|
| 1 | Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 2 | Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. In Foundation and floors.. Ch-5, S.I. 273 |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (Ch-5 SI-6) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) upto plinth Level. (Ch-5 SI-7 (i)) |
| 5 | Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured upto floor to level. (Ch. 10, SI -504) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-100 in foundation and plinth in: Cement mortar 1:4(1 cement : 4 coarse sand) Ch-6, S.I. 1) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-100 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Ch-6, S.I. 2) |
| 8 | 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level). 1:4 (1 cement : 4 coarse sand). Ch-13, S.I. 584) |
| 9 | Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. (Ch-15, S.I. 15) |
| 10 | Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (Ch-10, S.I. - 12) |
| 11 | Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc complete. Ch-4, S.I. 8. |
| 12 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. Ch-5, S.I. 275 (a) |
| 13 | Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion Ch-5, S.I. - 279 |
| 14 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (Ch. 14, SI-12) |
| 15 | Supply & Fixing of Inauguration Board with emboised/ Carved colour picture & complete tem as per direction of E/I. |
