|
| 1 | Repairs to roof of F-1 Type Quarters (6 Block having 4 quarters in each block & 1 single block) of MPF at Ordnance Estate Ambernath |
| 2 | Dismantling Single layer Mangalore pattern or similar tiles in roofing carefully without damaging sewage and water pipe line electric wiring and building property and stacking serviceable itemsfor Credit Item and removing debris/ damaged tiles, etc all complete as directed by EIC |
| 3 | Dismantling Battens for tiles spaced exc 15cm, shingles etc, of any size carefully without damaging sewage and water pipe line electric wiring and building property and stacking serviceable itemsfor Credit Item and removing debris/ damaged batten, etc all completed as directed by EIC |
| 4 | S&F Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 , including cutting chases and repairing the same if required and providing bitumen gola etc all completed as directed by Engg in Charge. (Make : JSW Colouron/ Tata Durashine/ Essar)NOTE: Sample for pattern and colour shall be submitted forapproval ofCompetent Authority before execution |
| 5 | S&F Green Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick or manufacturer\"s specification ofan colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedincludingcutting chases and repairing the same if required and providing bitumen gola, etc all complete as directed by Engg in Charge(Make : JSW Colouron/ Tata Durashine/ Essar)NOTE: Sample for pattern and colour shall be submitted for approval of Competent Authority before execution. |
| 6 | S&F Green Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick or manufacturer\"s specification of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including cutting chases and repairing the same if required and providing bitumen gola, Etc all complete as directed by Engg in Charge. (Make : JSW Colouron/ Tata Durashine/ Essar)NOTE: Sample for pattern and colour shall be submitted forapproval ofCompetent Authority before execution |
| 7 | S&F thermal insulation hybrid XLPE air bubble sheet Nominal 15 mm thick laminated on both side with pure aluminum foil, bubble size 10mm x 4mm XLPE i.e chemically crossed linked, closed cell, polythen foam insulation having thermal conductivity of the best quality i.e 0.0329W/m.k at 23deg C . Suitable for wide temperature range from -40degCto +115 deg C , unaffected by most mild acids and alkai, offers high resistance to ingress of moisture , enhance overall acoustic property and reducing rainwater noise in metal roofing. Including cutting chases and repairing the same if required and providing bitumen gola etc all complete as directed by EIC. (Make:Arolam Ultra/ Star-Pack/ Tirisystem)NOTE: Sample shall be submitted forapproval ofCompetent Authority before execution |
| 8 | M&L Rolled sections of Hollow Square Section 50x50mm, 2.60mm thick as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including cutting chases and repairing the same if required and providing bitumen gola etc all complete as directed by EIC Sample should be approved before execution.(Make: Tata/ Sail/Jindal) NOTE: Sample shall be submitted forapproval ofCompetent Authority before execution |
| 9 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/ sqm) land on primed surface by forced application complete all as specified. Including removing existing waterproofing treatment including cutting chases and repairing the same if required and providing bitumen gola etc all completed as directed by EIC.(Make; Tiki Tar / Pedilite)NOTE: Sample shall be submitted forapproval ofCompetent Authority before execution |
| 10 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM1:4 including demolition for repairs etc all complete as directed by EIC. |
| 11 | M&L Rendering 20mm thick on fair faces of brick work or concrete surfaces (CM 1:4) including taking down removing plaster for repairs etc, all complete as directed by EIC |
| 12 | M&L for Cement paint two coats including preparation of new wall surfaces, applying priming plastered and other surfaces with alkali resistant priming paint etc, all completed as directed by EIC. |
| 13 | M&L Painting on Steel Surface of any description, over 10cm in width or girth, not otherwise described including preparation of new surface, one coat of red oxide, and two coats of synthetic enamel paint etc all complete as directed by EIC.(Make: Asian, Nerolac, Burger)NOTE: Sample shall be submitted forapproval ofCompetent Authority before execution |
| 14 | Credit Item:-Dismantled old Manglore Roof Tile, etc all complete as directed by EIC. |
| 15 | Credit Item:-Dismantled old 2nd class soft wood batten, etc all complete as directed by EIC. |
