Specified price schedule for the work Renovation and repairing work of newly alloted flat no. E/4=01 no Ordinary- A type flat of RHE Sahapur under Kolkata south sub division - III.- 1 Stripping off worn out plaster and raking out jointsofwalls,celingsetc.uptoanyheightandin any floor including removing rubbish within a lead of 75m as directed. 2 Cleaning the concrete surface by removing dirt and debris,marking dfective locations and removing loose concrete by careful stripping untill hard surface is exposed,cutting the concrete to regular shape,wire brushing the exposed surface and removing debris fromsite complete as per direction of the Engineer - in - Charge. 3 Removing corrode dwor nout portionofre in for cement (when the area of bar is damaged by more than25%)by cutting and replacing the same by a new plain round bar of requisite diameter by binding with require lap/welding with old bar, including cost of reinforcement,complete in all respect including removing unserviceable materials from site as per direction of the Engineer-in-charge. Note : Payment on weight (Kg.) of new reinforcement. 4 (a)Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties bymixing with water in proportion (1bonding agent :4 water: 6cement) as per Manufacturers specification [Cement to be supplied by the Department 5 Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P.M. fitted and fixedafter tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.CorX.P.M.&cost of all handling and scaffolding complete as per direction of Engineer-in -charge.c) 37.5mm thick 6 Taking out shutter of door and window, dismantling by parts (for repair or replacementof damaged parts),reassemblin gandre fittingand rehanging same with old fittings but with new screws as necessary. (Where different partsof same shutter are renewed under different item, payment under item 73 will be made once only). 7 Taking out door and window shutters and rehanging the same with old fittings.(a) With new iron screws. 8 Easing door and windows. 9 Style sand rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). In Ground Floor (ii) 35mm Thick shutter.(b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak. 10 Panel (made of single plank) of door and window shutters to design as directed (ii) 19mm thick panel of 30cm to 45cm width (b) Sishu,Gamar, Champ,Badam,Bhola, Mogra, Hallak 11 Iron butt hingesof approved quality fitted and fixed with steel screws,with ISI mark.(vi) 100mm. X 50mm. X 1.25mm. 12 (iii) 75mm. X 40mm. X 1.12mm. 13 Anodised aluminiumbarrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fittedand fixed with cadmium plated screws(iv) 150mm long x 10mm dia. bolt. 14 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) 15 Wooden sash bar50mm.X 35 mm.Upto1200 mm length with coach screw and flat iron clamps (40mm. X 6mm.) fitted and fixed complete in any position.(e) Local Sal. 16 Plaster(towall, floor, ceiling etc.) withsand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]i) With 1:6 cement mortar (b) 20 mm thick plaster 17 (ii) With 1:4 cement mortar 18 Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. 19 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 20 Acrylic Distemper to interior wall,ceiling with a coatof solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface 21 (A)Painting with best quality synthetic enamel paint of approved make and brand and including smoothening surface by sand paperingetc. Including using of approved putty etc. on the surface, if necessary(a) On timber or plastered surface :With super gloss (hi-gloss) (iii) One coat (with any shade except white) 22 (b) On steel or other metal surface :With super gloss (hi-gloss) (iii) One coat (with any shade except white) 23 Removal of rubbish,earth etc. from theworking site and disposal of the same beyond the compound, in conformity with theMunicipal / CorporationRulesforsuchdisposal, loadinginto truckandcleaning the site inall respect asper direction of Engineer in charge 24 Supplying, fitting&fixing1st quality Ceramic tiles in walls and floors to match with the existing work & 4nos. of key stones (10mm) fixed with aralditeat the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall WithSandCementMortar (1:3) 15mmthick&2mmthick cement slurry at back side of tiles using cement@2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative 25 Supplyingand laying true to lineand level vitrified tilesof approvedbrand(sizenot less than 600mmX600mmX10 mmthick) in floor, skirtingetc. set in20mmsandcement mortar (1:4)and2mmthickcement slurrybacksideof tilesusingcement@2.91Kg./sqMorusingpolymerisedadhesive(6mmthicklayerapplieddirectlyoverfinishedartificialstone floor/Mosaic etc without any backing course) laid after application slurryusing1.75Kgof cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colourof tiles / epoxy grout tmaterials of approved make as directed and removal of wax coating of top surface of tiles withwarmwater and polishing the tile susing so ftand dry cloth upto mirr or finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. 26 Supplying, fittingandfixingMarbleSlab/tileof15 to18mm thickness infloor, lobby, stair, landing&treadsetc.over20 mm(av.) thckbaseofCementmortar (1:2) laidwithwhitecementslurry@4.4kg/Sq.mbeforeplacingmarble&jointed with white cement slurry@2.0 kg/Sq.mwith necessary pigments including grinding andGranite polishing as per direction of Engineering-in-Charge in Ground Floor.{White cement and Pigment to be supplied by the Agency] 27 OrdinaryCement concrete (mix 1:2:4) with graded stone chips (20mm nominal size)excludingshuttering and rein for cement,if any, in ground floor as per relevant IS codes. 28 Supplying, fitting and fixing Black Stone slab use din Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar(1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.(b) Slab Thickness above 25 mm and upto 37.5 mm 29 PVC Door Shutter-30 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular L shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. 30 Labour for dismantling G.I. pipe with fittings.15 MM 31 20 MM 32 Supplying, fitting and fixing PVC pipes of approved make of Schedule80 (medium duty) conforming to ASTMD-1785and threaded to match with GI Pipes as per IS : 1239 (Part-I). withall necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fittedwith holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.(b) For ConcealedWorkCPVC pipes Class-I,SDR-1115mm 33 20 mm 34 Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittingsconforming to IS-15778: 2007(Q) Ball Valve20 mm 35 (V) Female threaded adopter(Brass threaded)15mm 36 (U) Male threaded adopter(Brass threaded)20 mm 37 (W) Female Elbow(Brass threaded)15 mm 38 Dismantling H.C.I. pipe with fittings including melting lead caulked joints100 mm 39 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i)Single Socketed 3 Meter Length110 mm 40 FittingsDoor Tee 110 mm 41 Door Bend (T.S.)110 mm 42 Cross Tee with Door110 mm 43 W.C. connector (150 mm long) 125 x 110 (W/WC Ring)75 mm 44 110 x 110 P Trap75 mm 45 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.Above ground100 mm 46 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etcWith P Trap 47 Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete.(a) E.W.C.(ii)Plastic (hallow type) white 48 Supplying, fitting and fixing10 litreP.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 49 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets (a) Sink only(i)530 mm X 430 mm x 180 mm 50 Supplying,fitting and fixing approved brand P.V.C.CONNECTORwhite flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.600 mm long 51 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C.waste pipe,with PVC coupling at one end fitted with necessary clamps900mmlong 52 Supplying, fitting and fixing bib cock or stop cock (e) PTMT (Polytetra Bib Cock / Stop Cock( Prayag or equivalent)15 mm 53 (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand). 54 Supplying, fitting and fixing shower of approved brand and make.(g) PTMT overhead shower ( Prayag or equivalent)(i) 75 mm round 55 Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete. 56 Dismantling E.P. or Anglo-Indian W.C 57 Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in positionon75mmX75mmX75mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii)550 mm X 400 mm size 58 Supplying, fitting and fixing pillar cock of approved make b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent) 59 Supplying, fitting and fixing PTMT Smart Shelf of approved makeof size 300 mm. 60 Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass(ii)25 mm dia. and 600 mm long 61 Supplying, fitting & fixing Aluminium domical grating125mm 62 Supplying,fitting,fixing Hand Shower (Health Faucet) with PVC flexible pipe (1m) long with wall hook.PTMT Hand Shower (Prayag or equivalent) 63 Sub Total 64 GST 18% 65 CESS 1%
