve (Plastic) of supreme or equivalent make all complete as per direction of Engineer-in-Charge. 155 20 mm dia . 156 25 mm Dia . 157 Providing and fixing CPVC Union of Supreme or equivalent make in CPVC pipe including jointing with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. 158 20 mm dia 159 25 mm Dia 160 32 mm Dia 161 Cleaning of chocked G.I./CPVC water supply line by manual or mechanical means including removal of rubbish,sand,earth etc and disposal of same all complete as per direction of Engineer in charge. (A) Dia of pipe 15 mm to 32 mm . 162 Arranging welding machine for welding of Broken steel componants such as Handels, fastners, hinges, grills, etc.as and where required as per the direction of Engineer-in-Charge. (rate includes labour & transportation of machine at site). 163 Supply of Carpenter for miscelleaneous work at site of work wherever required. 164 Supply of beldar for miscelleaneous work on urgent need in the compound. 165 Supply of Sewer Men for miscelleaneous cleaning work wherever required at site of work
