CONSTRUCTION OF SMART VILLAGE OFFICE ALAPPUZHA WEST -- 1 CIVIL WORKS-GROUND FLOOR 2 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees andsaplings of girth up to 30 cm measured at a height of 1 m above ground level andremoval of rubbish up to a distance of 50 m outside the periphery of the area cleared 3 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposedearth to be levelled and neatly dressed.All kinds of soil 4 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundation etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 5 4.1.8:Providing and laying in position cement concrete of specified grade excluding the costof centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarsesand : 8 graded stone aggregate 40 nominal size) 6 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarsesand) 7 5.1.2:Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mmnominal size 8 5.2.2:Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up tot floor five level excluding cost of centering,shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 gradedstone aggregate 20 mm nominal size) 9 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more 10 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope upto 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases up to floor five level excluding thecost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations,footings, bases of columns, etc for mass concrete 12 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weathershade, Chajjas, corbels etc., including edges 13 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspendedfloors, roofs, landings, balconies and access platform 14 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers 15 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns,Pillars, Piers, Abutments, Posts and Struts 16 5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs,(excluding landings ) except spiral - staircases) 17 OD1590/2025-2026:Filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction ofsite Engineer-in-charge 18 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cmor nearest available size confirming to IS 2185 Part I of 1979 for super structure up tofloor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etccomplete 19 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm ornearest available size confirming to IS 2185 part I of 1979 for super structure up tofloor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etccomplete 20 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1cement : 3 fine sand) 21 13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1cement : 4 fine sand) 22 9.123:Providing and fixing factory made door frame (single rebate) made out of single pieceextruded solid PVC foam profile with homogeneous fine cellular structure havingsmooth outer integral skin having 62 mm width & 32 mm thickness, frame willbe mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm& PVC solvent cement, including fixing the frame to wall with suitable dia& length anchor fastener as per manufacturers specification and directionof Engineer-in-charge. 23 9.124.1:Providing and fixing factory made 30 mm thick door shutter made of solid PVC foamprofile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness5 mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power.The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1mm, painted with primer, all four corners of reinforcement to be welded or sealed.Solid PVC extruded bidding (Push fit type) will be set inside the styles and the railswith a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The stylesand rails will be mitred cut and joint with the help of PVC solvent cement & selfdriven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mmx 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle ofthe lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as permanufacturers specifications and direction of Engineer -in-charge.Nondecorative finish 24 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. withM.S. flats, square or round bars etc. including priming coat with approved steel primerall complete.Fixed to steel windows by welding 25 11.16.1:Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12mm, laid infloors, and landings, jointed with neat cement slurry mixed with pigment to match theshade of the tiles including rubbing and polishing complete, on 20 mm thick bed ofcement mortar 1:4 (1 cement : 4 coarse sand) :Light shade pigment using white cement 26 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm. 27 8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, window sills, faciasand similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with whitecement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at alllevels.Area of slab over 0.50 sqm 28 16.21:Engraving letters in hard stone 29 11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. 30 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to bespecified by the manufacturer), of 1st quality conforming to IS : 15622, of approvedmake, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thickcement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with whitecement and matching pigment etc., complete 31 13.43.1:Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer 32 13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 33 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work 34 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade:Two or more coats on new work 35 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50micron) 36 21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick& 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar 37 21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) foraluminium doors including necessary cutting and making good etc. complete 38 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS : 12823 Grade I Type II, in panellingfixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre- laminated particle board with decorative lamination on bothsides 39 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mmthickness 40 OD77514/2024-2025:Providing and fixing hydraulic door closer bottle type M.S body with necessaryaccessories and screws etc complete 41 OD77515/2024-2025:Supplying and fixing name board with emblem using acrylic sheet base with reflectivetype sticker as per required shade and color etc complete. Size of board 3m x 0.6m 42 OD77517/2024-2025:Internal name board size 2.5ft x 1.5ft using acrylic sheet base with reflective typesticker as per required shade and color etc complete 43 OD77525/2024-2025:Supplying and fixing zebra blinds including pivots, pulley system, bottom rod,operating chains etccomplete 44 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dash fastenersof required dia & length (hold fast lugs or dash fastener shall be paid forseparately), using good quality Anjili wood /jack wood 45 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestorywindows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws, excluding panelling which will bepaid for separately, all complete as per direction of Engineerin - charge using Anjili/Jack wood 46 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled andglazed shutters for doors, windows and clerestory windows (Area of opening for panelinserts excluding portion inside grooves or rebates to be measured) paneling forpaneled or paneled and glazed shutters 25 mm to 40 mm thick using good qualityAnjili/ Jack wood 47 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nutsand bolts complete, i/c fixing the railing with necessary accessories & stainlesssteel dash fasteners, stainless steel bolts etc., of required size on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) 48 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting,fixing in position and applying a priming coatof approved steel primer, including welding and bolted with special shaped washersetc. complete 49 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete 50 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoidscratches during transportation and should be supplied in single length upto 12 metreor as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/selftapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch inhorizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters andtrusses and including cutting to size and shape wherever required. 51 16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compactingandproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.paver block of M-30 grade with approved color design and pattern 52 CIVIL WORKS-FIRST FLOOR 53 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more 54 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope upto 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases up to floor five level excluding thecost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 55 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weathershade, Chajjas, corbels etc., including edges 56 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspendedfloors, roofs, landings, balconies and access platform 57 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers 58 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cmor nearest available size confirming to IS 2185 Part I of 1979 for super structure up tofloor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etccomplete 59 50.6.2.2Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm ornearest available size confirming to IS 2185 part I of 1979 for super structure up tofloor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etccomplete 60 13.43.1;Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer 61 13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 62 13.5.1:15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement: 4 coarse sand) 63 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work 64 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1cement : 3 fine sand) 65 13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1cement : 4 fine sand) 66 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade:Two or more coats on new work 67 9.123:Providing and fixing factory made door frame (single rebate) made out of single pieceextruded solid PVC foam profile with homogeneous fine cellular structure havingsmooth outer integral skin having 62 mm width & 32 mm thickness, frame willbe mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm& PVC solvent cement, including fixing the frame to wall with suitable dia& length anchor fastener as per manufacturers specification and directionof Engineer-in-charge. 68 9.124.1:Providing and fixing factory made 30 mm thick door shutter made of solid PVC foamprofile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness5 mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power.The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1mm, painted with primer, all four corners of reinforcement to be welded or sealed.Solid PVC extruded bidding (Push fit type) will be set inside the styles and the railswith a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The stylesand rails will be mitred cut and joint with the help of PVC solvent cement & selfdriven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mmx 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle ofthe lock rail & fixed with styles with the help of PVC solvent cement & selfdriven self tapping screws of size 100 mm x 8 mm complete as per manufacturers specifications and direction of Engineer -in-charge.Non decorative finish 69 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. withM.S. flats, square or round bars etc. including priming coat with approved steel primerall complete.Fixed to steel windows by welding 70 11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. 71 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to bespecified by the manufacturer), of 1st quality conforming to IS : 15622, of approvedmake, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thickcement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with whitecement and matching pigment etc., complete. 72 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm. 73 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50micron) 74 21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) foraluminium doors including necessary cutting and making good etc. complete 75 21.3.2;Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mmthickness 76 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nutsand bolts complete, i/c fixing the railing with necessary accessories & stainlesssteel dash fasteners, stainless steel bolts etc., of required size on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) 77 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dash fastenersof required dia & length (hold fast lugs or dash fastener shall be paid forseparately), using good quality Anjili wood /jack wood 78 50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestorywindows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws, excluding panelling which will bepaid for separately, all complete as per direction of Engineerin - charge using Anjili/Jack wood 79 50.9.4.1;Providing and fixing paneling or paneling and glazing in paneled or paneled andglazed shutters for doors, windows and clerestory windows (Area of opening for panelinserts excluding portion inside grooves or rebates to be measured) paneling forpaneled or paneled and glazed shutters 25 mm to 40 mm thick using good qualityAnjili/ Jack wood 80 OD14290/2025-2026:Supplying and fixing zebra blinds including pivots, pulley system, bottom rod,operating chains etccomplete 81 PLUMBING WORKS 82 17.3.2:Providing and fixing white vitreous china pedestal type water closet (European type)with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangementwith specials of standard make and mosquito proof coupling of approved municipaldesign complete, including painting of fittings and brackets, cutting and making goodthe walls and floors wherever required :W.c. pan with ISI marked black solid plasticseat and lid 83 17.32.2:Providing and fixing mirror of superior glass ( of approved quality) and of requiredshape and size with plastic moulded frame of approved make and shade with 6 mmthick hard board backing :Rectangular shape 453x357 mm 84 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Wash basinsize 630 x 450 mm with a single 15 mm C.P. brass pillar tap 85 17.73.2:Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleatswith CP brass screws with concealed fitting arrangement of approved quality andcolour600 mm long towel rail with total length of 645 mm, width 78 mm and effectiveheight of 88 mm, weighting not less than 190 gms 86 18.16.1Providing and fixing brass stop cock of approved quality :15 mm nominal bore 87 18.32.1:Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm(inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation,foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mmnominal size) and inside plastering with cement mortar 1:3(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design:With common burnt clay F.P.S (non modular) bricksof class designation 7.5 88 18.35.1:Constructing masonry chamber 120x120x100 cm inside, in brick work in cementmortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100 mmtop diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid andRCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grades stone aggregate 20 mmnominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 finesand : 10 graded stone aggregate 40 mm nominal size) and inside plastering withcement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floatingcoat of neat cement complete as per standard design:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 89 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank. 90 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming toIS standards and weighing not less than 690 gms.15 mm nominal bore 91 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS: 893115 mm nominal bore 92 18.58.2.1:Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mmdiameter of the inner hinged round grating 93 18.65:Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102mm, height of 75 mm with concealed fittings arrangements, weighing not less than106 gms. 94 50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make )including cost of materials and labour charges etc complete as per the direction of siteEngineer-in-charge. 95 50.18.7.2.1:Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00metre spacing. This includes jointing of pipes & fittings with one step PVCsolvent cement and testing of joints complete as per direction of Engineer-in-Charge20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall 96 50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer- in- Charge 25 mmdia 12 Kgf/cm2 - Internal work - Exposed on wall 97 50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 32 mmdia 10Kgf/cm2- Internal work - Exposed on wall 98 50.18.7.5.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at1.00m spacing. This includes jointing of pipes & fittings with one step PVCsolvent cement and testing of joints complete as per direction of Engineer-in-Charge40 mm dia 10 Kgf/cm2- Internal work- exposed on wall 99 50.18.7.6.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 10 Kfg/cm - Internal work- Exposed on wall 100 50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge. Concealed workincluding cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2pipe1.000 25.000 25.000 101 50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 102 50.18.9.20.6:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement -63x63x63 mm dia Door Tee 103 50.18.9.20.8:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 63 mm dia End cap 104 50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Elbow 105 50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement- 110 mm dia Bend 106 50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, includingjointing with PVC solvent cement - 110x110x110 mm dia Door tee 107 OD13289/2025-2026:Providing and fixing 1/2 HP SINGLE PHASE pump set connected with existing PVCline with all connection such as gate valve,foot valve,bend,elbow,including allmaterials and labour charges etc.complete 108 OD13288/2025-2026:Supplying and installing ready made ferrocement Septic tank with soak pit includingthe cost of carriage, trenching, placing at the level below ground level as specified asper the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregatefor the preparation of bed shall be paid separately)25 to 30 flush capacity 109 ELECTRICAL WORKS 110 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVCconduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C 111 1.12:Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductorsingle core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing asrequired. 112 1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessed mediumclass PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 113 1.14.4:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessed mediumclass PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 114 1.14.6:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessed mediumclass PVC conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire 115 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.15/16 amp switch 116 1.24.5;Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.6 pin 15/16 amp socket outlet 117 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existingmodular plate switch box including connections but excluding modular plate etc. asrequired 118 1.26:Supplying and fixing modular blanking plate on the existing modular plate &switch box excluding modular plate as required 119 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 120 1.28.2:Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.3 Module 121 2.13.2;Supplying and fixing following rating, four pole, 415 volts, isolator in the existingMCB DB complete with connections, testing and commissioning etc. as required.63amps 122 2.14.3:Supplying and fixing following rating, double pole, (single phase and neutral), 240volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes inthe existing MCB DB complete with connections, testing and commissioning etc. asrequired.63 amps 123 2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted including earthingetc. as required. (But without MCBIRCCB/Isolator8 way, Double door 124 5.17:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthingas required. 125 5.4;Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement andwatering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required 126 90.11.1.21:Supply and installation of sheet steel, phosphatised and painted, dust and verminproof enclosure of MCB DB including copper /brass bus bar, neutral link, earth busand DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchorbolts or fixed in recess including cutting hole on the wall , making good the damages,colour washing etc. as required12 way (8+12) - double cover TPN vertical DB withprovision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 127 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessed mediumclass PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire 128 OD13315/2025-2026:Supplying and fixing following 32amps modular DP switch and other accessories 129 OD13319/2025-2026:Supplying and fixing 12 Exhaust fan and other accessories 130 OD13314/2025-2026:Supplying and fixing angle batten with 23W CFL and other accessories 131 OD13316/2025-2026:Supply, installation, testing and commissioning of wall mounted Three Phase 4wireEnergy meter with poly carbonate body having range of 10-63A, with enclosure madeout of powder coated 16 SWG CRCA sheet suitable for fixing in surface/recess with 3nos. of 63A HRC fuses,63A TPN isolator, neutral link, its inter connections etc. Theenclosure shall have lockable door with glass window and all mounting accessoriesetc. complete as required (supply of energy meter is under KSEB scope) 132 OD13313/2025-2026:Availing electricity connection to the building including CD and other incidentalcharges. 133 OD13318/2025-2026:supplying and fixing 6A to 32A ratings,SP MCB and other accessories 134 OD13312/2025-2026;Supplying and fixing single tube set (electronics) and other accessories 135 OD13317/2025-2026;Supplying and fixing 48 ceiling fan and other accessories 136 WORK STATION AND FURNITURE 137 OD13306/2025-2026:Supplying airport type chair of 3 seater capacity Godrej make 138 OD13311/2025-2026:Providing modular work station using 1 nova pan on table top and 3/4nova pan on side pannel and with drawyer, keyboard tray etc, and the edges arefinished with PVC ban of suitable colour of nova pan and providing telescap channelon keyboard tray , drawyers and providing handles locking arrangement etc, complete-Pentagonal work station (L shape 1.55 x 1.75m) 139 OD13307/2025-2026:Supplying visitors chair with arm 140 OD13308/2025-2026:Supplying office chair (high back) 141 OD13309/2025-2026:Supplying office chair (midback) 142 OD13310/2025-2026:Supplying and fixing storage cupboard (Godrej) size 1.00x0.5x1.9m 143 OD13305/2025-2026:Supplying meeting table of dia 1m using manufacturing wood of required shade etccomplete 144 COMPUTER NETWORKING 145 OD13292/2025-2026:Supplying and fixing 0.5M PATCH CORD on bottom and grimping two ends 146 OD13298/2025-2026:Supplying and fixing 0.5M PATCH CORD on top and grimping two ends 147 OD13295/2025-2026:Engaging a computer engineer for programming all network and commissioning etccomplete (1 Rack x 2000 = 2000) 148 OD13299/2025-2026:Supplying and fixing rose set box and giving connection 149 OD13297/2025-2026:supplying and fixing 16 port switch and giving connection 150 OD13300/2025-2026:Providing network cabling using cat 6 cable through 1 case and caping andgiving connection including all labour charges material cost, grimping and connectingetc complete 151 OD13291/2025-2026:Supplying and fixing patch pannel and giving connection 152 OD13290/2025-2026Supplying and fixing 4U rack and giving connection 153 OD13292/2025-2026:Supplying and fixing 3M PATCH CORD and grimping two ends 154 OD13296/2025-2026:Supplying and fixing 2M PATCH CORD and grimping two ends 155 OD13294/2025-2026:Supplying and fixing 1M PATCH CORD and grimping two ends 156 TELEPHONE CABLING 157 OD13301/2025-2026Supplying and drawing two pair telephone cable through 1 case and caping andgiving connection 158 OD13303/2025-2026Supplying and fixing IO box set and giving connection 159 OD13302/2025-2026Supplying and fixing rose set box and giving connection 160 OD13304/2025-2026Supplying and fixing ordinary type telephone (BPL make) and other assessories
