Tender For Provn Of Certain Sanctioned Works In The Area Of Age B/R-Ii Pms And Age E/M (We) Pooh Under Ge 863 Ews; 1 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 24cm deep and getting outIN HARD/DENSE soil complete all as specified & directed by Engineer-in-charge. 2 Excavation in post holes each n.exc 0.50 Cum and getting out, returning,filling in and ramming earth or broken rubble mixed with earth around in hard/dense soil for foundation of vertical posts complete all as specified & directed by Engineer-in-charge. 3 M&L 1:3:6 type C-1 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge. 4 M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-charge. 5 M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation of post holes, filling and mass concretecomplete all as specified & directed by Engineer-in-charge. 6 S/F Fe-410 W(GdeE-250) quality B steel work(tubular pipes,square/round ) as in vertical posts,rafter framed using ERW or induction butt welded including tubular pipes(medium) for supporting tubular/square pipe rafters/purlins special shaped washer etc.complete all as specified & directed by Engineer-in-charge. 7 S & F Fe-410W(GdeE-250) quality BRooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified. 8 M&L Fe-410W(GdeE-250) quality B plates, plain, forming holes with riveted bolted or welded attachement complete all as specified & directed by Engineer-in-charge. 9 M & L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified & directed by Engineer-in-charge. 10 M & L forHardcore (Broken stone/boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surfacecomplete all as specified & directed by Engineer-in-charge. 11 M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using min 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified & directed by Engineer-in-charge.(Note: No price adjustment for cement used over 400 Kg/Cum ) 12 Forming 12mm thick Expansion joints Grade A filledwith pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’for 100mm complete all as specified & directed by Engineer-in-charge. 13 Forming Contraction (Dummy) joints Grade A 65mm deep x 10mm wide, filled with sealing compound complete all as specified & directed by Engineer-in-charge. 14 Applying two coats of white wash on new plastered surfaces including preparation of surfaces complete all as specified & directed by Engineer-in-charge. 15 Removing excavated material n.exc 50Mtr and depositing where directed at a level n.exc 1.50Mtr above the starting point complete all as specified & directed by Engineer-in-charge. 16 M & L for Mild steel 16 to 20mm screw holding down bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified & directed by Engineer-in-charge.. 17 S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge. 18 Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified & directed by Engineer-in-charge. 19 M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub base flooring complete all as specified & directed by Engineer-in-charge. 20 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engineer-in-charge. 21 M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified & directed by Engineer-in-charge. 22 M & L for Glazed coloured ceramic tiles in vertical surface450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick rendering in CM 1:4 complete all as specified & directed by Engineer-in-charge. 23 M&L 75 mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection and finished even and smooth without using extra cement incl forming and filling the joints with bitumastic filling n exc 2.0 m in length complete all as specified & directed by Engineer-in-charge. 24 Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed by Engineer-in-charge. 25 Taking down chowkats or frames(without taking off shutters from the frame) area notexc 1.5 Sqm each complete all as specified & directed by Engineer-in-charge. 26 S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified & directed by Engineer-in-charge. 27 S&F Anodised aluminium frame ofdoors, windows & ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed by Engineer-in-charge. 28 S&F Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors, hinges, anodiesed aluminium snap beading screw etccomplete all as specified & directed by Engineer-in-charge. 29 S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.)complete all as specified & directed by Engineer-in-charge. 30 S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC C channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified & directed by Engineer-in-charge. 31 S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge. 32 S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge. 33 S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed by Engineer-in-charge. 34 S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified & directed by Engineer-in-charge. 35 S & F butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified & directed by Engineer-in-charge. 36 S&F 4 mm thick Aluminium composite Panel for door including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etccomplete all as specified & directed by Engineer-in-charge. 37 Hacking out old broken glass (any thickness) , size, quality or description ) frommetal frame including punching or drilling out old glazing pins complete all as specified & directed by Engineer-in-charge. 38 S&F 4mm thick sheet glass, ordinary quality and glazing with oil puttyin squares n,exc 0.5 Sqm,each pane complete all as specified & directed by Engineer-in-charge. 39 Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified & directed by Engineer-in-charge. 40 S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in-charge. 41 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in-charge. 42 Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed by Engineer-in-charge. 43 S&F Mild steel work as in rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) 44 S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as specified & directed by Engineer-in-charge. 45 S&F 2000 Ltrs capacity, rotational moulded polyethylene water storage tanks triple layer(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all as specified & directed by Engineer-in-charge. 46 Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairscomplete all as specified & directed by Engineer-in-charge. 47 S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairscomplete all as specified & directed by Engineer-in-charge. 48 Fixing only 15 mm water tubes,using pipe retrieved from taking dwon of GI tubing to walls and ceilings or laying in floorscomplete all as specified & directed by Engineer-in-charge. 49 Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairscomplete all as specified & directed by Engineer-in-charge. 50 S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairscomplete all as specified & directed by Engineer-in-charge. 51 Fixing only 20 mm water tubes, using pipe retrieved from taking down of GI tubing to walls and ceilings or laying in floors complete all as specified & directed by Engineer-in-charge. 52 S&F in repairs bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tubecomplete all as specified & directed by Engineer-in-charge. 53 S&F in repairs 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles complete all as specified & directed by Engineer-in-charge. 54 S&F PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia complete all as specified & directed by Engineer-in-charge. 55 S&F in repairs Vitreous china squatting pan Orissa pattern size 580X 440 mm white with integral foot rest (exluding flushing cistern and flush pipe) including connection to trap,concrete and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floorcomplete all as specified & directed by Engineer-in-charge. 56 S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white,including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connectioncomplete all as specified & directed by Engineer-in-charge. 57 S&F Chromium plated jet for EWC complete all as specified & directed by Engineer-in-charge. 58 S&F in repairs Vitreous china wash basin, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified & directed by Engineer-in-charge. 59 Supply only 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed by Engineer-in-charge. 60 S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm complete all as specified & directed by Engineer-in-charge. 61 S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm in repairscomplete all as specified & directed by Engineer-in-charge. 62 S&F in repairs Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube complete all as specified & directed by Engineer-in-charge. 63 S&F in repairs CP tubular towel rail, 20 mm dia. 60 cm long between flanges complete all as specified & directed by Engineer-in-charge. 64 S&F in repairs Soap dish, cast copper alloy, chromium plated with screws complete all as specified & directed by Engineer-in-charge. 65 S&F in repairs 600 mm X 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified & directed by Engineer-in-charge. 66 S&F110 mm bore, PVC (SWR) pipes single socketed/ elbow/ tee, in anylength with rubber ring joints, laid in trenches or in floorsafter dismantling old one complete all as specified & directed by Engineer-in-charge. 67 S&F in repairs 75 mm bore, PVC (SWR) pipes single socketed, in anylength with rubber ring joints, laid in trenches or in floorsafter dismantling old onecomplete all as specified & directed by Engineer-in-charge. 68 S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge. 69 Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-charge. 70 M&L 15mm thick rendering on brick work or concrete surfacesin cement mortar 1:4finished even and smooth without using extra cement (with water proofing compound) complete all as specified & directed by Engineer-in-charge. 71 M&L two coats cement base painton plastered surface including preparation of newly plastered surfaces complete all as specified & directed by Engineer-in-charge. 72 M&L one coats of syntheticenamal paint to steel surfaces of any discriptionnot otherwise described over 10cm width or girth preparation of old surfaces complete all as specified & directed by Engineer-in-charge. 73 M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in-charge. 74 Dismantling wall and ceiling boards of any description or any thickness including cover fillets complete all as specified & directed by Engineer-in-charge. 75 S&F powder coated GI snap grid of size 605 X 605mm frame work for false ceiling includinghangers 2mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long whereever required or tie on structural steel complete all as specified and directed. 76 S&F Exposed metal frame ceiling with 8mm thick decorativelaminated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified & directed by Engineer-in-charge. 77 S& Ffor 110mm PVC (SWR)bends complete all as specified & directed by Engineer-in-charge. 78 S& Ffor 110mm PVC (SWR)junction single, (Single T) equal or unequalcomplete all as specified & directed by Engineer-in-charge. 79 S& F 110mm PVC (SWR) vent cowlcomplete all as specified & directed by Engineer-in-charge. 80 S& F 75mm /110mm PVC (SWR) reducer complete all as specified & directed by Engineer-in-charge. 81 M&L for preparation of old surfaces & applying onecoats of white wash on wall complete all as specified & directed by Engineer-in-charge. 82 M&L chequered cement concrete tiles 20cmx 20cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge. 83 M&L for 75 mm thick P.C.C 1:4:8type B-2 using 40mm graded stone agg as in sub base of floor complete all as specified & directed by Engineer-in-charge. 84 M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-charge. 85 Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified & directed by Engineer-in-charge. 86 M&L 1:3:6 type C-1 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge. 87 M&L 15mm thick rendering on brick work or concrete surfacesin cement mortar 1:4finished even and smooth without using extra cement (with water proofing compound) complete all as specified & directed by Engineer-in-charge. 88 M&L three coats of white wash on plastered surface including preparation of newly plastered surfaces complete all as specified & directed by Engineer-in-charge. 89 M&L cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore after they are laid and tested complete all as specified & directed by Engineer-in-charge. 90 Demolition and breaking up drain pipes (salt, glazed ware, AC or reinforced concrete) (200mm internal dia) of any description set in cement mortar complete all as specified & directed by Engineer-in-charge. 91 M&L 150mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete with collars and jointed complete all as specified & directed by Engineer-in-charge. 92 Demolition of RCC work of any description and any position complete all as specified & directed by Engineer-in-charge. 93 M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like except set in cement mortor 1:4 complete incl necessary form work all complete all as specified & directed by Engineer-in-charge. 94 M&L mild steel TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire (annealed) not l3ess than 0.9 mm dia all complete all as specified & directed by Engineer-in-charge. 95 Pumping out/dewatering of soakage wells septic tanks etc of any size and depth by machanical means i.e. pumping sets etc and removing the muddy water in liquid or semi-liquid state to a pit of sufficient size and depth at a place exc. 250mtrs away from defence land and burried in ground including necesary excavation earth work and spreading of bleaching powder complete all as specified & directed by Engineer-in-charge. 96 Desilting/desludging theseptic tanks/ soakage wells/manholes of any size and any depth etc by manual labour or mechanical means and removing the sludge in liquid or semi-liquid state out side defence land complete all as specified & directed by Engineer-in-charge. 97 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, excluding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified & directed by Engineer-in-charge. 98 M&L forpoint wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulatedstranded copper conductor cable for continous earthing in & incl casing capping point wiring with accessories having ISI mark for one light/fan/bell point/5 amp indep/power point/s controlled by one switch complete all as specified & directed by Engineer-in-charge. 99 All as per item No 98 here-in-before but for one multipin socket outlet 5 Amp but using 2x 1.5 + 1 x 1.5sqmm multistranded FRLS copper cable onthe independent board complete all as specified & directed by Engineer-in-charge. 100 All as per item No 98 here-in-before but for one multipin socket outlet 5 Amp on the same board with other switches complete all as specified & directed by Engineer-in-charge. 101 All as per item No 98 here-in-before but for one multipin socket outlet 15 Amp,but using 2 x2.5 +1 x 2.5sqmm multistranded FRLS copper cable, independent board complete all as specified & directed by Engineer-in-charge. 102 S&F in replacement of switch piano type 5 Amp, 230 Volt, flush type single pole one waycomplete all as specified & directed by Engineer-in-charge. 103 S&F in replacement of socket outlet multipin 5 Amp 230 Volt flush typecomplete all as specified & directed by Engineer-in-charge. 104 S&F in replacement of switch piano type 15 Amp, 230 Volt, flush type single pole one waycomplete all as specified & directed by Engineer-in-charge. 105 S&F in replacement of socket outlet multi pin 15 Amp 230 Volt flush type complete all as specified & directed by Engineer-in-charge. 106 S&F In replacement offorLamp holder, PVC/Polycarbonate type with back plate suitable for Angle/batten fittings complete all as specified & directed by Engineer-in-charge. 107 S&F of rechargeable led bulb minimum 4 Hrs Battery backup 9 Watt B-22 Base complete all as specified & directed by Engineer-in-charge. 108 S&F in rplacement of Ceiling rose, 3 terminal, PVC isolated body complete all as specified & directed by Engineer-in-charge. 109 S&F in replacement of LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed by Engineer-in-charge. 110 S&F in replacement LED light fitting 1x10W/1X12W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer-in-charge. 111 Supply and fix Sheet metal enclosure for DBs 8 way, double door,240 Volt, with 200 Amps rates bus bar 112 S&F in replacement of MCB 6 to 32 amp rating 240V, 10KA B curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-charge. 113 S&F in replacement of MCB SPN 40amp rating 240V, 10KA B curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-charge. 114 Supply & laying LT UG XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade cross-sectional area 10 sqmm 2 core as per IS specification laid through GI pipe/on floor/wall complete all as specified & directed by Engineer-in-charge. 115 Supply and laying of GI pipe light galvanized with all fitting laid in trenches for cable proctection of 50 mm bore complete all as specified & directed by Engineer-in-charge. 116 M&L in replacement of Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified & directed by Engineer-in-charge. 117 M&L for sand filling floors or in foundation including watering and compansation complete all as specified & directed by Engineer-in-charge. 118 M&L for old size bricks common burnt clay building bricks sub class B designation 75 complete all as specified & directed by Engineer-in-charge. 119 S&F metal type exhaust fan single phase 230/240V of 300 mm sweep including louvre & cutting of holes in a round shape and including fixing the exhaust fan complete all as specified & directed by Engineer-in-charge. 120 S&F single pole and neutral enclosure with a two pin plug and socket complete with one single pole MCB 20 Amp complete all as specified & directed by Engineer-in-charge. 121 S&F highly BEE star rated energy efficient water heater storage type, electric supplied and installed complete incl all,NRV,PVCconnections pipe capacity 25 Litres complete all as specified & directed by Engineer-in-charge. 122 Supply, Installation, Testing and Commissioning ofCentral Heating appliance High power force heater of high grade material used with high level of efficiency sturdy construction type continuous spark igniton & easy to move with heavy duty wheels including following Technial specification all as specified and directed by Engr-in-Charge:- (a) Heat Output (Power) - 44 KW ,37900 Kcal & 140500 to 150000 Btu / Hr (b) Combustible - Kerosene / Diesel (c) Power Supply -220 - 240 (d) Frequency Hz - 50-60 Hz (e) Electric power (w) - 280-360 W (f) IP Protection - 41 IP 123 Material and Labour for Comprehensive Warranty / AMC of the central heating appliance high power of heat output 44 KW as mentioned below from the date of completion of the work:- (a) One year replacement warranty from the date of completion of the work (all machine parts, cleaning included). (b) After warranty, comprehensive AMC for a period of 2 years of the complete system. All as specified and directed by Engr-in-charge. 124 Supply, Installation, Testing and Commissioning Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA copper complete all as specified and directed by Engr-in-Charge 125 Material and Labour in PVC casing caping / conduit sub main wiring for circuit / submain wiring alongwith earth wire with the size 2 x 4.0 sq. mm (Phase & Neutral ) + 1 x 4.0 sq. mm (earth) wireof FRLSPVC insulated multistranded copper conductor, single core cable in surface/ recessed as required( existing serviceableDB To metal clad Box) complete all as specified and directed by Engr-in-Charge Note:- 3 run of 4 sqmm pvc copper wire multistranded & 1 run PVC casing caping shall be measured as one length. 126 Supply and fixing single pole and neutral metal enclosure with a two pin and earth plug and socket complete with one Single Pole and neutral MCB20Amp - 32 Amp 240 V complete all as specified and directed by Engr-in-Charge 127 Supply, installation testing and commisioning of silent diesel engine generating set 415 Volts 3 phase 4 wire, engine as per IS: 10001/10002 and alternator as per IS 13364 complete with relay panel and switch gears for automatic starting on main failure , control panel having mater and sound proof canopy with AMF control panel as per CPCB4 norms and foundation etc of cpacity 30 KVA . A DIESEL ENGINE:Liquid cooled, electric start, four stoke, three cylinders, totally enclosed diesel engine , developing 1500 RPM at NTP. The engine is suitable for genetrating set application and fitted with the following standard accessories:-(i) Flywheel to suit coupling.(ii) Suitable couling. (iii) Water cooling arrangement. (iv) Radiator. (v) Lube oil Filter. (vi) Lube oil pump. (vii) Fuel pump. (viii) Hoses to fuel tank. (ix) Air cleaner assembly. (x) Residential Heavy duty silencer. (xi) Fitted with requisite temperature and pressure gauges. B ALTERNATOR:30 KVA TP CG/LS alternator at 1500 RPM , 0.8 legging power factor, providing three Phase 415 Volts suitable for 50 Hz, H class insulated winding, close- direct coupled, self excited and self regulated type, screen protected, mounted on rigid MS sheet channel base frame . The alternator shall confirm to IS : 13364,IS 4722, BS5000, IEC: 34 and suitable for tropical condition. C CONTROL PANEL:Fitted inside canopy, fabricated out of 1.6 mm CRCA sheet, cubical type tottaly enclosed, powder coated, control panel incorporating the following : 1. 1 No Sedamac unit comprising :- Lube oil pressure metering & safety - high water temperature metering and safety-Fuel level gauge in % metering& safety - Voltage metering & safety - Ampere metering & safety - Frequency meter metering & safety -Engine RPM metering & safety and many more metering & safety - Power metering & safety - Power factor metering.2. 1 set MCB.3. 1 set of suitable current transformer.4. 1 No toggle switch & indicating lamps.5. Input and output terminals for incoming & outgoing. D.AMF PANEL:AMF Panel suitable for 30 KVA DG Set fixing of outside of conopy for DG set with fixing on suitable size of angle frame and PCC including all s directed by Engr-in-Charge. E.ACCESSORIES :01. BASE FRAME: Suitable base frame of sturdy design with necessary reinforcement and with in- built diesel tank. 02. Fuel Tank :- Daily service fuel tank of sheet metal , suitable enough for minimum 8 hours running of DG set complete with drain valve air vent, inlet outlet connections and mechanical gauge .03. BATTERY :- One No battery of 12 volts charged of Amaron or Exide make with its leads. 128 Supplying, laying, LT UG XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade cross sectinal area 25 Sqmm 4 core as per IS specification complete all as specified and directed 129 M & L for GI tubing 80mm (Medium grade) and complete laid in trenches under roadas in mechnical protection of UG cable complete all as specified and directed. 130 Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth in any type of soil for laying underground cables / erection of steel tubular poles / stay pit etc all as specified and directed by Engineer - in - Charge. 131 Returning, filling in incl spreading ,levelling watering and well ramming in layer n exc 25cm in soil each layer complete all as specified and directed by Engineer - in - Charge. 132 Removing excavated surplus material to a distance n exc 50m and depositing where directed at level n. exc 1.5m above the starting point in any type of soil complete all as specified and directed by Engineer - in - Charge. 133 M & L for sand cushioning the UG cable screened unwashed river sand and punning for cushioning to cable complete all as specified and directed by Engineer - in - Charge.rge. 134 Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 125 Ampscomplete all as specified and directed by Engineer - in - Charge. 135 M & L for laying dry bricks old size with sub class B made of burnt clay best quality locally available with permissible tolerance , laid straight in trench for protection of cable complete all as specified and directed by Engineer - in - Charge. 136 M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip of size 32 x 6 mm earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified and including testing on completion. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade for protection of earth wire complete all as specified and directed by Engineer - in - Charge. 137 Schedule of Credit
