Tender For Upgradation Of Beml Medical Centre With External And Internal Painting, Vitrified Flooring, Toilets Renovation, Boundary Wall; 1 Preparing the existing surface of ceiling by scrapping, sandpapering removing dust & applying 2 coats of premium plastic emulsion paint of approved colour/shade over a coat of primer & touch up putty of M/s Asian Paints/Berger paints etc.,complete all as specified and Engineer in charge. Note: The rate is deemed to include for 1) Wastages. 2) Removing all splashes, dirt, etc. and leaving premises in a clean state 3) Providing and removal of Scaffolding wherever required. Sq.m 1200.00 2 Preparing the existing old painted surfaces of internal walls by scrapping, sandpapering, removing dust & including providing necessary repairs to cracks by filling the cracks with suitable crack filling compound and applying 2 or more coats of Premium Plastic emulsion paint of approved colour/shade manufactured by M/s. Asian Paints/Berger Paints over a coat of primer and touch up putty wherever necessary etc., complete all as specified and as directed by Engineer in Charge. Note: The rate is deemed to include for Providing & removal of scaffolding wherever necessary b) Wastages. 3) Removing all splashes, dirt, etc. and leaving premises in a clean state. Sq.m 2400.00 3 Preparing the steel surfaces by scrapping & applying two coats of synthetic enamel paint of first quality, approved brand and colur, manufactured by M/S Asian paints/ Berger etc., ,complete all as specified and Engineer in charge. Note: Note: The rate is deemed to include for Providing & removal of scaffolding wherever necessary b) Wastages. 3) Removing all splashes, dirt, etc. and leaving premises in a clean state. Sq.m 750.00 4 Preparing the existing old painted wooden surface surfaces and by scrapping, sand paper/wire brushing and applying one coat of synthetic enamel paint of first quality approved brand or of reputed manufacturer like M/s. Asian Paints/Berger conforming to relevant IS for walls including providing and removal of scaffolding/ ladder, wastages etc., complete all as specified and as directed by engineer in charge. Note: The rate is deemed to include for Providing & removal of scaffolding wherever necessary b) Wastages. 3) Removing all splashes, dirt, etc. and leaving premises in a clean state. Sqm 150.00 5 Dismantling the existing old wall tiles / skirting including cement mortar backing layer and disposal of unservicebale materials from the premises etc.,complete all as specified and directed by engineer in charge.Note: The dismantled materials should be removed immediately from the premises without disturbing the regular working activities and the quoted rate includes all lead and lift etc. Sqm 700.00 6 Rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete surfaces including finishing the surface even &smooth, curing, tools & tackles etc., complete all as specified and directed by Engineer-in-charge. Sqm 2850.00 BEML LIMITED, BANGALORE COMPLEX Tender : 6300039660 Date: ISSUED TO: Period of contract: EMD : SUB: Upgradation of BEML Medical centre with external and internal painting, vitrified flooring, toilets renovation, boundary wall SCHEDULE A - BILL OF QUANTITIES 7 Preparing the existing plastered wall surface (previous tiled Surface) by scrapping with sand paper,providing necessary hacking etc., and providing and fixing wall tiles of minimum size 600mm x 300mmx8mm thick or bigger size of approved colour/pattern laid over a backing coat of Cement Mortar 1:4,15mm thick manufactured by M/s RAK/Johnson/Kajaria/Somany or equivalent approved make and joints neatly finished and pointed with jointing powder of matching colour pigment etc., complete all as specified and directed by Engineer-in-Charge. Note: 1) The rate is deemed to include for providing a dubbing coat of 15mm thick in Cement Mortar 1:6 on irregular face of walls. 2) Wastages. etc,complete all as specified and as directed by Engineer in charge. Sqm 700.00 8 Preparing the existing old Painted surface of external walls by washing, scrapping the existing surface by sand papering/wire brushing including providing necessary repairs to cracks, and cleaning the surface from dust, dirt and filling/closing the cracks with crack filling compound and applying two coats of exterior emulsion paint of first quality approved brand and colour manufactured by M/s.Asian Paints (APEX ULTIMA)/Berger Paints (Weather coat Allguard) over a coat of primer and touch up putty wherever necessary etc., complete all as specified and directed by engineer in charge. Note.1) Contractors quoted rate is deemed to include for 1. providing and removal of scaffolding, staging/ suspending jhoola for painting wherever necessary 2) Wastages. 3) Removing all splashes, dirt, etc. and leaving premises in a clean state. Sqm 1500.00 9 Hacking the existing old mosaic flooring tiles by mecahnical means, & providing & laying over the existing mosaic flooring 10mm thick premium quality glazed/matt vitrified tiles of approved size, shade, pattern, manufactured by M/s. RAK/ Johnson/ Kajaria/Somany in flooring & skirting (150 mm height approximately), & fixed with epoxy based tile adhesive of M/s FOSROC/ROFF/equivalent for flooring and Cement mortar 1:4 15 mm thick backing coat for skirting, The tiles shall be provided with 3mm spacers wtih epoxy tile grout of approved colour of M/s. Roff/Fosroc for the joints etc., complete all as specified & directed by the Engineer in Charge. Note: (1) Skirting tiles will be measured and paid on area basis. (2) The quoted rate is deemed to include for all wastages.(3) The basic cost of tiles shall range between Rs 90/sft to Rs.120/Sft inclusive of GST and shall be approved by Engineer in charge. SQM 1350.00 10 Removing the Wooden door shutter of size approximately 1.05m x 2.10m carefully by manual means carefully without breaking, stacking at a place all as shown & refixing back the shutter in the shown location with necessary modifications including altering the height of shutter if required including providing & fixing all necessary hardware items viz., brass chromium plated handle, 125 mm size brass butt hinges, brass chromium plated tower bolt, aldrop etc., complete all as specified and as directed by Engineer in charge. Note: The rate quoted is deemed to include for making good the adjacent portion of wall/plastering if damaged during dismantling. Nos. 30.00 11 Removing the existing old MS Windows with out damaging the adjacent walls, providing patch plastering in CM 1:6 Wherever required to make good the surface for fixing new windows and supplying and fixing new UPVC Glazed ventilator of standard UPVC Profile sections of approved brand manufactured by M/s LG/ Prominance /Veka of approved shade/colour and fixed with 5.5mm thick glazing in louvers including weather sealed beading gaskets etc., to make them weather protected and free from rattling including all necessary standard hardware like handles, screws etc complete to suite the overall size of openings all as directed and specified by the Engineer in charge. Sqm 25.00 12 Supplying and fixing in position 20 mm thick polished black granite slab for steps (treads & risers) with front edge bull nosed over a bedding layer of 15 mm thick in cement mortar 1:6 including providing groove of 6mm width for antislipping etc., complete all as specified & directed by Engineer in charge. Note: The rate quoted for the item deemed to include for wastages & dismentaling the existing floor for fixing. sqm 15.00 13 Providing & constructing Burnt brick masonry of required thickness in Cement Mortar 1:6 using first class table moulded bricks including necesssary curing etc., complete all as specified and directed by Engineer in charge. Note: The rate quoted is deemed to include for providing and removal of scaffolding/staging wherever necessary. Cum 15.00 14 WALL PANELLING : Supplying and fixing wall panelling with 12mm thick BWP plywood conforming to relevant IS & exposed surfaces finished with 1mm thick laminate sheet manufactured by Greenlam/Century/Merino of approved colour & design/pattern and fixed firmly to 50mmx50mm size salwood framework at 600mm c/c horizontally and vertically walls, including teakwood beading of required size wherever required, including applying melamine polish with a coat of wood filler/adhesives including necessary hardware/accessories viz, nails, screws, adhesives including polishing to the exposed beading surfaces etc., complete all as specified and directed by Engineer in charge. Note: The rate quoted is deemed to include for any wastages etc. The door also to be provided with panelling sheets on both faces. rate includes for the same Sqm 150.00 15 ROLLER BLINDS : Providing and fixing 100mm wide venitian blinds of window fashion fabric of M/sM/s Vista Levalor/Mac/Hunter Douglas make, with 50mm thick powder coated channel with balance, imported crylic self alignable mechanism and equally placed spacers a, imported tilting of approved shade/colour and design etc., complete including all necessary accessories and hard ware items all as specified and as directed by Engineer In Charge. Sqm 20.00 16 Providing and fixing 15 mm thick Tiled false ceiling with tegular edge manufactured by M/s. Armstrong in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections. The tiles shall be fixed in position on STICHED TRULOK/24 mm PRELUDE exposed system hot dipped galvanized steel with white precooked exposed can and the frame shall comprise of:- 24mmX38mm- Main Tee of 3600mm 24mmX30mm-Cross Tee 0f 1200mm 24mmX25mm-Cross Tee of 600mm 22mmX22mm-Wall Angle of 3000mm length The G.I. Wall angle to be fixed the G.I. Wall angle to be fixed along the perimeter fixed with screws/rawl plugs. The GI Main runners spaced at 1200 mm counters securely fixed to the structural soffit by approved hangers of 2.0mm GI wire pre stressed at 1200mm Max. centers. Flush fitting 1200mm long cross tee. To be interlocked between main runners at 6oo mm centers. The 600mm cross tees are placed between 1200mm Cross Tee (parallel to main runner) to form a 600 X 600 mm module. Extra suspension to be provided around light fixtures. Make: M/s. ARMSTRONG Sqm 45.00 17 Removing the damaged glass panels from the existing steel windows carefully and stacking at a place all as shown and providing and fixing new 5mm thick glass to the existing steel window shutter frame with necessary putty etc., complete all as pecified and directed. Sqm 100.00 18 Dismantling the exisintg partly wooden partly glazed partition with doors, or wooden wall paneling of any description including beadings, hardware items etc., , etc., and stacking at a place all as showns and handing over to beml the serviceable material and disposal of non serviceable material outside the premises not objected by local civic authorities etc., complete. SQm 60.00 19 Dismantling the exisintg partly glazed aluminium partition with doors , etc., and stacking at a place all as showns and handing over to beml SQm 90.00 20 Supplying and fixing/installing new powder coated aluminium partitions with openable doors as per design of required height using standard aluminium sections manufactured by M/s. Jindal/ Hindalco/ Indal/ equivalent make, conforming to relevant IS, comprising of rectangular hollow tubes measuring not less than 63.5mm x 38.10mm x 2.50mm for outer frame, verticals and horizontals. The minimum thickness of the powder coating shall be 50 microns. The centre to centre distance between the vertical members shall not be more than 1.2 m approximately. The partition shall comprise of 12mm thick both sides decorative prelaminated particle board of approved colour and shade conforming to relevant IS manufactured by M/s.Archid/ Kitply/ National/Greenply along with 5mm thick plain / frosted glass conforming to relevant IS manufactured by M/s. Modiguard / SaintGobain, including necessary hardware and accessories viz., EPDM rubber / neoprene gaskets, snap beading, aluminium glazing clips, screws, including locking arrangement for all doors, heavy duty door stopper,spring closer/ heavy duty hydraulic door closer, tower bolts, Stainless steel D/H handle etc., complete as per site conditions and all as specified and directed by Engineer in charge. Sqm 120.00 21 Supplying and fixing new powder coated aluminium double leaf openable door along with fixed partition at top and either sides as per approved design and colour, of required height using standard sections manufactured by M/s. Jindal/ Hindalco/ Indal make, conforming to relevant IS. The top, middle and side members of openable door shall comprise of sections measuring not less than 50mm x 44.50mm x 1.50mm. The bottom panel shall comprise of sections measuring not less than 101.60mm x 44.45mm x 1.50mm. The minimum thickness of the powder coating shall be 50 microns. The complete panel of the door shall be fixed with 5mm thick plain / frosted glass conforming to relevant IS manufactured by M/s. Modiguard/ Saint Gobain, including necessary hardware and accessories viz., EPDM rubber / neoprene gaskets, snap beading, aluminium glazing clips, screws, handles, locking arrangement, floor spring of approved brand manufactured by M/s. Dorma/Everite/Hardwyn etc., complete as per site conditions and all as specified and directed by Engineer in charge. Sqm 35.00 22 Removing the damaged wooden door shutters carefully from the frames and p / f new 32 mm thick wooden flush doors including all necessary hardware items like brass 125 mm size butt hinges, brass CP handles, lock, tower bolt and aldrop etc., Sqm 30.00 23 Removing the old aluminium aldrops and providing and fixing new brass chromium plated aldrop to the existing flush doors including lall necessary hardware etc., Nos. 30.00 24 Removing the old aluminium 150 mm size handles providing and fixing new brass chromium plated handle to the existing flush doors including lall necessary hardware etc., Nos. 30.00 25 Dismantling the existing granite platform of any thickness with the supporting walls and stacking at a place all as shown… and Supplying and fixing new 40mm thick polished black Granite slab on brick support walls including cut out for fixing of Stainless steel Sink and jointed neatly with cement mortar and pointed with black oxide or coloured cement compound to match the colour of granite including cutting to template and grinding the edges nosing half round to the slab to fix SS Sink etc complete all as specified and directed by Engineer in charge. Note: The quoted rate is inclusive of a) cutting the granite to template to fix the SS Sink. b) wastages. c) Brick wall supports will be measured & paid seperately under relevant item.d) the SS sink will be measured and paid in the relevant item. Sqm 3.50 26 Supplying and fixing new single bowl Stainless steel Kitchen Sink -satin finish of approved model 1.0mm thick with minimum size not less than 525mmx450mm (18x21 x 8 depth) approximately manufactured by M/s. Carysil/Nirali/Futura/Jindal/Franke(610 X INSTI) fixed over 25mm thick Granite slab & jointed neatly finished with cement mortar and pointed in cement slurry/jointing powder with coloured matching pigment including all acccessories viz., waste coupling, waste pipe etc., complete all as specified and directed by the engineer-in-charge. Note: 1. The rate quoted for this item should be excluding 20mm thick granite slab which will be measured and paid separately under relevant item. 2. The Contractor shall submit the warranty certificate from the manufacturer to BEML) No 1.00 27 Supplying & fixing in position M/s. Jaquar (ARI39347S/SOL-6347/FLR-5347N) make swan neck brass chromium plated wall mounted sink cock with swinging spout with wall flange with necessary hardware/accessories etc., complete all as specified and directed by Engineer in charge. (Note: The warranty certificate from the manufacturer shall be submitted to BEML) No 1.00 B External chamber and pipe works 28 Earthwork excavation by mechanical/manual means not exceeding 1.50m in width and not exceeding 1.50m in depth and not exceeding area 10 sqm on plan in all kinds of soil but excluding hard rock for foundation/ pits including getting out the excavated earth, with a lead upto 50 mts, including dressing of sides, dewatering ground water/rain water, compaction including disposal of debris outside the site premises which is not objected by any civic authorities etc., complete all as specified and directed by Engineer in charge. Cu.M 50.00 29 Providing & fixing 160mm diameter 6kg/cm2 PVC pipes manufactured by M/s.Supreme/ Astral or equivalent conforming to relevant IS for sanitary, waste water, laid in gradient in walls/floors including all standard PVC fittings like elbows, bends, Tees, & fixtures such as pipe clips, PVC clamps wooden plug, screws, washers etc fixed/ secured firmly etc.,complete all as specified and directed by Engineer in charge. Note: The rate quoted is deemed to include for providing and removal of scaffolding/staging wherever necessary. Rmt 80.00 30 Providing and laying Plain Cement Concrete of mix proportion 1:2:4 average 75mm thick using 20mm/12.5mm graded granite aggregates for flooring, laid to a proper slope & gradient, well compacted,mechanical/manual mixing including curing etc., complete all as specified and directed by the Engineer in charge. Cu.M 6.50 31 Returning & filling under floors layer by layer including consolidation, well ramming etc., complete all as specified and as directed by engineer in charge. Cum 30.00 32 Supplying and fixing in position Pre-cast/cast in situ RCC manholes cover with frame of approx size 600x 600x 100mm, or bigger size as per the requirement heavy duty including formwork for cast-in-situ work etc complete all as specified and directed by Engineer in charge. Each 23.00 C TOILET RENOVATION 33 Dismantling the existing old mosaic floor/wall tiles including cement mortar bedding layer and disposal of unservicebale materials from the premises etc.,complete all as specified and directed by engineer in charge.Note: The dismantled materials should be removed immediately from the premises without disturbing the regular production activities and the quoted rate includes all lead and lift etc. Sqm 260.00 34 Dismantling the existing PCC concrete of any description and thickness and disposal of debris from the premises etc., complete all as specified and directed by engineer in charge.Note: The dismantled materials should be removed immediately from the premises without disturbing the regular production activities and the quoted rate includes all lead and lift etc. Cum 5.00 35 Earthwork excavation by mechanical/manual means not exceeding 1.50m in width and not exceeding 1.50m in depth and not exceeding area 10 sqm on plan in all kinds of soil but excluding hard rock for foundation/ pits including getting out the excavated earth, with a lead upto 50 mts, including dressing of sides, dewatering ground water/rain water, compaction including disposal of debris outside the site premises which is not objected by any civic authorities etc., complete all as specified and directed by Engineer in charge. Cu.M 7.00 36 Preparing the existing surface by cleaning, hacking etc., & Supplying and fixing Anti skid ceramic coloured floor tiles of minimum 300 mmX300 mmx8mm thick or bigger size of approved colour/pattern laid over a bedding layer of CM 1:4,15mm thick manufactured by M/s Johnson/RAK/Kajaria/Somany approved make to proper slope and joints neatly finished and pointed with jointing powder of matching colour pigment etc., complete all as specified and directed by Engineer-in-Charge. Note: 1)The rate quoted is deemed to include for all wastages. 2) The rate is deemed to include for dismantling the existing old mosaic floor tiles in any thickness, hacking out old plastering & disposal of unserviceable materials from the premises. Sqm 50.00 37 Supplying and fixing coloured ceramic dado tiles for dado minimum size 600mm x 300mmx8mm thick or bigger size of approved colour/pattern laid over a backing coat of Cement Mortar 1:4,15mm thick manufactured by M/s Johnson/RAK/Kajaria/Somany approved make and joints neatly finished and pointed with jointing powder of matching colour pigment etc., complete all as specified and directed by Engineer-inCharge. Note: 1) The rate is deemed to include for providing a dubbing coat of 15mm thick in Cement Mortar 1:6 on irregular face of walls. 2) Wastages. 3) The rate is deemed to include for dismantling the existing old mosaic wall tiles in any thickness, including existing old washbasin, hacking out old plastering & disposal of unserviceable materials from the premises. Sqm 375.00 38 Supplying and Laying the 20mm diameter, heavy grade CPVC water tubing manufactured by M/s.Supreme/Astral/Ashirwad/equivalent approved make, laid in required length/gradient in walls, flooring & trenches including all standard CPVC fittings such as elbows, collars, Tees, MTA, FTA, PVC Clamps including cutting & making good the floor/walls with cement mortar wherever necessary etc., complete all as specified and directed by Engineer-in-charge. Note: The rate quoted is deemed to include for providing and removal of scaffolding/staging wherever necessary. Rmt 100.00 39 Supplying and fixing 15 mm diameter brass chromium plated angle cock of first quality manufactured by M/s.ESS ESS /Parryware/Johnson/ Hindware or equivalent make including all accessories conforming to relevant IS etc., complete all as specified and directed by Engineer in charge. No 50.00 40 Supplying & fixing 15mm diameter brass chromium bib cock of first quality approved brand manufactured by M/s.ESS/ Parryware/Hindware/JOHNSON or equivalent make including all accesories conforming to relevant IS etc., complete all as specified & directed by the Engineer in charge Nos 12.00 41 Providing & fixing 110mm diameter 6kg/cm2 PVC pipes manufactured by M/s.Supreme/ Astral or equivalent conforming to relevant IS for sanitary, waste water, laid in gradient in walls/floors including all standard PVC fittings like elbows, bends, Tees, tail pieces & fixtures such as pipe clips, PVC clamps wooden plug, screws, washers etc fixed/ secured firmly etc.,complete all as specified and directed by Engineer in charge. Note: The rate quoted is deemed to include for providing and removal of scaffolding/staging wherever necessary. Rmt 50.00 42 Providing & fixing 75mm diameter 6kg/cm2 PVC pipes manufactured by M/s.Supreme/ Astral or equivalent conforming to relevant IS for sanitary, waste water, laid in gradient in walls/floors including all standard PVC fittings like elbows, bends, Tees, tail pieces & fixtures such as pipe clips, PVC clamps wooden plug, screws, washers etc fixed/ secured firmly etc.,complete all as specified and directed by Engineer in charge. Note: The rate quoted is deemed to include for providing and removal of scaffolding/staging wherever necessary. 50.00 43 Supplying and fixing new vitreous chinaware floor mounted European type water closet with low level PVC flushing cistren of 12 litres capacity of first quality, conforming to relevant IS, Manufactured by M/s Parryware/Hindware make including white PVC seat cover, 450 mm long PVC Connecting pipe, P or S Trap with concealed brackets, flush pipe, drain outlet fittings and necessary fittings, fixtures and hardware including making good the walls/floor wherever required etc., complete all as specified and directed by the Engineer in charge. No 12.00 44 Providing and fixing new vitreous china ware Orrisa type pan water closet squatting pan of approximate size 580 mm (Indian type W.C. pan) manufactured by M/s. Parryware/Hindware make with 110 mm bore P or S trap, 10/12 litre capacity P.V.C. low level flushing tank with manually controlled device conforming to relevant IS, manufactured by M/s. Parry Ware / M/s.Hindware including foot rests, 32mm diameter PVC flush pipe, 450mm length PVC connection pipe, cutting and making good the walls and floors wherever required including all lead, lift, tools, labour etc., complete all as specified and directed by the Engineer-in-charge. No 5.00 45 Supplying and fixing vitreous chinaware white wall hung flat back ceramic urinal basin Model: C0583/C0575 (Combo set) of size minimum 380mmx405mmx590mm or bigger the size manufactured by M/s. Parryware/ Hindware/Cera/equivalent approved make including, flush pipe, waste coupling, waste pipe, accessories etc., of reputed manufacturer conforming to relevant IS etc complete set and fixing / bedding urinal against wall in cement mortar 1:2, securing urinal with bolts including brass screws, pointing around urinal back in cement mortar and with all drain outlet fittings.etc., complete all as specified and directed by the Engineer-in-charge. No 2.00 46 Supplying and fixing Brass chromium plated Urinal Spreader of first quality approved brand conforming to relevant IS etc., manufactured by M/s Parryware/Hindware/Cera with all fittings & fixtures etc.,complete all as specified and directed by Engineer-in-charge. Nos 2.00 47 Supplying and fixing brass chromium plated Push cock of first quality approved brand conforming to relevant IS etc., manufactured by M/s Parryware/Hindware/Cera/ etc.,complete all as specified and directed by Engineer-in-charge. Nos 2.00 48 Supplying and fixing 1mx1.3m or approved size bevelled edge mirror of M/s. Saint Gobain/ Modiguard conforming to relevant IS, mounted on 6mm thick BWP Plywood and fixed to wooden plugs with chromium plated brass screws all necessary hardware etc.,complete all as specified and directed by Engineer-in-charge. Nos. 15.00 49 Supplying and fixing white vitreous chinaware hand wash basin of size 600x450mm approximately or approved size manufactured by M/s. Parryware / Hindware /M/s.Cera/equivalent approved make conforming to relevant IS, with white vitreous china full height pedestal including all acccessories such as brass chromium plated waste coupling, PVC connection pipe of length 450mm, brass chromium plated angle cock / stop cock 32mm diameter PVC waste pipe, rack bolts, screws, etc., all lead, lift, etc., complete all as specified and directed by the engineer-in-charge. No 14.00 50 Supplying and fixing 15mm diameter brass chromium plated quarter turn pillar cock of first quality conforming to relevant IS manufactured by M/s.ESS /Parryware/ Hindware/ equilvalent approved make including necessary accessories etc., complete all as specified and directed by Engineer in charge. Each 20.00 51 Supplying & fixing PVC SWR Gully trap 125/110mm of M/s.Supreme including jointing with solvent cement.etc., complete all as specified and directed by Engineer in charge. Each 30.00 52 Supplying & fixing PVC Nahani trap 75/100mm including jointing with solvent cement of Supremeetc., complete as specified and directed by Engineer in charge. Each 30.00 53 Supplying & fixing 100mm dia chromium plated grating conforming to relevant IS etc., complete all as specified and directed by Engineer in charge. Each 45.00 54 Dismantling of Wooden door shutters with frames of any size & thickness carefully without damaging the adjacent surfaces and handing over to Civil Maintenance Department in good condition and Supplying and fixing WPC heavy duty door shutters with frames manufactured by Greenply/ Centuryply/ equivalent approved make with shutter thickness of 30mm of approved shade & size conforming to relevant IS as per manufacturers specification etc including necessary hardware viz., Stainless steel hinges, tower bolts, handles, hardware items etc.,complete all as specified and directed by Engineer in charge. Sqm 25.00 55 Supplying and fixing health faucet with flexible connection pipe, hook, full set etc., complete all as specified and directed by the Engineer in charge. No 15.00 56 Supplying and fixing brass chromium plated towel rail 600mm long of M/s. parryware /ESS/Hindware with all fittings, acessories etc., complete all as specified and directed by the Engineer in charge. Nos 20.00 57 Supplying & fixing 110 mm diameter PVC Air vent cowl Manufactured by M/s Supreme/Astral conforming to relevant IS etc including all fittings & fixtures etc., complete all as specified and as directed by Engineer in charge. Each 15.00 58 Providing and fixing of 20mm thick both sides polished black granite slab for urinal partition of approximate size 1.2m x 0.6m and fixing in wall with cement mortar 1:3 etc., complete all as specified and directed by engineer in charge. Each 1.00 59 Providing and fixing brass chromium plated double coat hooks of M/s. Parryware/ Hindware etc., complete all as specified and directed by engineer in charge. Nos. 20.00 60 Providing and fixing brass chromium plated toilet paper holder with flap of M/s. Parryware/ Hindware etc., complete all as specified and directed by engineer in charge. Nos. 4.00 61 Supplying and fixing 300mm diameter heavy duty, steel body exhaust fan manufactured by M/s.Bajaj/USHA brand conforming to relevant IS with all fittings & fixtures etc.,complete all as specified and directed by Engineer-in- charge. Each 16.00 NOTE-1 The rate quoted for the above items is deemed to include for providing and removal of scaffolding/ staging wherever necessary. 2- The contractors/prospective bidders shall visit the site and acquaint themeselves with the site conditions before submission of bid/quote
