Tender For Construction Of Creminationshed At Kaveripakkam Town Panchayat., Ranipet-Tamil Nadu

Tender For Construction Of Creminationshed At Kaveripakkam Town Panchayat.; 1 Earth workexcavation and depositingon bankwith initial lead of 10 mts and initiallift of 2 mtrs in hard stiff claystiff backcottonhard red earth, shales murram and gravel stoneyearth and earth mixed with small size boulders SS 20 B etc. complete as per standard specification. 2 Supply andfilling of with Good stone dustincluding cost and conveyance and all labour charges etc. complete 3 Plain cement concrete 1:4:8 (one part of cement, four part of sand and eightpart of aggregate) using 40mm gauge hard broken granite jelly for foundation including cost and conveyance of all materials including labour charges for mixing laying curing watering if found necessary and laid in layers and not move than 30cm. thick etc. as per standard specification. 4 Supply and erectingsteel centeringcharges for sides and sulfides including loading and unloading charges etc. complete as perStandard specification. 5 Supply and fabrication of steelincluding cost and conveyance andloading , unloading charges etc. complete as perStandard specification. 6 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - 7 Brickworkincementin CM 1:5 (onecement five partof sand) mix using bricks size 8 ¼ x 4 ¼ x2 fromapproved killnincludingcost and conveyanceof all materials includinglabourcharges andcuring etc. complete as per standard specifcation. 8 Ceiling Plastering with cement motor 1:3(One part of Cement, and threepart of sand) 10mm thick in all floors including cost and conveyance of all materials etc. complete as per standard specification. 9 Plastering with cement motor 1:5 (One part of Cement, and five part of sand) 12 mm thick in all floors including cost and conveyance of all materials etc. complete as per standard specification. 10 Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc.Complete. 11 Paintingtwo coats using best quality ofEmulsionpaint ofapproved colourincluding cost and conveyance ofall materials and labour charges. 12 Weathering course with concretebroken brickjellyconcrete on20mm. Gauge in pure slaked shell lime over roof slabetc. complete as perstandard of specification. 13 Finishingthe top of Roof with one Coarse of Pressed Tiles over brick Jelly concrete including cost and conveyance and labour charges etc. complete. 14 Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. 15 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 16 Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors.

Refer document

INR 20000.0 /-

INR 10 Lakhs /-