|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and directed. |
| 3 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement bars as required complete all as specified and directed. |
| 4 | M&L for light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design) area of each tiles not exceeding 0.36sqm, joint free, as in floors and skirtng, etc. set and jointed in neat cement slurry andjoints grouted with pigment to match with shade laid over and including 15mm thick screed bed in CM (1:6) including dismantling of old tiling fixed in any mortar and position complete all as specified and as directed. |
| 5 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm) in floors and skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including screed bed 15 mm in CM (1:6) including dismantling of old tiling fixed in any mortar and position complete all as specified and directed. |
| 6 | M&L for glazed ceramic colour tiles with suitable matching highlighter in vertical surfaces (design and pattern as approved by GE) of size not less than 450 x 300 x 7-8mm thick set and jointed in neat cement slurry fixed over and including 10mm thick rendering in CM (1:4) as in backing coat and pointed in white or colour cement to match the shade of tiles including dismantling of old tiling fixed in any mortar and position complete all as specified and directed. |
| 7 | M&L for 25mm thick in PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bedding layer for laying in floor as in levelling course complete all as specified and directed. |
| 8 | M&L for green marble (approved pattern and texture) work 15 to 18mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in laid over 20mm cement mortar (1:4)including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and directed. |
| 9 | M&L for cement concrete type D2 (1:4:8) (40mm graded stone aggregate) in foundations and mass concrete etc complete all as specified and directed. |
| 10 | M&L for machine cut kota stone slab in flooring and skirting 20-25mm thick over 20mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and dismantling of old stone slab complete all as specified and directed. |
| 11 | M&L for machine cut kota stone slab 20-25mm thick in step and riser (single piece) with marking of anti-skid thread as required over 10 mm thick cement screed base in 1:4 CM, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and dismantling of old stone slab complete all as specified and directed. |
| 12 | M&L for 50mm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, platform bases etc. n.exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L for heavy duty parking /outdoor tiles 9 to 10 mm thick (square/rectangular) area of each tiles n.exc 0.11 sqm in floors set and jointed in neat cement slurry and fixed over 15mm thick screed bed in CM 1:4 including demolition of old tiles complete all as specified and directed. |
| 14 | M&L for 75mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ path etc finished fair and even laid in bays n.exc 2m in length and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen mastic 1:3 complete all as specified and directed. |
| 15 | M&L for 10 mm thick rendering in cement mortar 1:6 on other than fair face of brick/concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick cement plaster in two layers (10mm in cement mortar 1:6 as backing coat and 5mm thick in cement mortar 1:4 finish coat with WPC) on fair faces of bricks or concrete surface finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. Note:- WPC shall be measured and paid seperately. |
| 17 | Supply only integral water proofing compound complete all as specified and directed. |
| 18 | M&L for 5 mm thick rendering in cement mortar 1:3 as in ceiling on fair faces of brick/concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of 2 mm thick as required as per smooth surfaces wall complete all as specified and directed. |
| 20 | M&L for complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of primer complete all as specified and directed. |
| 22 | M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion complete all as specified and directed. |
| 23 | M&L for preparation of new plastered or unplastered surfaces as in ceilings and applying three coats of white wash complete all as specified and directed. |
| 24 | M&L for prepration of old ceiling surfaces, applying two coat of white wash on ceiling complete all as specified and directed. |
| 25 | M&L for one coat of black bitumnious painting over CI, steel, iron, concrete, brick, stone, etc. exceeding 10cm in width or girth complete all as specified and directed. |
| 26 | M&L for sunken floor treatment as follows:- |
| 27 | M&L for demolition of cement concrete in sunken floors and removing dubrish outside MD land complete all as specified and directed. |
| 28 | M&L for brushing neat cement slurry @ 3.0 Kg of cement per sqm mixed with WPC @ 3% by weight of cement or as per manufacturer instructions to walls and base of sunken portion including filling all holes and cracks including testing for water tightness for 24 Hrs complete all as specified and directed.Note:- Water tightness testing should be done after 24 hours. |
| 29 | M&L for PCC 1:1.5:3, type A-0 (using 12.5 mm graded stone aggregate) using WPC @ 3% by weight of cement or as per manufacturer instructions on bottom of sunken portion maintaining proper slope towards spout complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 30 | M&L for 15 mm thick rendering on vertical sides and top surface of sunken floor in cement mortar 1:3, mixed with WPC @ 3% by weight of cement or as per manufacturer instructions complete all as specified and directed.Notes: (i) Plaster shall be carried out whilst concrete is green. (ii) WPC shall will be measured and paid separately. |
| 31 | M&L for appying two coats of Dr. Fixit krystalline water proofing coating compound of M/s Pidilite or other equivalent make as approved after fixing of sewage/plumbing pipes with fixtures in position in sunken portion complete all as specified and directed. |
| 32 | M&L for filling PCC 1:5:10, type E-2 (using 40 mm graded brick aggregate) in sunken floor complete all as specified and directed. |
| 33 | M&L for spouts of 50 mm dia GI pipe light grade and projecting 450mm clear from outer face of wall with and including providing PVC mosquito proof cap on inner face of pipe in sunken floor complete as specified and directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed. |
| 35 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed. |
| 36 | Taking down shutters of any description area of each exc 1 sqm but n.exc 2 sqm complete all as specified and directed. |
| 37 | Taking down and refixing shutters of any description exc 1 sqm but n.exc 2 sqm complete all as specified and directed. |
| 38 | S&F of 105x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc., made out of 1.25mm thick mild steel sheet complete all as specified and directed. |
| 39 | S&F of 125x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc., made out of 1.25mm thick mild steel sheet complete all as specified and directed. |
| 40 | M&L for cement concrete type B1, 1:2:4 using 20mm graded stone aggregate as in filling of door frame of pressed steel and bed blocks and like etc complete all as specifed and directed. |
| 41 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant complete all as specified and directed. |
| 42 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 43 | S&F of 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 44 | S&F of 35mm thick second class hard wood factory made, glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and directed. Note: - Size of member of shutters should be as specified in SSR Part-I 1991 section 8 clause 8.24 (a). |
| 45 | S&F of second class hard wood small fittings such as brackets of any type, latch and hinges blocks, shaped door and window stops and the like including all necessary labours; article n.exc 200cu.cm each complete all as specified and directed. |
| 46 | S&F of 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 47 | S&F of ISI marked, 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 48 | S&F of 300mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 49 | S&F of 100mm stainless steel butt hinges (heavy) complete all as specified and directed. |
| 50 | S&F of 75mm stainless steel butt hinges (heavy) complete all as specified and directed. |
| 51 | S&F of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 52 | S&F of mild steel of 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete all as specified and directed. |
| 53 | M&L for preparation of newly wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 54 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 55 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 56 | M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 57 | S&F of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to openings complete all as specified and directed. |
| 58 | Dismantling of boarding, any description, fixed in any position with screws etc complete all as specified and directed. |
| 59 | M&L for 12mm thick plywood (Number of ply should not less than 7), grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 60 | M&L for 0.9mm thick decorative laminated, type 1 of surface finish (colour and pattern as approved by GE) fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 61 | S&F of 350mm long, SS telescopic channel fixed in sliding drawer with necessary screws complete all as specified and directed. |
| 62 | S&F of stainless steel pressed handles, oval type, stove enamelled black fixed in kitchen/almirah shutters and drawers complete all as specified and directed. |
| 63 | S&F of second class hard wood plain fillet square, rectangular and triangular in section, wrought secured with sectional area exc 13 but n.exc 25 sqcm complete all as specified and directed. |
| 64 | S&F of brass drawer pulls, 4 screw plate with fixed dished pull, 80 mmlong complete all as specified and directed. |
| 65 | S&F of 75mm size hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 66 | S&F of 30mm thick continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 67 | S&F of magnetic catches for cabinets of size 50 mm complete with striking plate and magnetic stud complete all as specified and directed. |
| 68 | S&F of 4 lever brass, mortice lock, vertical type, size 100mm complete all as specified and directed. |
| 69 | S&F in repairs powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) frame and shutters with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, suitable aluminum handle, handle lock/mortice lock for door shutter etc as per architectural drawings complete all as specified and directed. |
| 70 | S&F of sheet glass 4 mm thick n.exc 0.5 sqm in each pane fixed in aluminium or wooden windows complete all as specified and directed. |
| 71 | S&F of 4.0 mm thick figured glass, pin headed type and glazed oil putty in square, not 0.50 sqm in each pane complete all as specified and directed. |
| 72 | S&F of 25mm stainless steel curtain rod premium quality including taking down old rod with fittings complete all as specified and directed. |
| 73 | S&F of decorative type SS curtain rod bracket with cap of suitable for 25mm dia rod complete all as specified and directed. |
| 74 | Disconnecting existing tanks capacity n.exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same or other position complete all as specified and directed. |
| 75 | S&F of rotational moulded polyethylene water storage tank 500 ltrs capacity cylinderical, vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Part-I including dismantling of old water tank complete all as specified and directed. |
| 76 | S&F in repairs 20mm ball (float) valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed (minimum weight 25mm-455gms) complete all as specified and directed. |
| 77 | S&F of GI tubing 15 mm dia \"medium weight\" and all fittings on walls/ ceilings or laying in floors including taking down old water tubing fixed in any positions complete all as specified and directed. |
| 78 | Cutting chases, pinning in, making good to facings where as required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 79 | S&F of GI tubing 20 mm dia \"medium weight\" and all fittings on walls/ ceilings or laying in floors including taking down old water tubing fixed in any positions complete all as specified and directed. |
| 80 | Taking down and refixing of old GI tubing 15mm dia fixed on any position for laying of APP sheets including necessary cleaning of pipes complete all as specified and directed. |
| 81 | Taking down and refixing of old GI tubing 20mm dia fixed on any position for laying of APP sheets including necessary cleaning of pipes complete all as specified and directed. |
| 82 | S&F in repairs of 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 83 | S&F in repairs vitreous china squatting pan, Orissa pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR, P or S trap complete all as specified and directed. |
| 84 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400 mm including cutting for and pinning in ends of brackets or erecting stand including 32mm PTMT waste coupling and 32mm corrugated waste pipe complete all as specified and directed. |
| 85 | S&F of 600x450mm plain edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 86 | S&F in repairs 15mm bore dia, chromium plated, stop valve/angle cock, but fancy type, chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed. |
| 87 | S&F in repairs 15mm bore, fancy type, chromium plated, long body bib tap of cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 88 | S&F in repairs 15 mm tall body pillar taps, cast copper alloy, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed. |
| 89 | S&F in repairs for 10 ltrs capacity PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC flushing pipe of suitable length and PVC connection 450mm long complete all as specified and directed. |
| 90 | S&F of PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified and directed. |
| 91 | S&F of glass shelf with CP bracket 55cm (min) long including necessary fixing screws and PVC rawl plugs complete all as specified and directed. |
| 92 | S&F of 5mm thick corner glass shelf (CP bracket) of size not less than 225x225mm with SS railing fixed with SS screws and PVC rawl plug complete all as specified and directed. |
| 93 | S&F in repairs brass chromium plated shower rose 100mm dia or width with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 94 | S&F of soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 95 | S&F of brass chromium plated tubular towel ring complete all as specified and directed. |
| 96 | S&F of brass, chromium plated, tubular towel rail, 20mm dia, D type, 600mm long between flanges complete all as specified and directed. |
| 97 | S&F of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 98 | S&F of stainless steel kitchen plate rack made out of 1mm thick sheet of type SS 304 grade of size minimum 750x600x250mm of best quality of approved make complete all as specified and directed. |
| 99 | Taking down of PVC rain water pipes and waste water pipe or gas pipe(any size or pattern) in any position, including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed. |
| 100 | S&F of 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall with PVC clamps complete all as specified and directed. |
| 101 | S&F of 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 102 | S&F of 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamps complete all as specified and directed. |
| 103 | S&F of 110mm bore PVC (SWR), bends of any radius with access door complete all as specified and directed. |
| 104 | S&F of 75mm bore PVC (SWR), bends of any radius with access door complete all as specified and directed. |
| 105 | S&F of PVC 110mm bore (SWR) branch piece, double (double Y) with access door equal or unequal complete all as specified and directed. |
| 106 | S&F of 110mm bore PVC (SWR) junction double (double T) with access door equal or unequal complete all as specified and directed. |
| 107 | S&F of 75 mm bore PVC (SWR) junction (single T) with access door equal or unequal complete all as specified and directed. |
| 108 | S&F of 110mm bore PVC (SWR) junction (Single T) with access door equal or unequal complete all as specified and directed. |
| 109 | S&F of 110/75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 110 | M&L for 75mm bore PVC (SWR) floor trap/multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 111 | Demolition of brick or stone masonry built in cement mortar etc complete all as specified and directed. |
| 112 | M&L for brickwork with fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 113 | M&L for brickwork with sub-class `B` bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 114 | M&L for 10mm thick cement plaster on roof over PCC surfaces in CM 1:3 finished even and smooth (without using extra cement) and using WPC of approved make as per manufacturers instruction including taking down old plaster and cleaning of surface with water complete all as specified and directed.Note:- WPC shall be measured and paid seperately. |
| 115 | M&L for priming newly plastered roof surfaces with glass fibre base bitumen felt, grade 2 at the rate of 1 litre/sqm complete all as specified and directed. |
| 116 | M&L for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick, reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bitumen primed surface by hot torch application complete all as specified and directed. |
| 117 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in hard dense soil including removal of surplus soil outside MD land complete all as specified and directed. |
| 118 | M&L for reinforced cement concrete (nominal mix) in type A1:1:1½:3 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 119 | M&L for reinforced cement concrete (nominal mix) in type A1:1:1½:3 (20 mm graded stone aggregate) walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified and directed. |
| 120 | M&L for reinforced cement concrete (nominal mix) in type A1:1:1½:3 (20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 121 | M&L for TMT reinforcement bars 10mm and over cut to length, bent to shape as required including cranking, bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc) complete all as specified and directed. |
| 122 | All as per item No. 113.00 here-in-before but 6 to 8 mm dia bar. |
| 123 | M&L for use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter surface flat and rough finished surfaces complete all as specified and directed. |
| 124 | M&L for use and waste for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter surface flat and fair finished surfaces complete all as specified and directed. |
| 125 | M&L for use and waste for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n.exc 10cm wide flat and rough finished surface complete all as specified and directed. |
| 126 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 127 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 128 | M&L for 16 to 18 mm thick granite work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms, working table and like laid over 20 mm thick screed bed or bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 129 | Taking down carefully SS railing upto height of 1.00m (max) by cutting welding and refixing properly at the other location by welding and polishing including replacement of damaged and unseviceable parts as required complete all as specified and directed. Note:- Parts replacement will be measured and paid separately under relevant items. |
| 130 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size complete all as specified and directed. |
| 131 | Dismantling carefully of existing kota stone flooring of any size and thickness laid bedded in cement mortar including removing and cleaning of old screed beds and slurry and making serviceable to refix complete all as specified and directed. |
| 132 | Refixing of old kota stone at same location over 20mm thick cement screed bed including grinding and mirror polishing upto satisfaction of engr-in-charge complete all as specified and directed. |
| 133 | Supply only 150mm dia (internal dia) salt glazed stoneware drain pipes, grade “A’ complete all as specified and directed. |
| 134 | Taking down carefully copper/aluminium point wiring concealed/casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 135 | Dismantling/taking down of unserviceable distribution boards with MCBs complete all as specified and directed. |
| 136 | Taking down/dismantling of storage type hot water geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and refixing in it position, by connecting inlet and outlet and testing complete all as specified and directed. |
| 137 | Taking down carefully ceiling fans of any size from its position and refixing on its position properly after greasing, varnishing and cleaning complete all as specified and directed.Note-: Grease, varnshing rate will be included in quoted rate. |
| 138 | Taking down and refixing of LED tube light fitting bright 18/20 Watt slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 139 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FRLS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium grade machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non-modular type all accessories/ fitting/ metal flush box/ cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1:3 including necessary plaster and poiinting in cement mortor 1:3 with white wash/distemper/other painting complete all as specifiecd and directed.Note:- Cost of cutting chase and making good shall be included in the quated rates. |
| 140 | All as per item No 131.00 here-in-before but for one switch socket combination 5/6 amp on independent board. |
| 141 | All as per item No 131.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches. |
| 142 | All as per item No 131.00 here-in-before but for one switch socket combination 6 pin 5/15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire. |
| 143 | All as per item No 131.00 here-in-before but for one switch socket combination 6 pin 5/15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire. |
| 144 | All as per item No 131.00 here-in-before but for one light point controlled by 5/6 A two way switches. |
| 145 | S&F in repairs modular switch, single pole, two way, 1 module, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and directed. |
| 146 | S&F of modular switch, 5/6 Amps, ISI marked, 1 module, single pole, one way complete all as specified and directed. |
| 147 | S&F of modular socket outlet, 5 pin 5/6 Amps 2 module complete all as specified and directed. |
| 148 | S&F in repairs modular socket combination 2 in 1, 3 pin, 5 and 15 Amp 2 module, universal complete all as specified and directed. |
| 149 | S&F in replacement ceiling rose 2/3 terminals, 65x25 mm dia polycarbonate isolated complete all as specified and directed. |
| 150 | S&F in replacement modular, stepped type electronic fan regulator single / double module complete all as specified and directed. |
| 151 | S&F in replacement lamp holder insulated PVC/Polycarbonate body with back plate for conduit/batten fittings complete all as specified and directed. |
| 152 | S&F in repairs bell, ding dong type, electric, single phase, 240 volt, AC complete all as specified and directed. |
| 153 | S&F in replacement LED tube light complete fitting 20 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 154 | S&F in replacement LED lamp 10 Watt B22 CDL complete all as specified and directed. |
| 155 | S&F in replacement of white LED tube light fitting two feet 10 watt, slimdesign, 230 volts, including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. Note:- Contractor will produce manufacturer test certificate and min two year warrenty from date of fixing. |
| 156 | S&F in replacement factory made epoxy powder coated distribution board TP&N 4 ways (VTPN MCCB DB) and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated neutral bar, insulated busbar assembly, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid separately. |
| 157 | S&F in replacement MCCB 125 Amp, 3 pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 158 | S&F of sheet metal enclosure, double door type surface mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bardust and vermin proof IP=54, suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately. |
| 159 | S&F in replacement MCB SP suitable for 240 volts, AC supply 6 to 40 Amps with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 160 | S&F in replacement MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 161 | S&F in replacement enviromental friendly building security light fitting made up of pressure die cast alluminium housing with high efficient 30 Watt LED as lighting source and pc over having top opening separate driver compartment with IP-66 Protection and including IK 07 protection suitable galvanized iron pipe \"light grade\" brackets 1 mtr length bent to shape to obtain required shape including clamps, nuts/bolts/washers etc connecting with PVC insulated multistranded copper flexible cable 1.5 sqmm three core copper wire complete all as specified and directed. |
| 162 | S&F in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed.NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 163 | S&F in replacement sheet metal enclosures (IP-43 protection) with socket plug top and MCB\"s with two pin and earth plug and socket complete with one single pole MCB 240 V grade 25/20 Amp complete all as specified and directed. |
| 164 | S&F of exhaust fan AC, single phase, 230/240, 50 HZ Volt of size 300 mm sweep 900 RPM MS body, heavy duty, operating with louvers shutter complete grouting the ragged bolt in wall fixing the frame and exhaust fan fix including louver shutter with frame on the exhaust side and connecting with PVC insulator 3 core 23/0.0076 copper wire rubber insulated from ceiling rose to exhaust fan motor including making circular suitable size of hole in wall with good to finish and matching with existing surfaces for fixing of exhaust fan complete all as specified and directed. |
| 165 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed. |
| 166 | Removing of excavted soil to a distance n. exc. 50 mtr and deposited where as directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 167 | M&L for local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 168 | M&L for providing of unreinforced precast concrete cable cover class LV, type 1 size 250mm x 150mm x 40mm laid flat dry for protection of under ground cable complete all as specified and directed. |
| 169 | M&L for making good the disturbed surface by filling PCC 1:2:4 type B-1 using 20 mm graded course aggregate to match with existing surfaces complete all as specified and directed. |
| 170 | Supply, laying and testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 35 sqmm 3.5 core complete all as specified and directed.Note:- Excavation & earth work and pipe/ sand/ bricks for cable protection shall be measured and paid separately under appropriate item of this schedule. |
| 171 | M&L for GI tubing \"light grade\" galvanized for protection LT cable of size 50 mm bore complete all as specified and directed. |
| 172 | Deduct Schedule of credit (calculation will be done off line) Rs. 33978.00 |
